• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.105-112
• /
• 2005

This study aims at evaluating the environmental impacts stemmed from the End-of-Life Vehicle(ELV) treatment systems in Korea, using Life Cycle Assessment(LCA) method. In this study, both environmental burden from the ELV dismantling process & recycling processes and environmental benefit which were derived from the avoided environmental impacts by substituting recycled materials for virgin materials were considered. First of all, the key issues which were defined as the environmental aspects that account for more than $1\%$ out of the total environmental impacts were identified from the Life Cycle Impact Assessment(LCIA). $CO_2$, crude oil, natural gas, coal, etc. were found out to be the key issue parameters. From the LCI Analysis and LCIA studies, it was shown that the significant environmental aspects were related with the recycling process of ferro scrap, the shredding process of compressed car bodies and the dismantling process of end-of-life engines. In particular, the recycling process of ferro scrap has the most significant effects on the environmental impacts of the ELV treatment systems. Based on these results, it is recommended to improve the recycling process of ferro scrap in order to make the ELV treatment systems more environmentally sound.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.269-279
• /
• 2013

In this paper, an environmental assessment was carried out on the whole process of industrial business activities to establish a basic plan for climate change mitigation and energy independency. The whole process was divided into each discharge process in terms of water, air, solid waste, green house gases and refractory organic compounds. The flowcharts and basic unit of process were analysed for three years (2008-2010), being utilized as basic information for the life cycle assessment. It was found that the unit loading for the whole process significantly depends on changes in the operation rate change and highly concentrated wastewater inflow. About 35% of solid waste production was reduced by improving the incineration method with co-combustion in coal boiler, generating about 57% of electricity used for the whole process, and consequently reducing the energy costs. As the eco-efficiency index was found to be more than 1, compared to the previous years, it can be said that improvement in general has taken place.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.3
• /
• pp.60-75
• /
• 2004

The purpose of this research is to evaluate five types of eco-village planning in order to introduce a landscape unit concept and theory in Korea. Although they had different backgrounds and motives of eco-villages planning, their common goal is to always maintain ecological planning and design in their villages. As concrete methods of ecological planning, we suggest three fundamental planning theories. 1. The boundary of a plan unit should be a watershed. 2. The survey and analysis of village ecotopes should be done in that defined watershed. 3. These results should be applied in the site and lot planning of eco-villages. These 3 steps should be done in a process and relevantly. In the evaluation of the five eco-village planning types, we found three results. 1. On a viewpoint of watershed, most planners recognized a watershed in survey and planning stages unconsciously. But they did not mention watersheds concretely and did not use this concept in the planning stage. 2. They did not define the concept of ecotope, but most planners recognized land-uses and vegetations of villages and vicinities as ecotopes. Also these could be proper ecotopes, but they did not use these compartment of ecotopes in the planning of ecosystem structure in villages. In addition, they did not deeply survey and analyze the ecotopes of villages and its vicinity. 3. On the viewpoint of sites and lots planning, they did not relevantly use the characteristics of watersheds and ecotopes in sites and lots planning. Therefore, they failed to implement the indigenous lots and subdivisions plan. In the size of lots and sites, they did not seriously consider the carrying capacity of ecosystem. We hope that our suggestion about the establishment of eco-villages planning is a fundamental theoretical framework of ecological planning in future eco-village planning.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.499-503
• /
• 2012

The present study is intended to comparatively investigate the changes in microstructure and tensile properties at room and elevated temperatures in commercial AM50(Mg-5%Al-0.3%Mn) and 0.3 wt%CaO added ECO-AM50 alloys produced by permanent mould casting. The typical microstructure of AM50 alloy was distinctively characterized using two intermetallic compounds, ${\beta}(Mg_{17}Al_{12})$ and $Al_8Mn_5$, along with ${\alpha}$-(Mg) matrix in an as-cast state. The addition of a small amount of CaO played a role in reducing dendrite cell size and quantity of the ${\beta}$ phase in the AM50 alloy. It is interesting to note that the added CaO introduced a small amount of $Al_2Ca$ adjacent to the ${\beta}$ compounds, and that inhomogeneous enrichment of elemental Ca was observed within the ${\beta}$ phase. The ECO-AM50 alloy showed higher hardness and better YS and UTS at room temperature than did the AM50 alloy, which characteristics can be mainly ascribed to the finer-grained microstructure that originated from the CaO addition. At $175^{\circ}C$, higher levels of YS and UTS and higher elongation were obtained for the ECO-AM50 alloy, demonstrating that even 0.3 wt%CaO addition can be beneficial in promoting the heat resistance of the AM50 alloy. The combinational contributions of enhanced thermal stability of the Ca-containing ${\beta}$ phase and the introduction of a stable $Al_2Ca$ phase with high melting point are thought to be responsible for the improvement of the high temperature tensile properties in the ECO-AM50 alloy.

• Clean Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2003

In order to implement clean technology to Petro-chemical process, simulation package of given process should exist. In this paper, reaction and recycling parts of a process are explained using EA process and MEK process respectively so as to explain how to make simulation package. Based on simulation package, several options are generated and feasibility tests are performed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.1-19
• /
• 2012

According as gradually increasing the demand for eco-friendly at the printing process, it has been progressed fairly development. Especially, the inks are used by soy oil beginning of ink industry for preventing environment, it is possible to make eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents at all for preventing environment. These eco-friendly inks have a benefits they are able to use the renewable resource. But basically vegetable oils have that reduce the VOC(Volatile Organic Compound) and high viscosity, high solubility properties. So if the vegetable oils use in the ink, set off problem occur on the paper because of slow drying time. In case of vegetable ester, it has similar the molecular weight and kinetic viscosity with hydrocarbon solvent, it is able to control the power of dilution about the resin. So, it has benefit that solve the problem of the existing eco-friendly inks. In this study, different types of ester were made by six types of vegetable oils and used ester in the varnishes and inks properties are comparison with hydrocarbon solvent based ink. By considering the intrinsic properties of vegetable oil, ester used to analyze the changes in ink properties, using ester varnish is applied to study the rheology characteristics and emulsification with inks.

• Carbon letters
• /
• v.24
• /
• pp.1-9
• /
• 2017

We studied the basic properties and fabrication of reduced graphene oxide (rGO) prepared using eco-friendly reduction agents in the graphene solution process. Hydrazine is generally used to reduce graphene oxide (GO), which results in polluting emissions as well as fixed nitrogen functional groups on different defects in the graphene sheets. To replace hydrazine, we developed eco-friendly reduction agents with similar or better reducing properties, and selected of them for further analysis. In this study, GO layers were produced from graphite flakes using a modified Hummer's method, and rGO layers were reduced using hydrazine hydrate, L-ascorbic acid, and gluconic acid. We measured the particle sizes and the dispersion stabilities in the rGO dispersed solvents for the three agents and analyzed the structural, electrical, and optical properties of the rGO films. The results showed that the degree of reduction was in the order L-ascorbic acid ${\geq}$ hydrazine > glucose. GO reduced using L-ascorbic acid had a sheet resistance of $121k{\Omega}/sq$, while that reduced using gluconic acid showed worse electrical properties than the other two reduction agents. Therefore, L-ascorbic acid is the most suitable eco-friendly reduction agent that can be substituted for hydrazine.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.37-47
• /
• 2006

The city of Siheung in the Kyunggi-do Province has various natural resources such as the ocean, mountains, wide farmland, various types of wetlands, streams and rivers. In addition, the city has a big greenbelt, which consists of two-thirds of the area, where development has been regulated. Since the city has a relatively well-preserved natural environment, it offers a great potential for regional development. The purpose of this study is to create an eco-tourism resource plan for the Mulwang reservoir, which offers many opportunities for ecotourism in the city of Siheung. This study includes a literature review for planning elements and suggests a comprehensive plan that includes conservation, eco-restoration, route program and practice program for ecotourism in and around the site. The plan also includes eco-farming, a visitor center, an ecovillage, the chance to experience livestock farming, opportunities to learn about and experience the forest, tracking, eco-learning, an environmental interpretation facility, fishing and aquatic-oriented leisure activities. This study's process and results show possibilities that can be applied to other areas where eco-tourism using natural resources is used for regional development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.522-530
• /
• 2009

In this paper, we propose an efficient methodology to fix timing violation in ECO step for ASIC process. Timing violation can occur from various reasons and the major cause is inconsistent correlation between EDA tools. The most frequent violation is setup time and hold time violation. First, we analyzed the reason of violation creation, and then proposed the adjusting method for overcome them. Each violation can be fixed by increasing data required time or decreasing data arrival time. We proposed the detailed technique on a case basis. It is difficult to execute these methods by routine of algorithm or principle. Therefore ASIC engineer needs to apply these technique to violation as conditions of the implemented design.