• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.259-267
• /
• 2017

Furniture should change according to space. Therefore, it is important that the flexibility of the furniture, the functional efficiency, the economical efficiency and the convenience of the furniture of today. These characteristics are also important for seminar tables that are used temporarily by a large number of people. The seminar furniture currently in use has no shielding plate, there are two forms of table and shielding plate folding table. Therefore, in this research, furniture design and product development that can complement the shortcomings of the seminar furniture currently in use were done. Analysis of problems through overseas investigation and domestic market research, design planning and design, and prototyping. We have sought to optimize the volume by applying the characteristics of RTA furniture to develop a lightweight, lightweight, lightweight, easy to install and easy to use shielding plate, and open and closed system. Basically developed two types of shielding board seminar table basic shape and Roll Screen type, we expanded the scope of application such as each color and pattern. In order to reduce the weight, we replaced the parts such as anchor bolts and hinges and the shielding plate with Roll Screen and pursued volume optimization. As a result of this research, it is expected that the system of mechanisms such as packaging standardization and damage prevention for weight reduction and volume optimization will contribute to building competitiveness by domestic office prefabricated furniture industry's original technology.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.157-164
• /
• 2001

The vehicle electric power system, which consists of two major components: a generator and a battery, which have to provide numerous electrical and electronic systems with enough electrical energy. A detailed understanding of the characteristics of the electric power system, electrical load demands, and the driving environment such as road, season, and vehicle weight is required when the capacities of the generator and the battery are to be determined for a vehicle. An easy-to-use and inexpensive simulation program may be needed to avoid the over/under design problem of the electric power system. A vehicle electric power simulator is developed in this study. The simulator can be utilized to determine the optimal capacities of generators and batteries. To improve the expandability and easy usage of the simulation program, the program is organized in modular structures, and is run on a PC. Empirical electrical models of various generators and batteries, and the structure of the simulation program are presented. For executing the vehicle electric power simulator, data of engine speed profile and electric loads of a vehicle are required, and these data are obtained from real driving conditions. In order to improve the accuracy of the simulator, numerous driving data of a vehicle are logged and analyzed.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1020-1023
• /
• 2009

It had been longer that the design mock-up was made mainly in order to test products. These days, it seems to be main stream that the working mockup is done because designers consider not only the design but also usability. In this study, the modular hardware toolkit, complimentary with Adobe Flash, was developed so that it solves the problem, the electronic hardware which the designers should struggle to make by themselves. This result thing could help the time of the design process to be short and contribute to make robust system rapidly.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.225-232
• /
• 2007

Elementary education is the most fundamental education phase to cultivate a minimum natural quality for basic people life. Because elementary school is a very important step to be a base of lifelong education, it has to lead students to develop a capability of information utilization and rear the ability of self-leading study. Accordingly the elementary school library must be made and managed to cope with a new environment of education and information, as well as it must be a appropriate facilities for the contents of the 7th course of study : The aim of the 7th course of study is to rear the autonomous and creative Korean who lead the age of globalization and information-oriented. It is an ideal that the school library has a separate building for itself as the general information center but it is not easy to do in our conditions. Accordingly when it Is located in a school house, it has to be at the center within easy access of other related rooms such as a classroom and school house. Therefor making a plan and designing a school building, the school library has to be considered preferentially as a main facilities in order to make a school to accept the future.

• Korea-Australia Rheology Journal
• /
• v.11 no.3
• /
• pp.233-240
• /
• 1999

In order to understand the flow behavior of Electrorheological (ER) fluid, dynamic simulation has been intensively performed for the last decade. When the shear flow is applied, it is easy to carry out the simulation with relatively small number of particles because of the periodic boundary condition. For the squeezing flow, however, it is not easy to apply the periodic boundary condition, and the number of particles needs to be increased to simulate the ER system more realistically. For this reason, the simulation of ER fluid under squeezing flow has been mostly performed with some representative chains or with the approximation that severely restricts the flow geometry to reduce the computational load. In this study, Message Passing Interface (MPI), which is one of the most widely-used parallel processing techniques, has been employed in a dynamic simulation of ER fluid under squeezing flow. As the number of particles used in the simulation could be increased significantly, full domain between the electrodes has been covered. The numerical treatment or the approximation used to reduce the computational load has been evaluated for its validity, and was found to be quite effective. As the number of particles is increased, the fluctuation of the normal stress becomes diminished and the prediction in general was found to be qualitatively In good agreement with the experimental results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.959_960
• /
• 2009

Worldwide problem, due to the depletion of energy to power more efficient use of the same capacity to improvise for the use of LED brightness is growing. Recent advances in LED technology have lead to LEDs' widespread use in outdoor-signal applications, such as in traffic and railroad signals. Likewise, for large system design and production of issues leading to the simulation should be performed with less effort than to create a system that is reliable. In this paper a wide field of use to more accurately simulate a LED, and easy to use PSPICE can be used as general-purpose use of the LED device modeling. According to a particular LED, the device easy to use basic input variables to the values of library. In order to determine the behavior of the library to provide basic diode device, compared with PSPICE simulations confirm the accuracy of the simulation was performed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• Journal of the Korean Home Economics Association
• /
• v.31 no.3
• /
• pp.187-197
• /
• 1993

The objectives of this study were to investigate university students' knowledge of traditional dishes and seasonal festive foods, and to estimate the level of consumption in Korea. The result of the study indicated that their level of knowledge of the seasonal festive foods was very low on as average. The reason was that, because each family prepared only one or two festive dishes on seasonal festival days, these students had few opportunity of being acquainted with other kinds of festive foods. In case of traditional foods university students ate some traditional foods. However, they age other kinds of traditional foods such as Jun-Gol and San-Juk less than once a month because of the difficulty in cooking these foods everyday. Finally, the students showed their intention to eat more traditional foods and festive foods if they can find these types of foods easily. The findings of this study suggested that, in order to increase the consumption of our traditional foods, it is necessary to encourage the establishment of many traditional food stores and to provide an easy access to these stores. Furthermore, every effort should be made to develop various kinds of food materials and easy recipes which can be used at home.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.2
• /
• pp.105-114
• /
• 1989

The actual working time of jobs, in general, is different to the standard time of jobs. In this paper, in order to analyze the actual working time of each job in production, we use the total production amount and the encessary total working time. The method which analyzes the actual working time is as follows. In this paper, we propose the interval regression analysis for obtaining an interval linear regression model with constraint conditions with respect to interval parameters. The merits of this method are the following.1) it is easy to obtain an interval linear model by solving a LP problem to which the formulation of proposed regression analysis is reduced, 2) it is easy to add constraint conditions about interval parameters, which are a sort of expert knowledge. As an application, within a case which has given certain data, the actual working time of jobs and the number of workers in a future plan are estimated through the real data obtianed from the operation of processing line in a heavy industry company. It results from the proposed method that the actual working time and the number of workers can be estimated as intervals by the interval regression model.