• 제목/요약/키워드: Earth resistivity

검색결과 469건 처리시간 0.02초

전기비저항탐사에서 음의 겉보기 비저항 (Negative Apparent Resistivity in Resistivity Method)

  • 조인기;김정호;정승환;서정희
    • 지구물리와물리탐사
    • /
    • 제5권3호
    • /
    • pp.199-205
    • /
    • 2002
  • 전기비저항 탐사에서 측정되는 양은 두 전위전극 사이의 전위차이다. 이 전위차가 양일 경우에는 겉보기 비저항도 양의 값을 가지며, 음일 경우에는 겉보기 비저항도 음의 값을 나타낸다. 또한 측정되는 전위차의 부호는 전기장의 방향에 따라 좌우된다. 만약 측정방향과 전기장의 방향이 같다면, 전위차와 겉보기 비저항은 양의 값을 보이게 되며, 그 반대의 경우에는 음의 값을 나타낸다. 일반적으로 지표 전기비저항 탐사에는 측정방향과 1차 전기장의 방향이 같은 전극 배열을 사용하며, 이 방향의 1차 전기장은 2차 전기장에 비하여 항상 크다. 따라서 일반적인 전극배열을 사용하는 지표 전기비저항 탐사의 경우에는 지형이 평탄하고 잡음이 없다면 음의 겉보기 비저항은 나타나지 않는다. 그러나 시추공-시추공 전기비저항 탐사의 경우에는 1차 전기장의 방향과 측정방향이 일치하지 않으며, 경우에 따라서는 1차 전기장의 측정방향 성분이 2차 전기장의 측정방향 성분 보다 그 크기가 작을 수 있다. 이 경우 2차 전기장의 방향과 측정방향이 서로 반대일 경우에는 음의 겉보기 비저항이 나타날 수 있다. 따라서 음의 겉보기 비저항은 측정방향의 1차 전기장이 매우 작은 영역에서 발생할 가능성이 높다.

저수지 안전진단을 위한 3차원 전기비저항 탐사 (3D Resistivity Survey for Dam Safety Inspection)

  • 조인기;용환호
    • 지구물리와물리탐사
    • /
    • 제22권3호
    • /
    • pp.99-106
    • /
    • 2019
  • 전기비저항 탐사법은 저수지 누수 구간의 탐지를 위한 효과적인 물리탐사법으로 저수지 안전진단을 위해 널리 사용되어 왔다. 저수지에서 수행되는 대부분의 전기비저항 탐사는 현장자료획득의 편의성을 고려하여 제체에 평행한 측선에 대한 2차원 탐사가 주로 적용되고 있다. 그러나 저수지는 3차원 구조를 갖기 때문에 2차원 가정에 위배되며, 2차원 해석 결과는 3차원 효과에 의한 왜곡을 피할 수 없다. 또한 2차원 탐사는 전기비저항의 2차원 단면만을 제공하므로 저수지의 3차원 구조에 대한 해석이 어려우며, 3차원적 누수 경로의 파악이 불가능하다. 이 연구에서는 저수지에서 3차원 전기비저항 탐사를 실시하고, 그 해석 결과를 2차원 탐사와 비교 분석하여 2차원 탐사의 한계 및 3차원 탐사의 장점을 제시하였다. 3차원 탐사는 2차원 탐사에 비하여 보다 정밀하게 저수지 상태 및 누수 경로에 대한 3차원적 정보를 제공해 주는 것으로 확인되었다. 따라서 3차원 탐사는 보다 정확한 저수지 안전진단을 위하여 적극 확대되어야 할 것으로 판단된다.

인공송신원 가청주파수 자기지전류 탐사를 이용한 제주 동남부의 전기비저항 구조 및 지하수 분포 조사 (Geoelectrical Structure and Groundwater Distribution in the South-eastern Region of Jeju Island Revealed by Controlled Source Audio-frequency Magneto Telluric (CSAMT) survey)

  • 양준모;권병두;이희순;송성호;박계순;이규상
    • 자원환경지질
    • /
    • 제40권1호
    • /
    • pp.67-85
    • /
    • 2007
  • 제주도 동남부의 전기비저항 구조 및 지하수 분포 형태를 조사하기 위해 제주도 중산간에서 남동방향으로 해안 지역을 횡단하는 두 측선에 대해 인공송신원 자기지전류탐사를 수행하였다. 측점들이 위치한 지질학적 상황을 고려하여 세 종류의 일차원 역산 기법을 도입하였고, 해석의 신뢰성 향상을 위해 각 역산 결과를 비교, 분석하였다. 이 과정으로부터 도출된 제주 동남부의 개략적인 전기비저항 구조는 고비저항-저비저항-보다 저비저항을 갖는 3층 구조였다. 역산 결과와 측점 부근의 심부 시추 자료의 비교를 통해 제주도 동남부의 각 층별 암상이 개략적으로 추정되었다: 지질학적 층서의 관점에서 제 1층과 2층은 두께 100-250m의 현무암층에, 제 3층은 서귀포층 및 U층에 대응하는데, 서귀포층의 두께는 조사심도가 충분히 깊지 않고 서귀포층과 U층의 전기비저항 차이가 작기 때문에 추정할 수 없었다. 그러나 주대수층과 밀접하게 관련 있는 서귀포층은 제주도 동남부 지역의 경우 중산간 지역부터 해안 지역까지 뚜렷한 공간적 연속성을 보여주었다.

MT 자료를 이용한 한반도의 심부 1차원 전기비저항 구조 연구 (1-D Deep Resistivity Structure of the Korean Peninsula Using Magnetotelluric(MT) Data)

  • 양준모;이희순;이춘기;권병두
    • 한국지구과학회지
    • /
    • 제30권2호
    • /
    • pp.153-164
    • /
    • 2009
  • 경상분지와 경기육괴 지역에서 획득된 총 7측점의 MT 자료를 이용하여 한반도의 광역적인 1차원 심부 전기비저항 구조를 조사하였다. 경상분지에 위치한 측점들은 주변 해양에 의한 왜곡을 보정하기 위해 반복적 텐서 벗겨내기 기법을 이용하여 해양효과를 보정하였다. 총 7측점에 대한 층서 구조 일차원 역산 결과는 천부지층, 상부지각, 하부 지각 및 상부 맨틀, 연약권으로 구분되는 4층 전기비저항 모델을 제시하였다. 이 중 상부지각과 하부 지각의 경계, 즉 콘라드면은 전 측점에서 뚜렷하게 나타났다. 경상분지 지역은 깊이 약 17km, 경기육괴 지역은 약 12km부근에 콘라드면이 존재하였다. 또한 경상분지 지역 상부지각의 전기비저항은 경기육괴에 비해 5배정도 높았다. 마지막으로 연약권은 깊이 약 100km 이하에 존재하며, 200-300 ohm-m의 전기비저항을 갖는 것으로 추정되었다.

심부 석탄층 탐사에 있어서 CSAMT 탐사법 적용 (The Application of CSAMT to Deep-seated Coal Seams Exploration)

  • 정승환;김정호;전정수
    • 자원환경지질
    • /
    • 제23권1호
    • /
    • pp.73-79
    • /
    • 1990
  • Controlled source audio-frequency magnetotelluric (CSAMT) has the great advantage of efficient mapping resistivity distribution and relatively deep depth of investigation. Moreover, CSAMT may be regarded more attractive than audio-frequency magnetotelluric in the sense of the strong and controllable signal. However, it has the problem such as undershoot and/or near-field effect that is hard to be interpreted if the interpretation method of MT is directly applied. The problem arises from the existance of controlled source which makes CSAMT attractive. So the characteristics of CSAMT response should be thoroughly understood prior to interpretation stage. In this study, numerical modeling program for horizontally layered earth was developped for the interpretation of CSAMT field data. CSAMT field survey was run as a follow-up to resistivity dipole-dipole study over the same survey line at Bongmyung coal mine. The survey used a grounded dipole source 2 Km in length and located 7.5Km south in this study. A good agreement between field CSAMT data and calculated data was demonstrated even in geologically complex earth situations.

  • PDF

Evaluation of three-dimensional cole-cole parameters from spectral IP data

  • Yang Jeong-Seok;Kim Hee Joon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.383-389
    • /
    • 2003
  • Clay minerals show a distinct induced-polarization phenomenon, which is one of the most important factors for predicting groundwater flow and contaminant transport. This paper presents a step-by-step process to estimate Cole-Cole parameters from spectral induced-polarization (IP) data measured on the surface of three-dimensional earth. First, the inversion of low-frequency resistivity survey data is made to identify the dc resistivity ${\rho}_dc$ of a volume having IP effects. The other parameters, chargeability m, time constant $\tau$, and frequency dependence c, are sought for the polarizable volume. Next, using multi-frequency data, c can be obtained as high or low asymptotes of the slope of log phase vs. log frequency. Further, for low m, intrinsic $\tau$ is approximated by apparent one, ${\tau}_a$, which is derived from the relation ${{\omega}{\tau}}_a$=1 at an angular frequency $\omega$, where the imaginary component of spectral IP data has an extreme value. Finally, to obtain intrinsic m a two-step linearized procedure has been derived. For a body of given $\tau$ and c, forward modeling with a progression of m values yields a plot of observed vs. intrinsic imaginary components for a frequency. Since this plot is essentially linear, to extract the intrinsic imaginary component is quite simple with an observed value. Using the plot of intrinsic imaginary component vs. m, intrinsic m is determined. We present a synthetic example to illustrate that the Cole-Cole parameters can be recovered from spectral IP data.

  • PDF

제체형태와 수위에 따른 전기비저항 반응 연구 (Electrical Resistivity Response Due to the Variation of Embankment Shape and Reservoir Level)

  • 오석훈
    • 지구물리와물리탐사
    • /
    • 제11권3호
    • /
    • pp.214-220
    • /
    • 2008
  • 점토질의 중심코어부에 차수 역할을 의존하는 형식의 제체에 대한 안정성 검토에 자주 적용되는 B차원 전기비저항 탐사자료의 해석 시, 제체의 심벽 구조와 수위에 따른 왜곡 양상을 모델링을 통해 검증하였다. 3차원 구조인 제체의 해석을 주로 2차원으로 수행하는 과정에서 다양한 왜곡효과가 나타났다. 제체의 재료가 수평적으로 균질한 상태에서 수위와 연관지어 분석한 결과, 양안부보다는 제체 중앙부가 비저항 단면에서 수위선을 비교적 정확히 나타내며, 양안에 존재하는 지반 등 3차원 효과로 인해 양안부로 다가가면 수위선이 깊어지는 반응을 보였다. 또한 제체의 가장 외부구조인 채움재부의 경사가 일정할 때, 코어부의 경사가 급할수록 실제 수위와 비슷한 효과를 보였다. 코어부의 경사가 비슷할 때는, 외부 채움재부의 경사가 완만할수록 실제 수위와 비슷한 효과를 보였으며, 양안에서의 3차원 효과도 덜 나타났다. 채움재부의 경사가 급하면 2차원 역산 결과, 실제수위보다 더 깊은 위치에서 수위와 관련된 저비저항대를 지시하였으며, 양안에서의 3차원 효과가 크게 나타났다.

풍화사면에서의 추정파쇄대 평가를 위한 2차원 전기비저항 구조도 적용 기법 (Application Techniques of 2D-Resistivity Structure for Estimation of Inferred Fracture Zone in Weathered Slope)

  • 김재홍;박철숙;이현재;정교철
    • 지질공학
    • /
    • 제19권3호
    • /
    • pp.323-330
    • /
    • 2009
  • 전기비저항 탐사는 최근 토목설계 및 환경분야에 있어서 단층 및 파쇄대의 탐지 등에 활발히 적용되고 있다. 국내에서는 지금까지 시공실적이 없는 직경 15 m 3열의 터널 굴착공사를 시행하는 도중 터널 유입부 지반이 당초 설계와 달리 기반암선이 낮게 형성되었고, 풍화된 사면에 핵석과 파쇄대가 존재하는 것으로 나타났다. 터널 유입부 지반의 분포양상을 정확히 파악하고자 전기비저항 쌍극자탐사를 시행하였다. 전기비저항 탐사는 암석의 종류, 공극, 온도 및 지질적 순환과정 등을 통하여 외견비저항 값이 많은 변화를 보인다. 역산해석 후 전기비저항치에 의한 지반특성을 파악하였고 유한차분법을 활용한 2차원 전기비저항 구조도를 적용하여 파쇄대를 추정하였다.

Application of integrated geophysical methods to investigate the cause of ground subsidence of the highly civilized area

  • Kim Jung-Ho;Yi Myeong-Jong;Hwang Se-Ho;Song Yoonho;Cho Seong-Jun;Lee Seong-Kon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.410-415
    • /
    • 2003
  • Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

  • PDF