• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.729-732
• /
• 2008

Naphthalenic admixture(PNS) has been widely used as main component of AE reducing agent among superplasticizers for concrete for a long time. However its noxiousness has been appointed because of formaldehyde compound applied during in synthetic process. In this study, AE reducing agent prepared using PNS and substituted-PNS agent(ECO-AEM) without formaldehyde compound added to concrete. For these agent, the basic performance of concrete and ecological affinity properties were evaluated and compared.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.605-609
• /
• 2008

This work describes the preparation of functionalized magnetic nanoparticles(MNPs) and their bioapplication to human DNA separation. Silica coated MNPs were prepared by changing the volume ratio of tetraethyl orthosilicate(TEOS) for controlled coating thickness on the original nanoparticle of MNPs. The sol-gel process in silica coating on MNPs surface was adapted for relatively mild reaction condition, low-cost, and surfactant-free. And then amino functionalized magnetic nanoparticles were synthesized using amine groups as surface modifiers. The result of adsorption efficiency for human DNA with amino-functionalized silica coated MNPs was calculated as a function of the number of amine groups.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.50-60
• /
• 2009

A spatial decision making process is needed when a local government tries to make polices and plans for eco-tourism in urban and regional site scale. This study aimed to suggest an assessment model to support spatial decision making on planning and making polices for eco-tourism. The model composes 6 stages of 'setting up ecogeographic territories'. 'value analysis method as ecotourism resources' 'synthetic assessing', 'grading values', 'selecting main resources for ecotourism' and 'spatial decision making support'. Applying the model to Shiheung city in Kyounggi province, validity was secured. By using the model, it was possible to make some decisions effectively such as selection of ecotourism resources, decision of the priorities of polices for ecotourism, and setting up the type of ecotourism to be introduced. In addition, by visualizing high valued resources and areas for ecotourism it w possible to support to make plans and policies effectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.118-119
• /
• 2017

In the S.C.W (soil cement wall) grouting solution, Cement grout ratio of 1 part Portland cement and 1part water is being used. However, Co₂ and harmful heavy metals such as cr6+ are discharged in the process, causing a serious environmental issue. The purpose of the present study is therefore to substitute cement grout to inorganic binder and identify durability properties of ground solidification materials.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.31-38
• /
• 2007

Recently produced concrete has a tendency to overcome environmental defects. Porous and planting Eco-concrete requires the neutralization process and enough void in concrete to contain water, to pass air freely, and provides necessary nutrients to vegetation roots. The biological environment in concrete is not suitable for planting because the concrete possesses strong alkali constituent of pH 11-13. This study evaluated the strength and serviceability of concrete as well as the chemical characteristics of concrete mixed by low-grade iron ore left in the abandoned mine and treated by Ammonium monohydrogen phosphate, $(NH_4)_2HPO_4$. Test variables include two kinds of coarse aggregates such as crushed stones and low-grade iron ore, the duration time and the period for neutralization treatment by Ammonium monohydrogen phosphate, $(NH_4)_2HPO_4$, and the proportion ratio of cement, blast furnace slag and silica fume.

• Particle and aerosol research
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2020

The characteristics of particulate matter made from daily cooking at a Korean residential apartment house with three dwellers had been investigated for about 3 months. All data were recorded by an optical particle counter every minute at the kitchen. Types of cooking such as boiling, frying, and grilling that performed in the house were listed. Boiling only was used in 32% cases among total 234 meals. Frying and grilling were 14% and 11%, respectively. From an initial indoor particulate matter smaller than 10 ㎛ in diameter, the increases due to cooking are reported by size. In case of boiling, PM at 1-10 ㎛ size and under 1 ㎛ size little increased. Normally, particles from oil or combustion in a process of frying or grilling increased indoor PM. In a case of grilling, particle mass concentration in a region of 1-10 ㎛ in diameter increased as much as 295 ㎍/㎥. Mass concentration of particles smaller than 1 ㎛ increased as much as 33 ㎍/㎥.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.161-165
• /
• 2015

The Permanent Magnet Brushless DC (PMBLDC) motors have been used in modern industrial factories, hazardous chemical process, modern medical devices, and especially in advanced military devices such as army drones. By considering their sensitive role in the industrial and military applications, their optimal design has a real concern. This paper proposes a method for optimal eco-design of a PMBLDC motor using improved tabu search optimization. The objective function is based on losses, volume and cost. Electrical and mechanical requirements and other limitations are combined into constraints of problem. Also, finite element analysis has been used for verifications in magnetic mode.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.59-60
• /
• 2011

The purpose of this study is to produce the low-carbon eco-friendly inorganic composite at room temperature by an alkali accelerator without firing process at high temperature, and complement the problem of previous studies, the deterioration in strength caused by cracking, with incorporation of PVA fibers. Results of reviewing the changes in the strength properties of PVA showed that test body mixed with PVA fibers had the superiority in strength expression.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.96-98
• /
• 2004

At the previous papers, we showed that K2O-CaO-P2O5 glasses had a solubility in air so that they could be used for glass fertilizer. In this work, we fabricated the Eco-glass fertilizer containing trace elements such as B, Mg, Zn, Fe, Cu, Co, and Mo by a melt-quenching process and the dissolution properties of these glasses were investigated with pH meter and ICP analyzer. In case of the glasses containing the trace elements, effect of trace elements on the dissolutions is not obvious and ignorant the stability of mother glass. Also, the dissolution amounts of each trace elements depend on the mother glass composition and the quantity of each trace element, and mother glasses determined the dissolving velocity of chemical elements.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.53-60
• /
• 2015

The ECO2 building energy simulation program is used on the assessment project for building energy certification of non-dwelling buildings in Korea. In the design of energy efficient buildings, it is beneficial to identify the most important design parameters in oder to more efficiently develop alternative design solutions or reach optimized design solutions. The sensitivity analyses will be used at a reasonable early stage of the building design process, where it is still possible to influence the most important design parameters. In this study, the sensitivity analysis is focused on building envelope parameters such as U-values, SHGC and Wall-window ration.