• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.135-145
• /
• 2019

Analysis of a long cycle or a trend of time series data based on a long-term observation would require comparability between data observed in the past and the present. In the present study, we proposed an approach to ensure the compatibility among the instruments used for the long-term observation, which would allow to secure continuity of the data. An open-path gas analyzer (Model LI-7500, LI-COR, Inc., USA) has been used for eddy covariance flux measurement in the Gwangneung deciduous forest for more than 10 years. The open-path gas analyzer was replaced by an enclosed-path gas analyzer (Model EC155, Campbell Scientific, Inc., USA) in July 2015. Before completely replacing the gas analyzer, the carbon dioxide ($CO_2$) and latent heat fluxes were collected using both gas analyzers simultaneously during a five-month period from August to December in 2015. It was found that the $CO_2$ fluxes were not significantly different between the gas analyzers under the condition that the daily mean temperature was higher than $0^{\circ}C$. However, the $CO_2$ flux measured by the open-path gas analyzer was negatively biased (from positive sign, i.e., carbon source, to 0 or negative sign, i.e., carbon neutral or sink) due to the instrument surface heating under the condition that the daily mean temperature was lower than $0^{\circ}C$. Despite applying the frequency response correction associated with tube attenuation of water vapor, the latent heat flux measured by the enclosed-path gas analyzer was on average 9% smaller than that measured by the open-path gas analyzer, which resulted in >20% difference of the sums over the study period. These results indicated that application of the additional air density correction would be needed due to the instrument heat and analysis of the long-term observational flux data would be facilitated by understanding the underestimation tendency of latent heat flux measurements by an enclosed-path gas analyzer.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.13-28
• /
• 2019

This study analyzed precipitation environment, heavy metal contamination, and mineral composition of white, reddish brown and mixed precipitates occurring at the Osip stream drainage, Gangwondo. Furthermore, spectral characteristics of the precipitates associated with heavy metal contamination and mineral composition was investigated based on spectroscopic analysis. The pH range of the precipitates was 4.43-6.91 for white precipitates, 7.74-7.94 for reddish brown precipitates, and 7.59-7.9 for the mixed precipitates, respectively. XRF analysis revealed that these precipitates were contaminated with Ni, Cu, Zn, and As. The white precipitates showed high Al concentration compared to reddish brown precipitates as much as 3.3 times, and the reddish brown precipitates showed high Fe concentration compared to white precipitates as much as 15 times. XRD analysis identified that the mineral composition of the white participates was aluminocoquimbite, gibbsite, quartz, saponite, and illite, and that of reddish brown precipitates was aluminum isopropoxide, kaolinite, goethite, dolomite, pyrophyllite, magnetite, quartz, calcite, pyrope. The mineral composition of the mixed precipitates was quartz, albite, and calcite. The spectral characteristics of the precipitates was manifested by gibbsite, saponite, illite for white precipitates, goethite, kaolinite, pyrophyllite for reddish brown precipitates, and albite for the mixed precipitates, respectively. The spectral reflectance of the precipitates decreased with increase in heavy metal contamination, and absorption depth of the precipitates indicated that the heavy metal ions were adsorbed to saponite and illite for white precipitates, and goethite and magnetite for reddish brown precipitates.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.177-186
• /
• 2021

For disaster management and mitigation of earthquakes in Korea Peninsula, active fault investigation has been conducted for the past 5 years. In particular, investigation of sediment-covered active faults integrates geomorphological analysis on airborne LiDAR data, surface geological survey, and geophysical exploration, and unearths subsurface active faults by trench survey. However, the fault traces revealed by trench surveys are only available for investigation during a limited time and restored to the previous condition. Thus, the geological data describing the fault trench sites remain as the qualitative data in terms of research articles and reports. To extend the limitations due to temporal nature of geological studies, we utilized a terrestrial LiDAR to produce 3D point clouds for the fault trench sites and restored them in a digital space. The terrestrial LiDAR scanning was conducted at two trench sites located near the Yangsan Fault and acquired amplitude and reflectance from the surveyed area as well as color information by combining photogrammetry with the LiDAR system. The scanned data were merged to form the 3D point clouds having the average geometric error of 0.003 m, which exhibited the sufficient accuracy to restore the details of the surveyed trench sites. However, we found more post-processing on the scanned data would be necessary because the amplitudes and reflectances of the point clouds varied depending on the scan positions and the colors of the trench surfaces were captured differently depending on the light exposures available at the time. Such point clouds are pretty large in size and visualized through a limited set of softwares, which limits data sharing among researchers. As an alternative, we suggested Potree, an open-source web-based platform, to visualize the point clouds of the trench sites. In this study, as a result, we identified that terrestrial LiDAR data can be practical to increase reproducibility of geological field studies and easily accessible by researchers and students in Earth Sciences.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.265-282
• /
• 2022

Sea surface temperature (SST) is a factor that greatly influences ocean circulation and ecosystems in the Earth system. As global warming causes changes in the SST near the Korean Peninsula, abnormal water temperature phenomena (high water temperature, low water temperature) occurs, causing continuous damage to the marine ecosystem and the fishery industry. Therefore, this study proposes a methodology to predict the SST near the Korean Peninsula and prevent damage by predicting abnormal water temperature phenomena. The study area was set near the Korean Peninsula, and ERA5 data from the European Center for Medium-Range Weather Forecasts (ECMWF) was used to utilize SST data at the same time period. As a research method, Long Short-Term Memory (LSTM) algorithm specialized for time series data prediction among deep learning models was used in consideration of the time series characteristics of SST data. The prediction model predicts the SST near the Korean Peninsula after 1- to 7-days and predicts the high water temperature or low water temperature phenomenon. To evaluate the accuracy of SST prediction, Coefficient of determination (R²), Root Mean Squared Error (RMSE), and Mean Absolute Percentage Error (MAPE) indicators were used. The summer (JAS) 1-day prediction result of the prediction model, R²=0.996, RMSE=0.119℃, MAPE=0.352% and the winter (JFM) 1-day prediction result is R²=0.999, RMSE=0.063℃, MAPE=0.646%. Using the predicted SST, the accuracy of abnormal sea surface temperature prediction was evaluated with an F1 Score (F1 Score=0.98 for high water temperature prediction in summer (2021/08/05), F1 Score=1.0 for low water temperature prediction in winter (2021/02/19)). As the prediction period increased, the prediction model showed a tendency to underestimate the SST, which also reduced the accuracy of the abnormal water temperature prediction. Therefore, it is judged that it is necessary to analyze the cause of underestimation of the predictive model in the future and study to improve the prediction accuracy.

• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.179-188
• /
• 2022

Global warming causes climate change and increases extreme weather events worldwide, and the occurrence of heatwaves and droughts is also increasing in Korea. For the monitoring of extreme weather, various satellite data such as LST (Land Surface Temperature), TCI (Temperature Condition Index), NDVI (Normalized Difference Vegetation Index), VCI (Vegetation Condition Index), and VHI (Vegetation Health Index) have been used. VHI, the combination of TCI and VCI, represents the vegetation stress affected by meteorological factors like precipitation and temperature and is frequently used to assess droughts under climate change. TCI and VCI require historical reference values for the LST and NDVI for each date and location. So, it is complicated to produce the VHI from the recent satellite GK2A (Geostationary Korea Multi-Purpose Satellite-2A). This study examined the retrieval of VHI using GK2A AMI (Advanced Meteorological Imager) by referencing the historical data from VIIRS (Visible Infrared Imaging Radiometer Suite) NDVI and LST as a proxy data. We found a close relationship between GK2A and VIIRS data needed for the retrieval of VHI. We produced the TCI, VCI, and VHI for GK2A during 2020-2021 at intervals of 8 days and carried out the interpretations of recent extreme weather events in Korea. GK2A VHI could express the changes in vegetation stress in 2020 due to various extreme weather events such as heatwaves (in March and June) and low temperatures (in April and July), and heavy rainfall (in August), while NOAA (National Oceanic and Atmospheric Administration) VHI could not well represent such characteristics. The GK2A VHI presented in this study can be utilized to monitor the vegetation stress due to heatwaves and droughts if the historical reference values of LST and NDVI can be adjusted in a more statistically significant way in the future work.

• Journal of The Korean Association For Science Education
• /
• v.42 no.4
• /
• pp.397-415
• /
• 2022

As the global warming problem becomes serious, the need for carbon cycle education in school is increasing. Adopting systems thinking ability is needed to understand the carbon cycle systematically. Furthermore, under the rapid change of environment, society, and economy, systems thinking ability is being emphasized as it can strengthen the competencies of students who will be leading the future society. The purposes of this study are as follows: first, is developing the systems thinking instrument for the carbon cycle and the rubric for analysis of systems thinking instrument. The second is analyzing the systems thinking ability of students using the developed instrument and rubric. In order to perform this study, previous studies related to the carbon cycle and systems thinking education were analyzed. Based on the analysis results, the systems thinking instrument for the carbon cycle and rubric were developed. The systems thinking ability was analyzed by implementing the developed instrument and rubric to 172 high school and university students. The results of this study are as follows: first, the systems thinking instrument for the carbon cycle was developed, and a rubric utilization guide was constructed. The instrument and rubric were modified through pilot study for middle school students producing expert opinion in relation to systems thinking and carbon cycle. Second, the systems thinking ability of students was analyzed. Consequently, students had systems thinking ability fully at a low level, such as identifying the variables related to the carbon cycle. However, it was shown that they lacked the systems thinking ability at a high level, such as time delay and feedback processes. The importance of the carbon cycle has been increasing since the global warming is the most pressing issue and significant environmental problem facing us today. Application of the systems thinking ability can contribute to understanding these complex problems and finding fundamental solutions.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.367-376
• /
• 2022

This study is a preliminary step to understand the reaction between various liquids and zeolite in the subduction zone environment. Stilbite, NaCa₄(Al₉Si₂₇)O₇₂·28(H₂O), was selected and high pressure study was conducted on compressional behavior by the pressure-transmitting medium (PTM). Water and NaHCO₃ solution that can exist in the subduction zone was used as PTM, and samples were pressurized from ambient to a maximum of 2.5 GPa. Below 1.0 GPa, both experiments show a low linear compressibility in the range of 0.001 to 0.004 GPa^-1 and a high bulk modulus of 220(1) GPa. This is presumably because the structure of the stilbite becomes very dense due to insertion of water molecules or cations into the channel. On the other hand, at 1.0 GPa or higher, the trends of the two experiments are different. In the water run, the linear compressibility of the c-axis is increased to 0.006(1) GPa^-1. In the NaHCO₃ run, the linear compressibility of the b- and c-axis is increased to 0.006(1) GPa^-1. The bulk modulus after 1.0 GPa shows values of 40(1) and 52(7) GPa in water and NaHCO₃ run, respectively, confirming that stilbite becomes more compressible than that before 1.0 GPa. It is caused by the migration of cations and water molecules inside the channel, as the water molecules in the PTM start to freeze and stop to insert toward the channel at 1.0 GPa or more. In the NaHCO₃ run, it is assumed that the distribution of extra-framework species inside the structure is changed by substitution of the Na⁺ cation. It can be expected from tendency of the relative intensity ratio of the (001) and (020) peaks which show a different from that of the water run.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.576-585
• /
• 1991

General procedures of seed preparation as conventional guide had been established in China before most of Korean literature documented them. ‘Chwijongbeob’ (method of seed select) was to select good quality of seeds and to discard the rest. In ‘Seonjongbeob’ (method of seed grading) although China employed only ‘Sooseonbeob’ (method of seed select with water), but seeds were selected in order of selection of seeds by winds, selection of seeds by sieve and selection of seed with water in Korea. As compared with the recent techniques, those methods were perfect techniques for selection of good quality seeds of rice, except for method of seed selection by salt water was developed. The method for measurement of seed moisture, and for measurement of melted snow, spoiled urine and extracted juice by boiling water with the bone of livestock were originated from ancient China. The farming books in Korea were more or less followed the above methods. However, these techniques were complicated and impractical interms of validity and rationality. Also, it is judged that these tchniques are more appropriate in dry areas and alkaline soil of China rather than in Korean conditions. The plowing is a work to begin farming, and is operated for air ventilation between atmosphere and earth. Also, this techniques was adopted in the farming books from the early to the late Chosun dynasty without changes. Fields were deep-plowed in the first, in fall (or in spring) and for cultivation, and were shallow -plowed in the second, in spring (or in summer) and in intertillage. The former was for water reserve and land preparation, and the later was for weed control with intertillage. However, plowing in fall which was different from fallowing in dry areas, was recommended in Korea (Jikseol). but was not practiced in Sejongsilrok. This was changed with time, and plowing for cultivation in Korea was interrelated with use of green manure crops, method of plowing of upseting plough, method of manure practice and sometimes dry plowing. In addition, until the 15th century method of using a kind of plowing-tool made of log as farm tools was created to support reclamation for enlargement of farm land in mountaineous and coastal areas. For desolate farm lands by many internal and external disturbances, one tried to recover yield ability by increasing labor productivity from the 17th or 18th century. To do this, ‘Banjongbeob’ (culture method by upset plowing weed control) and ‘Hwanubeob’(culture method by firing weed control) which were cultural methods of ancient China were readapoted but the results were not clearly informed. Also, the reality of those was reexamined in the end of the Chosun dynasty.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.118-143
• /
• 2023

Space is becoming more commercialized. Despite of its delayed start-up, space activities in Korea are attracting more nation-wide supports from both investors and government. May 25, 2023, KSLV II, also called Nuri, successfully transported, and inserted seven satellites to a sun-synchronous orbit of 550 km altitude. However, Starlink has over 4,000 satellites around this altitude for its commercial activities. Hence, it is necessary for us to constantly monitor the collision risks of these satellites against resident space objects including Starlink. Here we report a quantitative research output regarding the conjunctions, particularly between the Nuri satellites and Starlink. Our calculation shows that, on average, three times everyday, the Nuri satellites encounter Starlink within 1 km distance with the probability of collision higher than 1.0E-5. A comparative study with KOMPSAT-5, also called Arirang-5, shows that its distance of closest approach distribution significantly differs from those of Nuri satellites. We also report a quantitative analysis of collision-avoiding maneuver cost of Starlink satellites and a strategy for Korea, being a delayed starter, to speed up to position itself in the space leading countries. We used the AstroOne program for analyses and compared its output with that of Socrates Plus of Celestrak. The two line element data was used for computation.