• Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.317-322
• /
• 2011

This study was conducted to develop economical agricultural fertilizer media for the mass culturing of Nannochloropsis oceanica. Specific growth rates of N. oceanica cultured with differing concentrations of commercial compounds, urea fertilizers, and trace elements (Zn, Cu, Co, Mo) were compared with the growth rate in f/2 medium. Among the various added trace elements, $CuSO_4{\cdot}5H_2O$ was most effective for high growth of N. oceanica. The main nitrogen source in the agricultural fertilizers was ammonium, which was unsuitable for the growth of N. oceanica. Thus, the fertilizer at a lower concentration infused with $NaNO_3$ as a nitrogen source was more effective than fertilizer at higher concentrations. In this study, the growth of N. oceanica cultured with an agricultural fertilizer medium composed of compound fertilizer (41.7 mg/L), urea fertilizer (34.4 mg/L), $NaNO_3$ (150 mg/L), and $CuSO_4{\cdot}5H_2O$ (0.0588 mg/L) was similar to that of N. oceanica cultured in f/2 medium.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.117-126
• /
• 2008

RFID system the key technology of ubiquitous era, has been emphasized in logistics. Logistic enterprises are required to apply RFID systems considering their investment costs, actual effectiveness, operational satisfaction and so on. For such a purpose, many applicable methods of RFID system have been developed A method that RFID tags are directly attached to products or pallets is utilized in most cases. However, this method requires expensive investment cost, frequent replacement of damaged tags for the small and medium (SM) third party logistics. In this paper, we analyze statistically the current status and requirements of SM third party logistics. Based on their requirements, we propose the realtime warehousing-delivery management by the method to attach a RFID tag to each warehouse rack, together with the economy analysis index in order to evaluate economical efficiency. Consequently, this method is expected to reduce Investment cost and to improve operational effectiveness and satisfaction.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.33-54
• /
• 2016

In the modern society based on information and communication, which is exposed to the risks of a lot of information security breaches, corporate information assets may be an economical scale in a country. Most of damages derived from corporate technological information leak often occur in small and medium corporations. Although many information security managers in corporations have focused on certification systems such as information security management system, small and medium corporations are poorly aware of the information security, and their environments surrounding it should be also improved. In addition, it is difficult to expect spontaneous participations in it, since the sustainable information security management systems are often not forced to be certified. Thus, the purpose of this study is to examine plans to improve small and medium corporations' technological protections by using some component of the information security management system. On the basis of this examination, it also attempts to discuss some methods for effective and efficient information security in the small and medium corporations' technological protections.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.712-722
• /
• 2007

This study screened three natural ores (iron, mangenase, and zinc), two types of slags, and two elemental metals (elemental iron and zinc) to evaluate transformation characteristics of CAH mixtures [e.g. Carbontetrachloride (CT), 1,1,1-Trichloroethane (1,1,1-TCA), and Perchloroethene (PCE)]. To select an effective metal medium to treat the CAH mixtures, we measured transformation capacities (CAH mass ultimately transformed/mass of metal added) and the degree of dechlorination. We also considered economical efficiency of the metal media by comparing the value, CAH mass ultimately transformed divided by the price of metal medium added. A simplified mathematical model adapting CAH transformation capacity, first-order transformation kinetics, and available mass of metal transforming CAH was developed and used for estimating CAH transformation rate coefficient and longevity of the metal medium. CAH transformation capacity for elemental iron and elemental zinc were 4258~7129 and $4215{\sim}6330{\mu}g\;CAH\;transformed/g$ metal added, respectively, which are a factor of 80~200 higher than slags and natural ores. They also showed a factor of 1.1 to 2.2 greater degree of dechlorination than the others. Among natural ores and slags, Zinc ore showed the highest transformation capacity, $47{\sim}53{\mu}g\;CAH\;transformed/g$ metal added. Although zinc ore have smaller transformation capacity than elemental metals, economical efficiency of zinc ore is a factor of 10~20 greater than elemental metals tested. Consequently, zinc ore would be more economical medium than the others tested in this study. We estimated the pseudo first-order transformation rate of zinc ore was in the order of CT > 1,1,1-TCA > PCE.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.58-63
• /
• 2007

A compact gun drill machine was developed to improve productivity and economical efficiency for small and medium enterprise tool makers. Gun drilling works are mainly using at molding, automobile, aircraft industry and special tool makers to make deep holes. As gun drill machines are very expensive and big burden for small tool makers, so that works used to execute through outside orders but it was required lot of cost too. Most of gun drill machines are providing for high volume and large capacity enterprises. In order to use for small and medium enterprises that compact gun drill machine was designed and developed. It could be improved product quality, productivity and manufacturing cost for small and medium enterprises by using this machine.

• Microbiology and Biotechnology Letters
• /
• v.47 no.3
• /
• pp.364-371
• /
• 2019

The use of GRAS microorganisms isolated from fermented foods during amylase production using an economical food-waste medium provides more opportunities to produce amylase with a wider range of applications. Hence, this study aimed to isolate a good amylase-producing fungi from the traditional Indonesian fermented cassava, gatot, and to identify the amylase-producing capability of the isolate in a potato peel waste (PPW) medium. Black-colored fungi isolated from gatot was morphologically identified and the amylase produced was characterized using SDS-PAGE and Native PAGE. The isolate was then grown on PPW medium, and the amylase produced was further characterized. Morphological identification and enzyme characterization revealed that the Aspergillus niger aggregate F isolated from gatot secreted an active extracellular ${\alpha}$-amylase with an optimum pH of 5-6. In conclusion, Aspergillus niger aggregate F isolated from gatot can be used to produce ${\alpha}$-amylase using PPW as a medium.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.12
• /
• pp.1982-1992
• /
• 2019

The alkaliphilic, calcium carbonate precipitating Bacillus sp. strain AK13 can be utilized in concrete for self-repairing. A statistical experimental design was used to develop an economical medium for its mass cultivation and sporulation. Two types of screening experiment were first conducted to identify substrates that promote the growth of the AK13 strain: the first followed a one-factor-at-a-time factorial design and the second a two-level full factorial design. Based on these screening experiments, barley malt powder and mixed grain powder were identified as the substrates that most effectively promoted the growth of the AK13 strain from a range of 21 agricultural products and by-products. A quadratic statistical model was then constructed using a central composite design and the concentration of the two substrates was optimized. The estimated growth and sporulation of Bacillus sp. strain AK13 in the proposed medium were 3.08 ± 0.38 × 10⁸ and 1.25 ± 0.12 × 10⁸ CFU/ml, respectively, which meant that the proposed low-cost medium was approximately 45 times more effective than the commercial medium in terms of the number of cultivatable bacteria per unit price. The spores were then powdered via a spray-drying process to produce a spore powder with a spore count of 2.0 ± 0.7 × 10⁹ CFU/g. The AK13 spore powder was mixed with cement paste, yeast extract, calcium lactate, and water. The yeast extract and calcium lactate generated the highest CFU/ml for AK13 at a 0.4:0.4 ratio compared to 0.4:0.25 (the original ratio of the B4 medium) and 0.4:0.8. Twenty-eight days after the spores were mixed into the mortar, the number of vegetative cells and spores of the AK13 strain had reached 10⁶ CFU/g within the mortar. Cracks in the mortar under 0.29 mm were healed in 14 days. Calcium carbonate precipitation was observed on the crack surface. The mortar containing the spore powder was thus concluded to be effective in terms of healing micro-cracks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1110-1119
• /
• 2006

If water flows through a narrow passage into a medium that keeps the equilibrium of temperature, it causes small temperature difference and makes a temperature anomaly. The seepage or leakage often observed at old dams is a representative example of bringing about a temperature anomaly. Therefore, temperature measurements have been regarded as one of excellent methods that can detect the situation of seepage or leakage. However, because existing temperature measurement methods are based on a single sensor, the application of the method to the whole structure is nearly not possible in technical and economical phases. This paper introduces a temperature monitoring system using a thermal sensor cable that is comprised of addressable thermal sensors connected in parallel at many positions within a single cable. Through various laboratory and field experiments, it has been proved that the temperature monitoring technique can give an useful information about permeability of a medium or connectivity of fractures which have been regarded as difficult problems.

• The Korean Journal of Mycology
• /
• v.23 no.3 s.74
• /
• pp.197-201
• /
• 1995

For 2 years $(1993{\sim}1994)$, study on development of cheap medium for Pleurotus ostreatus revealed that paper sludge contain more CaO and similar T-C, T-N, $P_2O_5$, MgO but less $K_2O$ than any other medium material in chemical property. Mixed treatment (rice straw + paper sludge 10, 30, 50%, cotton waste + paper sludge 10, 30, 50%, cotton waste + rice hull 20 + paper sludge 10, 30, 50, 70%) is similar or fast a little in mycelial growth and is similar or fast $1{\sim}2$ day in period of primordia formation than cotton waste medium, and in the yield to each medium type also increased but excepted in rice hull 20% + paper sludge 70%, especially mixed medium at 7:3 ratio of cotton waste and paper sludge is best treatment because it is increased to 21%. In economical analysis, mixed medium at 7:3 ratio of cotton waste and paper sludge is increased to 50% compared to cotton waste medium in relative income.

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.77-86
• /
• 1976

This study was attempted to know that the interactions of various fungi, and methionine and $MgSO_4$ introduced as the substrate of culture media for fungi were affected to produce aflatoxins by Asp. flavus. 5 different fungi were isolated from the fermented soybean mash and were cultured in Chemically Defined medium (C. D. media) and soybean mash at $25^{\circ}C$ for 10 days. (1) It was confirmed that Asp. flavus produced aflatoxins in the C. D. medium and soybean mast, but that Asp. niger, Asp. oryzae, Asp. awamori and Asp. terreus did not produced them respectively. (2) Asp. flavus cultured with Asp. niger did not produce aflatoxins in C. D. medium, but produced in soybean mash, in other hand, Asp. flavus with other fungi except Asp. niger produced aflatoxins in C. D. medium and soybean mash. (3) The growth of fungi were more prosperous in the seperate culture than in the mixed culture. (4) In the C. D. medium added 20% of cultured medium of Asp. niger, Asp. flavus did not produce aflatoxins but other cultured medium did not prohibit the production of aflatoxins by Asp. flavus. (5) On the contrary, $MgSO_4$ increasing the productivity of aflatoxins by Asp. flavus in the C. D. medium, methionine known as one of precursor of aflatoxins did not affected the increasing productivity with significance.