• 한국의상디자인학회지
• /
• 제13권4호
• /
• pp.111-126
• /
• 2011

Cultural collage phenomena came to the fore where various differing elements combined to make a reality in the post-modern culture. Collage, a technique with which to express a unique sense of texture has been used since a long time ago by fashion illustrators, finds itself expressed in much more diverse forms and characteristics, and its meanings changed, too. The purpose of this study is to analyze the formative characteristics of collage as expressed in fashion illustrations since 2000s and look into its aesthetic meanings, and in doing so, examine effects of changes along the times that have sought plural diversity on fashion illustrations. This study selected and examined from various collage techniques three collage expression techniques including papier colle, photo montage and assemblage frequently used as techniques of fashion illustrations. Papier colle technique expressed in fashion illustration simplify forms, thereby stressing linear elements, and express lines and planes At the same time, such works provide depth to planar spaces by overlapping objects and putting together differing elements, In fashion illustrations utilizing photo montage more than one images taken from photos are cut up and reconstructed, where illusory and sometimes shocking images are conveyed through particular forms or unrealistic compositions created by casual combination of unrelated images. Unique and eccentric images are conveyed by means of assemblage through the combination of various kinds of heterogeneous materials in fashion illustrations. This not only conveys fashion images sensitively but presents each fragment as objets regardless of its original functions, and attempts at new concepts.

• Steel and Composite Structures
• /
• 제19권4호
• /
• pp.917-937
• /
• 2015

During a seismic event, a considerable amount of energy is input into a structure. The law of energy conservation imposes the restriction that energy must either be absorbed or dissipated by the structure. Recent earthquakes have shown that the use of concentric bracing system with their low ductility and low energy dissipation capacity, causes permanent damage to structures during intense earthquakes. Hence, engineers are looking at bracing system with higher ductility, such as chevron and eccentric braces. However, braced frame would not be easily repaired if serious damage has occured during a strong earthquake. In order to solve this problem, a new bracing system an off-centre bracing system with higher ductility and higher energy dissipation capacity, is considered. In this paper, some numerical studies have been performed using ANSYS software on a frame with off-centre bracing system with optimum eccentricity and circular element created, called OBS_C_O model. In addition, other steel frame with diagonal bracing system and the same circular element is created, called DBS_C model. Furthermore, linear and nonlinear behavior of these steel frames are compared in order to introduce a new way of optimum performance for these dissipating elements. The obtained results revealed that using a ductile element or circular dissipater for increasing the ductility of off-centre bracing system and centric bracing system is useful. Finally, higher ductility and more energy dissipation led to more appropriate behavior in the OBS_C_O model compared to DBS_C model.

• 한국전문물리치료학회지
• /
• 제7권1호
• /
• pp.22-31
• /
• 2000

Despite research to treat delayed onset muscle soreness (DOMS), no effective treatment has been reported. The purpose of this study is to investigate the effect of a hold-relax technique and cryotherapy on DOMS. Thirty-three subjects were randomly assigned to one of three treatment groups: control, hold-relax technique, or hold-relax technique and cryotherapy. DOMS was induced in the non-dominant biceps muscle through repeated eccentric contractions. Resting elbow joint position, flexion and extension (universal goniometer), pain (Visual Analogue Scale; VAS), and WBC count (blood analysis) were measured one hour before DOMS was induced and 24, 48, and 72 hours after DOMS was induced. The data were analyzed by repeated measure of two-way ANOVA. The results of this study were summarized as follows: 1) While analysis showed no significant differences between groups in relation to a resting elbow joint position, there were significant differences over time, especially at 24, 48 hours after DOMS was induced compared with resting elbow joint position before DOMS was induced. 2) While analysis showed no significant differences between groups in relation to range of flexion, there were significant differences between range of flexion before DOMS was induced and range of flexion 72 hours after DOMS was induced. 3) There were no significant differences between groups or over time in relation to range of extension. 4) While analysis showed no significant differences between groups in relation to VAS, there were significant differences over time in different hours. 5) There were no significant differences between groups or over time in relation to WBC count. 6) There were no interactions between groups or over time in all variables. This results suggested that hold-relax technique and cryotherapy were not effective to reduce DOMS.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.949-960
• /
• 2002

횡하중을 받는 플랫 플레이트 구조는 슬래브-기둥 접합부의 뚫림전단파괴에 대해 취약하며, 이러한 접합부의 취성적 파괴를 방지하기 위해 접합부의 강도 및 연성능력이 반드시 확보되어야 한다. 그러나 플랫 플레이트 시스템의 거동은 대단히 복잡하고 실제 하중재하방식과 경계조건을 정확히 실현하기는 매우 어려우므로, 이전의 실험연구로부터 강도 및 연성능력에 대한 신뢰할 만한 실험결과를 얻기가 쉽지 않다. 본 연구에서는 이러한 실험연구의 어려움을 보완하기 위하여 연속 플랫 플레이트의 내부 접합부에 대해 수치해석 연구를 수행하였다. 이를 위해 비선형 유한요소해석을 위한 컴퓨터 프로그램을 개발하였고, 기존의 실험결과와의 비교를 통해 그 유효성을 검증하였다. 변수연구를 통하여 접합부 주위의 휨모멘트, 전단력, 비틀림모멘트의 변화를 분석하였고, 분석결과에 근거해서 기존 설계방법에서 개선되어야 할 사항을 검토하였다. 본 연구결과는 후속논문에서 불균등 휨모멘트를 받는 접합부에 대한 설계방법을 개발하는데 사용될 것이다.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.678-683
• /
• 2016

The study aim was to investigate a comparison of muscle activity fatigue between maximal and submaximal strength gains during the bench press in men. It was hypothesized that maximal voluntary contraction (%MVC) would similar gains between maximal and submaximal strength gains during the bench press, but median frequency (MDF) would increase in maximal compared with submaximal exercise. Employing a randomized, counterbalanced crossover design, 12 men were asked to perform maximal repetitions and submaximal repetitions (concentric: 1-s, eccentric: 1-s, 2-s/repetition) to failure with a load of 85% of 1RM for the bench press, with a 3-minute recovery between the sets. Each subject was tested for the number of repetitions and sets, total work in bench press. Surface electromyography (EMG) was recorded from the pectoralis major, deltoid anterior, and triceps brachii for %MVC and MDF. Total work was significantly higher in the submaximal repetition exercise than that the maximal repetition exercise (p<.05). Muscle fatigue of pectoralis major, deltoid anterior and triceps brachii were significantly smaller in the submaximnal repetition exercise than that the maximal repetition exercise (p<.05, respectively). However, muscle activity of pectoralis major, deltoid anterior, and triceps brachii were not significantly different between exercises. Our study showed that a smaller muscle fatigue in submaximal repetitions, despite higher in total work and a similar in muscle activity were observed. These results suggest that submaximal repetitions during the bench press would be enhanced intensity and/or volume compared with maximal repetitions exercise.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.206-215
• /
• 2013

In this paper, a synchronization control technique of dual-servo motor driven press system is proposed. An independent cascade PID control technique has been applied to the conventional press system for advancement of control stability. However, it is not easy to reduce synchronous error using the independent cascade PID control technique when some different load disturbances are involved in each motor. The eccentric error of the slide caused by the problem degrade the control performance of the BDC(Bottom Dead Center). In order to achieve reduction of the synchronous error between two servo motors and accurate position control simultaneously, a new control scheme comprised with cascade PID control loop and cross-coupling loop is proposed. In simulation using Matlab SIMULINK, the AC servo system is designed. The control performance of proposed technique is compared with conventional control technique to the model of AC servo system. Also, the sub-scale model of dual-servo motor driven press system which can replicate the slide motion is constructed for experimental verification for the performance of the proposed control technique. The cross-coupling control technique reveals more precise and stable performances in the position and synchronization controls.

• 영어어문교육
• /
• 제17권4호
• /
• pp.141-156
• /
• 2011

This study purposes to explore the narrative of fictional events complicated by a specific narrator, taking notice of his/her role as an internal focalizer as well as an external participant. In William Faulkner's "A Rose for Emily," the story of an eccentric spinster, Emily Grierson, is focalized and narrated by a townsperson, apparently an individual, but one who always speaks as 'we.' This tale-teller, as a first-hand witness of the events in the story, details the strange circumstances of Emily's life and her odd relationships with her father, her lover, the community, and even the horrible secret hidden to the climactic moment at the end. The narrative 'we' has surely watched Emily for many years with a considerable interest but also with a respectful distance. Being left unidentified on purpose, this narrative agent, in spite of his/her vagueness, definitely knows more than others do and acts undoubtedly as a pivotal role in this tale of grotesque love. Seamlessly juxtaposing the present and the past, the collective 'we' suggests an important subject that the distinction between the past and the present is blurred out for Emily, for whom the indiscernibleness of time flow proves to be her hamartia. The focalizer-narrator describes Miss Emily in the same manner as he/she describes the South whose old ways have passed on by time. Like the Old South, Emily is desperately trapped in the past, since she has not been able to adjust to the changes brought on by time. In the end, the tragic story of Emily Grierson which takes place in Jefferson plainly seems to serve as an introduction to mature Faulkner.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.37-52
• /
• 1989

The purpose of this study was to investigate the relationship between sternocleidomastoid (SCM) and masseter muscles during occlusal functions by means of EMG recordings of examined muscles. For the study, eighteen normal subjects were selected and the Bio-electric Processor EM2 (Myo-tronics Research, Inc., U.S.A.) with the surface electrodes was used to record the EMG activity from the right and left middle of masseter and insertion of SCM of each subject during right and left gum-chewing and isometric contraction by changing the biting force at right eccentric position of jaw. The amount of biting force ranged from 5 to 70kg during isometric contraction were measured by use of Jaw Force Meter. (Nihon Koden Kogyo, Japan.) The results were as follows: 1. The activity onset of SCM and masseter on the same side was almost at the same time, and integrated EMG values of two muscles on the chewing side were higher than the same named muscles on the non-chewing side during gum-chewing. (p<0.01) 2. The regression correlation was not present between both masseters (p>0.05), but between both SCM muscles or muscles of two kinds on the chewing or non-chewing side. ($p{\leqq}0.05$) 3. The integrated EMG value of SCM on chewing or non-chewing side were about 10 percent of that of ipsilateral masseter. 4. Mean voltage of each examined muscles were almost proportional to biting force during isometric contraction and the slope of voltage/biting force line was steepest at the ipsilateral masseter, followed by contalateral masseter, ipsi- and contra-lateral SCM muscles. 5. Mean voltage of ipsilateral masseter was highest during isometric contraction, followed by ipsilateral masseter, contra- and ipsi-lateral SCM muscles.

• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.107-116
• /
• 2013

Objectives The purpose of this study was to evaluate the most effective stimulating electrode in Microcurrent electrical neuromuscular stimulation (MENS) for pain relief, and to apply to the treatment of Delayed onset muscle soreness (DOMS). Methods We included 45 participants who met the inclusion criteria. DOMS of both Triceps Surae Muscles were experimentally induced through eccentric contractions. 24-hours after induction of DOMS, who scored more than 40 mm in visual analogue scale (VAS) were randomly assigned into three groups (n=44). In 15 of them, needle electrodes were inserted into BL57, BL56. In 15 of them, surface electrodes were applied on the same points and the others were treated with manual acupuncture. The effects of pain relief were assessed by visual analogue scale (VAS), mechanical pain threshold (MPT), surface electromyography (SEMG). Results In VAS, group comparison had no significant difference after all treatments had done. The difference in VAS between the time before the treatment was started (Day 2) and after all treatments were completed was greater in Acupuncture group than that of needle-electrode group. In MPT, there was no significant difference among groups. Electrical contraction decreased significantly at 2nd before-after treatment comparison in needle-electrode MENS group. But fatigue scores were not significantly different between groups. Conclusions The results suggest that the types of electrodes has no significant effect on microcurrent therapy in DOMS.