• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.266-274
• /
• 2017

The purpose of this study was to analyze the number of visitors to the top of Seoseokdae in Mudeungsan National Park, in which visitors are concentrated, and their visiting patterns, thereby suggesting measures to manage the visitors. The number of annual visitors and the numbers of regional and seasonal visitors to Mudeungsan National Park, which affect the concentration of visits to Seoseokdae were analyzed using the data produced by an automatic digitizing device. A field study was conducted to examine the number of seasonal and periodic visitors to Seoseokdae and their visiting patterns. In 2015, the number of visitors was 2,563,651 and 83.9% of the visitors visited via the Jeungsimsa and Wonhyosa area that is near Gwangju City. This area is close to the Seoseokdae area and it is easy to hike between the areas. Therefore, there was an influx of most visitors to Seoseokdae into the Jeungsimsa and Wonhyosa area. In terms of seasonal visitors, the largest number of visitors came in the fall, followed by the summer, spring, and winter in order. However, the seasonal differences were not notable. There was no statistically significant correlation between the number of visitors and meteorological factors. This result may have been because Gwangju citizens frequently visit Mudeungsan regardless of period and weather. Visitors can get to Seoseokdae via the trails into Wonhyosa and Jangbuljae. A slightly larger number of visitors used the trail into Jangbuljae in the fall and winter, whereas a larger number of visitors used the trail into Wonhyosa in the summer. In general, there is a large influx of visitors into Jangbuljae, a strategic visiting point. However, a slightly larger number of visitors may have chosen the trail into Wonhyosa in the summer because they could hike under the shade of trees. In the summer, visitors stayed in Seoseokdae for a short time with a low level of crowdedness. On the other hand, in the fall and winter, visitors stayed in the area longer because they had lunch and rested. During the time, the number of momentary maximum visitors peaked, causing extreme crowdedness. Therefore, some visitors showed the visiting pattern of entering the grassland outside the designate zone. Because this behavior can damage the grassland on the top of Seoseokdae, which can lead to soil erosion, intensive visitor management may be necessary.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.186-196
• /
• 2010

Introduction: The first aim of this study was to isolate the dental tissue-derived stem cells from the dental follicle (DF), dental pulp (DP), and root apical papilla (RAP) of the extracted wisdom teeth. Second was to evaluate their characterization with the expressions of transcription factors and cell surface markers. Finally, their ability of the in vitro multi-lineage differentiations into osteogenic and adipogenic cells were compared, respectively. Materials and Methods: Dental tissues, including dental follicle, dental pulp, and root apical papilla, were separated in the extracted wisdom teeth. These three dental tissues were cultured in Dulbecco’s modified Eagle’s medium (DMEM) with supplements, respectively. After passage 3, the homogeneous shaped dental tissue-derived cells were analyzed the expression of transcription factors (Oct-4, Nanog and Sox-2) and cell surface markers (CD44, CD90 and CD105) with reverse transcription polymerase chain reaction (RT-PCR) and fluorescence-activated cell sorting (FACS) analysis. In order to evaluate in vitro multi-lineage differentiations, the culture media were changed to the osteogenic and adipogenic induction mediums when the dental tissue-derived cells reached to passage 3. The characteristics of these three dental tissue-derived cells were compared with immunohistochemistry. Results: During primary culture, heterogenous and colony formatted dental tissue-derived cells were observed in the culture plates. After passage 2 or 3, homogenous spindle-like cells were observed in all culture plates. Transcription factors and mesenchymal stem cell markers were positively observed in all three types of dental tissue-derived cells. However, the quantity of expressed transcription factors was most large in RAP-derived cells. In all three types of dental tissue-derived cells, osteogenic and adipogenic differentiations were observed after treatment of specific induction media. In vitro adipogenic differentiation was similar among these three types of cells. In vitro osteogenic differentiation was most strongly and frequently observed in the RAP-derived cells, whereas rarely osteogenic differentiation was observed in the DP-derived cells. Conclusion: These findings suggest that three types of human dental tissue-derived cells from extracted wisdom teeth were multipotent mesenchymal stem cells, have the properties of multi-lineage differentiations. Especially, stem cells from root apical papilla (SCAP) have much advantage in osteogenic differentiation, whereas dental follicle cells (DFCs) have a characteristic of easy adipogenic differentiation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.126-136
• /
• 2017

Gardeners have a desire to not only enjoy a garden but to create the garden themselves and play the role of garden designer. However, they express a great difficulty in gardening activities such as planting and managing plants, the main materials of the garden, due to lack of expertise. Therefore, in order to encourage hobby gardening activities, it is necessary to understand the preferences of the gardeners so that they can easily experience and create a garden, and to provide information on gardening know-how and preferred plants according to places given high preference. This study analyzed the preference for places and plants characteristics according to the purpose of creating a garden. To this end, a questionnaire survey was conducted with visitors to the Korea Landscape and Garden Expo, expected to have been attended primarily by gardening enthusiasts. As a result, gardeners were divided into three groups: appraisal - purposed type, multifunctional type, and participation - purposed type. The group of appraisal purposed type preferred porches and terraces, and private home front yards as well as favored indoor places rather than outdoor places compared with other types. In selecting plants, they prefer plants that can be easily managed in an indoor environment and appreciate natural colors through the colors of flowers and leaves. The multifunctional type group preferred a private home front yard as a garden creation space. Compared with the other types, it showed a high preference for 'unoccupied land in urban housing' and 'community garden' and was analyzed as a group having a high understanding of garden activities. In selecting plants, this group preferred fruit trees or productive plants such as homegrown crops. The participation purposed type group preferred porches and terraces as well as private home front yards as a gardening space. For plants, they preferred plants that are easy to manage. It is meaningful that this study provided preferences for places and plant characteristics according to the creative purpose of the gardener and provided basic data for selecting the place and the plant characteristics of the garden according to the gardener's type.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.149-157
• /
• 2013

The weirs built so far are mainly overflow type weirs overflowing to the upstream. Main advantages of overflow type weirs are, effective water resources management and easy design, construction and maintenance due to many accumulated studies. However, due to the special feature of the overflow type weir where water overflows through the upstream of the weir, the silt coming from the upstream is not discharged to the downstream of the weir. This increases the river bed and reduces the reservoir capacity, and as a result, the weir loses its function. A underflow type weir with a water gate has been implemented in order to solve such sediment deposit and weir maintenance problems. However due to the design problem of recently constructed underflow type weirs, the river bed of the downstream of a weir has been scoured. And this leds to a structural problem. In this study, the flow characteristics of overflow type weirs and underflow type weir, hydraulic jump length analysis depending on change of water depth and the amount of specific energy loss generated per unit length depending on a weir type have been compared and analyzed, for the effective design and management of the weirs. The experiment results show that, when identical upstream conditions of underflow type weir and an overflow type weir were maintained, the hydraulic jump length was up to twice longer with Fr(Froude number) 3.5 of the hydraulic jump length at the underflow type weir, and the hydraulic jump length gradually decreased as the downstream water depth increased. The comparative analysis result of the amount of specific energy loss generated per unit length showed that the amount of energy loss per unit length was twice higher for an overlfow type weir than a underflow type weir. Therefore, in case of a underflow type facility, an additional energy reduction facility is determined to be necessary for safety of water construction structures.

• Journal of Korean Classical Literature and Education
• /
• no.35
• /
• pp.153-193
• /
• 2017

This study explores the creation and enjoyment of Kuwoonmong (九雲夢) using a reference system called the cultural imagination, which is related to the Yin-Yang (陰陽) and Wu Xing (五行). When Kim Manjung wrote Guwoonmong, he may have composed figures and events based on this imagination. In particular, when he designed the eight seonnyeo (팔선녀), he set the order such as Gap (甲), Eul (乙), Byeong (병), Jeong (丁), etc. and characterized them according to the celestial stem (天干). Thus it was easy to avoid overlapping of characters and to construct various stories and relationships between them. The table below shows the characters of Kuwoonmong corresponding to the celestial stem. In not only the individual person but also the narrative world, Kuwoonmon demonstrates Yin-Yang and Wu Xing's imagination. In this respect, Kuwoonmon can be considered a large symbol encompassing the abstract theory of Yin-Yang and Wu Xing. Of course, the writer, Kim, Manjung would not have tried to symbolize the principle intentionally. However, he was also present in the environment of the cultural imagination that has been formed over the years. The same is true for the contemporary recipients of Guwunmong. They would have had a pleasant experience applying the cultural imagination and strengthening their familiar world view and human view.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.291-298
• /
• 2021

Purpose. The purpose of this study is to compare five interdental cleansing products' effectiveness on removing artificial dental plaque on the interdental space of zirconia crowns. Materials and methods. A model with abutments on the right mandibular second premolar and first molar were prepared. 10 zirconia crowns for each abutment were fabricated. After applying artificial dental plaque between the zirconia crowns, a single clinician attempted to remove the plaque with five products: interdental toothbrush, end-tuft toothbrush, dental floss, Easypick, Water pik. They were conducted 10 times per group. The aspect and area of removed surfaces were analyzed using images taken with a digital camera. One factor analysis of variance was performed as a statistical analysis, and a post-hoc test was performed using the Scheffé method (P < .05). Results. There were differences in the area and the pattern according to the characteristics of the products. The largest area, including the marginal portion, was removed in the dental floss group. Interdental toothbrush group was the most effective in removing the dental plaque at the marginal portion. Easypick was less effective than the interdental toothbrush. The end-tuft toothbrush showed better results than other products in cleansing mesiobuccal and distobuccal area, but could not cleanse the area directly below the contact point. In Water pik group, artificial dental plaque was scarcely removed. The removal rate of artificial dental plaque was in the order of floss (69.47%), end-tuft toothbrush (49.36%), interdental toothbrush (44.20%), Easy pick (13.04%), and Water pik (0.59%). Conclusion. Dental floss showed the highest removal rate in the interdental space restored with zirconia crowns, while interdental toothbrush was the most effective in removing the dental plaque at the marginal portion.

• Journal of Korean Theatre Studies Association
• /
• no.49
• /
• pp.5-47
• /
• 2013

Among the styles of performing arts, perhaps the genre that has attracted the largest audience would be musical. Popularity of musical has brought diverse changes in our performing arts market, and, upon emerging another musical genre, called 'Korean Traditional Musical Comedy,' it has been well-received by the audiences. 'Korean Traditional Musical Comedy' is a word that are formed by merging two other terms such as 'Korean Traditional Music' and 'Musical (Comedy).' In the meantime, however, it has yet some problems in order to be defined as the genre that has concrete concepts. It is because the term such as Korean Traditional Musical Comedy was created being closely associated with a marketing purpose rather than a term that defines the characteristics of a genre of performing arts. Although this new musical genre has drawn attentions of many audiences by adding 'Musical Comedy' to 'Korean Traditional Music' that was not quite popular to the public, it still does not have any established forms so that there is a fine line between "Korean Traditional Musical Comedy" and another genre like traditional style folk opera ("Changgeuk"). Looking at the characteristics of the musical work called 'Korean Traditional Musical Comedy, in general, first of all, it is a performance where music and drama are played. Here, the distinctive characteristic of this musical is that 'Korean Traditional Music' is sung. And the kinds of Korean traditional musics being sung are mainly Pansori (dramatic story-singing) and folk-songs, and, in most cases, Korean traditional musical instruments are being used as accompanying music. In this paper, the researcher investigated the aspects of experiment centering around Korean Musical Group, Taroo. These days, various experiments has been repeated not only for the works of Taroo but other musical work presently called 'Korean Traditional Musical Comedy' also. Having encompassed overall performance factors including use of musical instruments, dance, acting, materials for drama as well as music in drama, the researcher has gone through experiments repeatedly. Meanwhile, however, the subject matters that make 'Korean Traditional Musical Comedy' mostly attractive to the audiences are music and songs or sounds. ["Sori" also called "Chang" (唱)] Particularly, under the current situation of our musicals, the role of "Sori" is extremely important. The factor that plays absolutely most important role in acceptance and transformation of "Sori" is the created Pansori. Since the created Pansori is composed with new rhythmic patterns and new narrative poems, it tells the present story. Also it draws good responses from the audiences owing to easy conveyance of dialogues. And, its new style brings diversification to organization of musical instruments, so then this leads to the arrangements of music for Korean traditional music instruments, as well as instrumental music ensemble, orchestra, and jazz band, etc. Likewise, upon appearing creative musics in 'Korean Traditional Musical Comedy,' professional music and vocal compositions have begun to emerge naturally. And, the song specialist and writer, of course, staffs including direction, lighting, and sounds, etc are required. That is, professional composition method are forced to be introduced to all areas. Other than this, there are many music pieces which are based on our unique songs and sounds ("Sori") and such traditional factors as use of lead singer for ceremony or chorus, and the method that puts weight on Pansori. Accordingly many things accomplished. However, it is required that 'Korean Traditional Musical Comedy' go through numerous discussions and more experiments. Above all, the most important things are the role of actor and actress, and their changes, and training of actor and actress further. Good news is there are good audience responses. 'Korean Traditional Musical Comedy' is an open genre. As musicals are divided into several domains according to the characteristics thereof, 'Korean Traditional Musical Comedy' will be able to show its distinctive features in various styles according to embodiment.