• 제목/요약/키워드: Earth Retaining

검색결과 458건 처리시간 0.024초

도심지터널에 유입된 지하수량 및 침전물의 성분분석 연구 (A study on analysis of influx path and ingredient of sedimentation substance and groundwater influx quantity in downtown tunnel)

  • 우종태
    • 한국터널지하공간학회 논문집
    • /
    • 제7권3호
    • /
    • pp.219-226
    • /
    • 2005
  • 서울지하철5호선에 설치된 60여개 집수정의 지하수 유입량을 6년간 조사 분석한 결과 터널연장 1km당 유입량은 분당 $0.77m^3$으로 집수정 설계기준인 박스구조물은 $2m^3$, 터널구조물은 $3m^3$와 비교 했을때 상당한 여유가 있는 것으로 분석되었다 붉은색 침전물은 첨성분이 가장 많이 포함되어 있었는데 이는 흙막이 공법과 지역 특성상 철분을 많이 포함하고 있는 지하수에 원인이 있는 것으로 판단되었다. 백색 침전물의 경우 가장 많이 발견된 성분은 산화칼슘으로 건설당시 지반보강을 위하여 시행한 그라우팅 주업재인 시멘트가 지하수와 함께 터널 내부로 유입된 침전물로서 터널의 안전성에는 영향이 없을 것으로 판단된다.

  • PDF

다중정착 지반앵커의 하중전달 특성에 관한 연구 (A study on the characteristics of multi load transfer ground anchor system)

  • 김지호;정현식;권오엽;신종호
    • 한국터널지하공간학회 논문집
    • /
    • 제16권1호
    • /
    • pp.25-50
    • /
    • 2014
  • 본 연구에서는 앵커의 대표적 유형인 인장형 앵커와 압축형 앵커, 최근 개발되어 널리 사용되고 있는 다중정착 지반앵커의 지반 내 거동을 비교, 분석하여 그 적용 특성을 평가하였다. 이를 위하여 대형모형실험과 현장시험을 통하여 앵커 유형별 하중-전단응력 관계를 확인하였으며 이를 수치해석 결과와 비교, 분석하였다. 검토결과 앵커 유형에 따른 하중과 지반강도, 전단응력의 관계를 규명할 수 있었으며, MLT 앵커는 인장형 앵커에 비해 1.3배, 압축형 앵커에 비해 1.5배의 인발저항 효과가 있는 것을 확인할 수 있었다. 본 연구결과를 다양한 지반조건에서 확장하여 적용할 경우 지반조건에 따른 앵커 유형별로 적용이 가능한 최대 인발 저항력을 제안할 수 있을 것으로 판단되며, 이는 지반앵커의 설계 및 시공에서 매우 유용하게 이용될 수 있을 것이다.

유한요소 해석을 통한 형상 및 크기에 따른 가물막이 특성 검토 (The Structural Characteristics of the Temporary Cofferdam in Accordance with the Shape and Size Obtained from Numerical Analysis)

  • 김현주;최진오;권윤호
    • 한국지반공학회논문집
    • /
    • 제36권1호
    • /
    • pp.29-38
    • /
    • 2020
  • 최근 환기구, 비상탈출용 수직구, 취수탑 가시설 등 지중 가물막이 또는 차수벽체로 원형 가물막이가 많이 적용되고 있다. 원형단면의 경우 벽체에 작용하는 토압이 원형가물막이 형상에 따라 아칭효과(arching effect)로 인하여 작용토압에 대한 구조체의 부재력이 감소하는 것으로 알려져 있다. 본 연구에서는 원형 가물막이에 대한 2D 유한요소해석(FEM)을 활용하여 원형띠장(ring beam) 강성을 산출 후 탄소성해석에 적용하여 부재의 단면력을 검토하였다. 더불어 3D 유한요소해석(FEM)을 통하여 원형단면의 가물막이가 다각형 형태의 가물막이보다 전단력, 휨모멘트, 그리고 발생변위가 최소값을 갖는 것으로 나타났으며, 이로써 원형단면 가물막이가 구조적으로 보다 효율적인 단면 형태임을 확인하였다

시험도로 건설과 계측시스템 구축 (A Review of Instrumentation System and Construction of Korea Highway Test Road)

  • 최준성;김도형;김성환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.603-606
    • /
    • 2000
  • The cost needed for the construction and management of highways in the whole nation is rapidly growing so the research that can decrease the cost is required. However, most of the highway specs have simply converted from those of other countries, including USA. Therefore, some of our design and construction specs were not the optimum ones based on our own situation, requiring a research under the actual traffic and environment of our nation. The use of test road develops many aspects of highway engineering. Those are evaluation of construction materials, a general overview of korea pavement design and serviceability under the actual traffic and environmental condition of the nation. It is also economical and efficient compared to the trial construction of each item in spreaded form. A test road, 7.7km long with two lanes, is being constructed on the Inner Central Expressway. In this test road, 2.7km is planned for asphalt pavement and 3.4km is planned for concrete pavement. Three test bridges and five earth retaining structures will be included in the test road. Based on the master plan, the major performance was progressing such as detailed research modules of each area, preliminary research for the future research, sensor surveys for the behavior analyses of pavements and structures with installation methods and data acquisition systems, the foundation research of Integrated Instrumentation System and the Management Plan for automated measurement. Some area(structure research division, geotechnical research division) was designed the instrumentation plan because some instrument sensors must be installed during the construction of the test road. And then the instrumentation plan of each area was enforcing because a large majority of the instrument sensors must be installed after the construction of the test road. The field surveys with material property tests and pilot instrumentation test with sensor tests was also performing in accordance with the construction in the field.

  • PDF

USN 초음파 센서를 활용한 흙막이 안전관리 (Safety Management of the Retaining Wall Using USN Sonar Sensors)

  • 문성우;최은기;현지훈
    • 한국건설관리학회논문집
    • /
    • 제12권6호
    • /
    • pp.22-30
    • /
    • 2011
  • 건설현장에서 구조물 시공시 흙막이는 터파기 기초보호와 작업공간을 제공하는 역할을 한다. 흙막이 공사는 지반 굴착, 지하수 처리, 파일링, 버팀보 설치 등 복잡한 토공사 공정을 가진다. 토공사의 성격상 지반 여건 등 주위 환경의 변화에 따라서 다양한 응력변화가 발생되고, 이러한 변화가 주어진 설계한도를 벗어나면 인명사고를 동반한 붕괴사고로 이어질 수 있다. 이와 같은 이유로 구조물 기초공사에서 붕괴사고는 건설공사시 가장 주의해야 할 분야 중 하나이다. 본 논문은 흙막이 시공시 안전을 향상시키기 위한 USN (Ubiquitous Sensor Network) 기반의 데이터 획득 시스템을 제시한다. USN 기반의 데이터 획득 시스템은 초음파 센서를 활용하여 흙막이에 대한 변위를 분석하고, USN 기술이 제공하는 실시간 데이터 송수신 기능을 활용하여 원격으로 흙막이 벽체의 안정 상태를 지속적으로 관찰하고, 필요시 적절하게 대응하도록 지원한다. 연구효과를 검증하기 위하여 센서와 USN 기술을 접합하여 흙막이 벽체의 변위실험을 진행했으며, 검증결과 USN 기반 데이터 획득 시스템은 변위 데이터를 측정하여 흙막이 시공시 안전성을 향상시킬 수 있다는 것을 보여준다.

도로성토하중경감재 EPS의 공학적 특성에 관한 연구 (A Study on Engineering Characteristics of Load Reducing Material EPS)

  • 장명순;천병식;임해식
    • 한국지반공학회지:지반
    • /
    • 제12권2호
    • /
    • pp.59-70
    • /
    • 1996
  • 도로성토 하중저감공법중의 하나인 EPS공법은 초 경량재(20~30kg/m3)로서 연약지반상에 성토재로 사용하여 지반의 유효응력 증가분을 최소화함으로써 지지력과 침하에 대한 안정성을 쉽게 확보할 수 있고, 옹벽.교대등의 구조물 뒤채움재나 응급 복구용 채움재로 활용할 경우 토압 경감효과를 기대할 수 있다. 그러나 아직까지 국내에서는 공학적 성토 재료로서 활용하기 위한 물성 시험 방법이 정확히 확립되어 있지 않고 보온 재료로서의 시험 방법 및 품질 규정만이 KS에 규정되어 있다. 그로 인해 생산되는 EPS의 체계적인 토질공학적 시험 데이터 없이 성토 재료로 사용하고 있는 실정이다.따라서 본 연구에서는 공학적 재료로 활용하기 위해 필요한 강도특성, 변형특성, 흡수특성, 크리프특성 등에 대해 시험을 통하여 공학적 특성을 규명하였고, 보다 적합한 품질 규정의 제정 필요성과 일축압축강도에 의한 설계기준강도를 제안하였다.

  • PDF

가설구조물 안전성 확보 방안 연구 (Study on the Safety Assurance for the Temporary Structures)

  • 이정석;문성오;윤예빈;임남기;오태근
    • 한국안전학회지
    • /
    • 제33권1호
    • /
    • pp.73-80
    • /
    • 2018
  • According to the statistics publication of KOSHA, more than half of serious accidents at the construction sites were related to the temporary works and/or the temporary structures such as scaffoldings, shores, earth retaining walls, etc. The structural failures are occurred because of the overload acting on the structures or lack of performance of the one or more members of the structures. For the prevention of the collapse accidents relating to the temporary structures at the construction sites, we have to control construction processes not to occur the overload and also to control the performance and quality of each member of the temporary structures. MOLIT has amended the "Construction Technology Promotion Act" on Jan. 7th, 2015 to ensure the structural safety of the temporary structures. According to the Act, the designers of the construction design projects should check the structural integrity of the structures including the temporary structures and the construction companies have to let 'the Relative Professionals' confirm the structural integrity of temporary structures, the shores(${\geq}5m$ high) and the scaffolds(${\geq}31m$ high), before construction. Also, MOLIT has amended the "Regulation for Construction Technology Promotion Act" on Jul. 4th, 2016 for quality management and testing of temporary equipments. According th this regulation, the construction companies and supervisors should manage and test the temporary equipments before using them. In this paper, the standard drawings of the shores(< 5 m high) and the scaffolds(< 31 m high) and the amended "Business Guideline for Quality Management of Construction Work" are presented. As the result of this study, MOLIT noticed the amended "Business Guideline for Quality Management of Construction Work" on Jul. 1st, 2017.

Auto back 인장장치를 이용한 제거식 앵커의 적용성 (Application of Removable Ground Anchor Using Auto back Equipment)

  • 이송;이성원;박상국;김사동
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제8권4호
    • /
    • pp.223-230
    • /
    • 2004
  • 도심지의 흙막이 공사에서 앵커의 인장력에 의해 굴착면을 지지하는 제거식 그라운드 앵커의 사용성이 중시되고 있다. 현재 현장에서 주로 이용되고 있는 압축분산형 앵커는 강선의 길이가 달라 기존 인장장치로 긴장력 도입시 일정한 긴장력을 취할 수 없어 앵커 거동에 문제점을 야기하고 있다. 따라서 Auto back 인장장치를 사용하여, 각 강선에 일정한 긴장력의 도입을 시도하는 현장실험을 실시하였다. 본 연구는 기존 인장장치와 Auto back 인장장치의 현장실험에 따른 실험결과치를, 탄성론에 의거하여 계산된 이론치와 비교 분석하였다. 그 결과 기존 인장장치는 강선의 수가 증가할수록 긴장력 차이가 더 증가하고 있음이 확인되었다. 이는 하중이 집중된 강선의 극한파괴와 지반의 전단파괴를 야기할 수 있다. 따라서 Auto back 인장장치에 의한 긴장이 이루어져 강선에 긴장력을 균등 분배해야 한다.

토목 공학에서의 SASW 기법의 활용 (Applications of SASW Method to Civil Engineering)

  • 송명준;정연문;이영남
    • 지구물리와물리탐사
    • /
    • 제2권4호
    • /
    • pp.174-179
    • /
    • 1999
  • 토목구조물의 내진설계등에 필요한 탄성 계수중의 하나인 S파 속도의 측정을 위해서 통상적으로 시추공을 이용한 downhole 시험이나 crosshole 시험 또는 검층 조사를 실시하여 왔다. SASW(Spectral Analysis of Surface Waves, 주파수영역 표면파해석)기법은 이러한 공내 시험법들의 한계를 극복한 것으로서 지표면에서 표면파의 측정을 통해 지표 아래의 전단 강성 주상도를 추정하는 비파괴, 비관입 시험방법이다. 본 논문에서는 SASW기법의 원리를 간략히 언급하고 현장적용 가능성 파악을 위하여 여러 현장에서 수행한 SASW실험 결과를 요약하였다. 인천국제공항 현장에서의 동다짐 효과 판정, 마북리 시험터널의 라이닝 및 배면 암반 상태 파악, 콘크리트 옹벽의 두께 파악을 위하여 SASW기법을 성공적으로 활용하였으며 비파괴적, 경제적인 특징으로 인하여 그 외 다양한 분야에서도 SASW기법이 응용될 수 있는 가능성을 제시하였다.

  • PDF

뒷채움 모래의 다짐에 의한 투수이방성이 주동토압에 미치는 영향 (The Effects of Permeability Anisotropy on the Active Earth Pressure In Compacted Sand Backfill)

  • 정성교;신종보;전용백
    • 한국지반공학회지:지반
    • /
    • 제2권3호
    • /
    • pp.27-36
    • /
    • 1986
  • 뒷채움 다짐한 옹벽에 저해 침투빙가 주동토압에 미치는 영향을 관찰하기 위하여 책험과 이론해석에 의하여 연구가 수행되었다. 다짐방법이 모래의 투빙성에 미치는 영향을 관찰하기 위하여 특별히 고안된 정수두 투수시험장치와 전기전도도 측정법에 의하여 실험이 행해졌다. 실험결과, 다짐방상에 직각인 방향과 평행한 방향의 투수계수의 비(kz/ky)는 공소비와 반대수방안지에서 직선관계로 보이고, 상대밀도가 90% 이상에서는 kz/ky의 값이 2-4로 나타났다. 이 때 다짐방법은 투수계수에 별다른 영향을 주지 않았으며, 굵은 모래보다 가는 모래에서 이방성이 크게 나타났다. 이방성 침투가 주동토압에 미치는 영향을 관찰하기 위하여 확장된 Gray 이론에 실험결과를 적용하여 보았다. kz/ky의 값이 클수록 주동토압의 크기는 작아지고, 벽면마찰의 영향은 크지 않았다.

  • PDF