• 지구물리와물리탐사
• /
• 제17권3호
• /
• pp.137-146
• /
• 2014

원주 KSRS 지진관측망을 이용하여 한반도 및 주변지역의 인공지진원을 식별하기 위한 연구를 수행하였다. 신호대 잡음비가 높은 자연지진 150개와 인공지진 56개를 선별하여 표본 집단을 형성하였다. 2차원 Pg/Lg 스펙트럼 진폭 비의 격자를 구성하여 지진원 식별이 용이한 최적의 주파수 영역으로 Pg(4-6 Hz)/Lg(5-7 Hz)을 도출하였다. 스펙트럼으로 부터 진폭에 대한 지진 규모와 진원 거리의 영향을 보정함으로써 식별 능력을 향상시키고자 하였다. 지진모멘트에 대한 모서리주파수의 역비례 관계로 인한 규모 의존 효과를 보정하기 위하여, Brune의 진원 모델을 가정한 이론 스펙트럼을 관측 스펙트럼에서 제거하였다. 진원 거리에 따른 감쇠효과를 제거하기 위하여, 최적의 감쇠상수를 계산하여 스펙트럼을 보정하였다. 지진파 전파 경로에 대한 보정으로 지역에 따라 스펙트럼 진폭 비가 달라지는 효과를 제거하였다. 자연지진과 인공지진 표본 집단 사이의 식별 정도를 각 보정 단계에서 Mahalanobis 거리 계산을 통하여 비교하였다. 규모와 거리 및 경로 보정 전후 두 표본 집단 사이의 Mahalanobis 거리가 1.98에서 3.01로 증가하여 식별 결과에 뚜렷한 향상이 있었다.

• 대한원격탐사학회지
• /
• 제34권6_3호
• /
• pp.1445-1456
• /
• 2018

본 연구의 목적은 in-track과 cross-track에서 촬영된 KOMPSAT-3 입체영상으로 제작된 매칭 DEM의 품질 및 특성을 비교 분석하는 것이다. 이를 위하여 동일 지역을 촬영한 두 쌍의 KOMPSAT-3영상을 수집하였다. 두 쌍의 입체영상은 B/H, convergence angle 등 스테레오 기하 요소가 거의 유사하다. DEM 제작을 위한 센서모델링은 수 개의 지상기준점를 이용한 RFM affine 보정으로 수행하였다. 연구에 사용된 지상기준점은 NGII에서 제공하는 0.25 m급 항공정사영상과 5 m급 DEM에서 추출하였다. 또한, 참조 DEM과 동일한 해상도로 매칭 DEM을 제작하여 상호간 비교 분석을 실시하였다. 실험 결과, 검사점의 수평 및 수직 오차는 1~3픽셀의 정확도를 나타냈다. 또한, 자연 또는 인공적 지형지물의 영향이 적은 지역에서는 생성된 두 DEM의 형태 및 정확도가 거의 유사하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1438-1445
• /
• 2008

The purpose of this study is to evaluate the fundamental frequency of the dam by the various methods using real microearthquake records which were measured on 'H' dam site and to compare each results. In this study, the fundamental frequency was evaluated by the frequency analysis of the microearthquake records which were measured on the dam crest, by the evaluation of acceleration amplification ratio between the foundation and the crest of dam, and by the evaluation of acceleration response spectrum ratio between the foundation and the crest of dam, respectively. Among these methods, it was found that the method by the evaluation of acceleration response spectrum ratio between the foundation and the crest of dam was the most effective method. But, if the simple engineering judgement can be considered, it was thought that the all three methods could reasonably evaluate the fundamental frequency of the dam.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.186-191
• /
• 1998

The first step in change detection in any SAR monitoring, including SAR interferometry, is the co-registration of the images. CCPs (Ground Control Points) for co-registration are usually detected manually, but for qualitative analyses of enormous volumes of data, some automation of the process will become necessary. An automated determination of common CCPs for the same path/row data is especially desirable. We selected the intersections of linear features as the candidates of common GCPs Very bright point targets, which are commonly used as GCPs, have the drawback of appearing and disappearing depending on the conditions of the observation. But in the case of linear features, some detailed elements may appear differently in some case, but the overall line-likeness will remain. In this study, we selected 18 common GCPs for a single-look JERS-1 SAR image of Omaezaki area in central Japan. Although the GCPs in the first image had to be selected either interactively or semi-automatically, the same GCPs in all other images were successively detected automatically using a tiny sub-image around each GCP and a dilated mask of each linear feature in the first image as the reference data.

• 수완나부미
• /
• 제13권2호
• /
• pp.167-186
• /
• 2021

The Grand Stupa is mentioned in historical text as 'Rajakudakan', which means a royal building with a multitiered superstructure. This Grand Stupa is the principal construction of Wat Chedi Luang, and marks the center of the Chiang Mai City Plan. This study argues that the Grand Stupa was built in 1391 during Phaya Saen Mueang Ma's reign, possibly inspired by the construction of Ku Phaya in Bagan. Thereafter, in 1545, the Grand Stupa's superstructure collapsed after the great earthquake, resulted in the irreparable damage since then. Therefore, a survey using a 3D laser scanner is conducted to collect the most precise data on the current condition of the Grand Stupa, yielding an assumption of its reconstruction. Other simultaneous stupas or those that show a close architectural relationship (e.g. stupas in Wat Chiang Man and Wat Lok Moli and the stupa of King Tilokaraj in Wat Chet Yot in Chiang Mai) are also employed as research frameworks for the reconstruction. As a result, the architectural research on the Grands Stupa, compared with simultaneous stupas, yields a fruitful argument that the pre-collapse superstructure form of the Grand Stupa marks the most architectural similarity to the stupa of Wat Chiang Man.

• 지구물리와물리탐사
• /
• 제15권2호
• /
• pp.57-65
• /
• 2012

탄성파 수치 모형 계산에 있어서 다양한 방법들이 개발되어 적용되었다. 최근에는 특히 탄성파 수치 모형 계산에 있어 혁신적인 방법인 SEM (Spectral Element Method)가 개발되어 사용되어 왔다. 이 방법은 지형을 자유롭게 표현하는데 있어 유연한 유한요소법의 장점에 정확성을 높인 방법이다. 일반적으로 Weak Formulation 형태의 파동방정식에 육면체 요소와 Gauss-Lobatto-Legendre 적분법을 적용한 방법이 널리 사용된다. 일반적인 SEM에서는 PML (Perfectly Matched Layer)경계조건을 적용하기 어려워 속도-응력 변분식으로 파동방정식을 변경하였다. CFS-PML (Complex frequency Shifted PML)경계조건을 ADE (Auxiliary Differential Equation)방정식으로 변경하여 속도-응력 파동방정식에 적용함으로써 분리할 필요가 없는 PML을 적용한 SEM 수치 모형 계산 알고리듬을 구현하였다. 1차원 수치모형과 3차원 수치모형 실험을 통하여 SEM에 적용한 비분리 CFS-PML이 유한경계에서 인공적으로 반사되는 반사파를 효과적으로 제거하는 것을 확인하였다.

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.1015-1039
• /
• 2014

The widening project on Freeway No.1 in Taiwan has a total length of roughly 14 kilometers, and includes three special bridges, namely a 216 m long-span bridge crossing the original freeway, an F-bent double decked bridge in a co-constructed section, and a steel and prestressed concrete composite bridge. This study employed in-situ monitoring in conjunction with numerical modeling to establish a real-time monitoring system for the three bridges. In order to determine the initial static and dynamic behavior of the real bridges, forced vibration experiments, in-situ static load experiments, and dynamic load experiments were first carried out on the newly-constructed bridges before they went into use. Structural models of the bridges were then established using the finite element method, and in-situ vehicle load weight, arrangement, and speed were taken into consideration when performing comparisons employing data obtained from experimental measurements. The results showed consistency between the analytical simulations and experimental data. After determining a bridge's initial state, the proposed in-situ monitoring system, which is employed in conjunction with the established finite element model, can be utilized to assess the safety of a bridge's members, providing useful reference information to bridge management agencies.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.367-377
• /
• 2020

Incremental dynamic analysis (IDA) widely uses for the collapse risk assessment procedures of buildings. In this study, an IDA-based collapse risk assessment methodology is proposed, which employs a novel approach for detecting the near-collapse (NC) limit state. The proposed approach uses the modal pushover analysis results to calculate the maximum inter-story drift ratio of the structure. This value, which is used as the upper-bound limit in the IDA process, depends on the structural characteristics and global seismic responses of the structure. In this paper, steel midrise intermediate moment resisting frames (IMRFs) have selected as case studies, and their collapse risk parameters are evaluated by the suggested methodology. The composite action of a concrete floor slab and steel beams, and the interaction between the infill walls and the frames could change the collapse mechanism of the structure. In this study, the influences of the metal deck floor and autoclaved aerated concrete (AAC) masonry infill walls with uniform distribution are investigated on the seismic collapse risk of the IMRFs using the proposed methodology. The results demonstrate that the suggested modified IDA method can accurately discover the near-collapse limit state. Also, this method leads to much fewer steps and lower calculation costs rather than the current IDA method. Moreover, the results show that the concrete slab and the AAC infill walls can change the collapse parameters of the structure and should be considered in the analytical modeling and the collapse assessment process of the steel mid-rise intermediate moment resisting frames.

• 지구물리와물리탐사
• /
• 제12권2호
• /
• pp.183-191
• /
• 2009

탄성파 수치 모형 계산에 있어서 널리 사용되는 엇갈린 격자 방법이 아니라 회전된 엇갈린 격자 방법을 사용하여 탄성파 수치 모사를 수행하였다. 표준 엇갈린 격자 방법에서는 특별한 자유 경계조건을 적용하여야 하는 단점이 있지만 회전된 격자 방법에서는 물성으로 진공 또는 공기층을 부여함으로써 자유 경계조건을 실현가능하다는 것을 확인할 수 있었다. 파동전파에 있어서 유한 경계 조건에서 발생하는 인공 반사파를 제거하기 위해 PML (Perfectly Matched Layer)의 파동식 분해라는 단점을 극복할 수 있고 좋은 성능을 보이는 CPML (Convolutional Perfectly Matched Layer)법을 회전된 엇갈린 격자법(RSG: Rotatged Staggered Grid)에 적용하였다. 회전된 격자 유한 차분법에서 CPML의 고주파수 흡수 특성과 에너지 흡수율 조사, Cerjan법의 감쇠를 비교한 결과 흡수경계조건으로 좋은 성능을 확인하였다. 유체와 고체의 모형에 대한 경계에 대하여서도 매우 효과적으로 경계면에서 발생하는 반사파를 제거할 수 있음을 알 수 있었다.

• 한국지진공학회논문집
• /
• 제19권1호
• /
• pp.29-36
• /
• 2015

Base isolation is considered as a seismic protective system in the design of next generation Nuclear Power Plants (NPPs). If seismic isolation devices are installed in nuclear power plants then the safety under a seismic load of the power plant may be improved. However, with respect to some equipment, seismic risk may increase because displacement may become greater than before the installation of a seismic isolation device. Therefore, it is estimated to be necessary to select equipment in which the seismic risk increases due to an increase in the displacement by the installation of a seismic isolation device, and to perform research on the seismic performance of each piece of equipment. In this study, modified NRC-BNL benchmark models were used for seismic analysis. The numerical models include representations of isolation devices. In order to validate the numerical piping system model and to define the failure mode, a quasi-static loading test was conducted on the piping components before the analysis procedures. The fragility analysis was performed by using the results of the inelastic seismic response analysis. Inelastic seismic response analysis was carried out by using the shell finite element model of a piping system considering internal pressure. The implicit method was used for the direct integration time history analysis. In addition, the collapse load point was used for the failure mode for the fragility analysis.