• Korean Journal of Biological Psychiatry
• /
• v.2 no.2
• /
• pp.275-280
• /
• 1995

Smooth pursuit eye movement, one of the reliable biological markers of schizophrenia, is not always abnormal in schizophrenic patients. Therefore the authors studied it in schizophrenic patients and normal controls and compared the results according to the presence or abscence of family history of psychosis and types (type I and type II). The results are as follows: 1) In the 18 normal control group (8 mole, 10 female), there was no sex difference in the responses of smooth pursuit eye movement. 2) In th 44 schizophrenic group (28 male, 16 female), there also was no sex difference in the responses of smooth pursuit eye movement. 3) In comparison of 44 schizophrenic group to 18 normal control group, there was significantly increased abnormal response in smooth pursuit eye movement in schizophrenic group (P < 0.005). 4) In schizophrenic group, there was no difference in the responses of smooth pursuit eye movement between type I and type II schizophrenia. 5) The presence or abscence of family history of psychosis made no difference in the responses of smooth pursuit eye movement in schizophrenic group. 6) Subdivision of type I or type II in each case of presence or abscence of family history made no difference in the responses of smooth pursuit eye movement in schizophrenic group.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.29-35
• /
• 2009

Purpose: To develop a relay lens type scope with 70 mm eye relief. Methods: By using Sigma 2000 design program, we designed and manufactured a relay lens type scope with 70 mm eye relief, which is integrated after designing an objective part with relay lenses and an eyepiece part, respectively. Results: The characteristics of the relay lens type scope with 70 mm eye relief whch is designed and manufactured by methods, which integrate after respectively designing an object part with relay lenses and an eyepiece part, have the magnification of $+4{\times}$,the length from 1st lens to last lens of about 105 mm, the barrel diameter of 18mm, and the effective diameter of 13 mm. Also we know that the resolution line width is 275 cycles/rad at the 30% MTF value criterion. Conclusions: We could design and manufacture the relay type scope with 70 mm eye relief, the characteristics of which have the magnification of $+4.0{\times}$the MTF above 30% at 275 cycles/rad, and the length from 1st lens to last lens of about 105 mm.

• Fashion, Industry and Education
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2016

In the present study, the materials, sizes, and designs of blind eye patch products of skin-adhesive type and glass-attachment type currently available in the market will be analyzed and ergonomically appropriate blind eye patches will be developed. Although these skin-adhesive type eye patches were easy to use, they had shortcomings such as skin troubles due to the adhesive used on the weak and sensitive skin of children and the fact that eyebrows are pulled out and the skin is irritated when the eye patches are detached after being attached. The non-adhesive type eye patches were blind patches to be worn by putting into glasses. These products were made using diverse materials such as neoprene, non-woven fabrics, and felt and showed differences in tactile impressions and irritation to the skin depending on material characteristics. In addition, most products were efficient in blocking light with three-dimensional oval designs comprising darts. In the present study, blind eye patches were designed to reduce skin troubles by using sweat-absorbing and quick-drying functional materials with soft tactile impressions. In addition, to increase the effect to block light and the degree of tight contact with the skin when the blind eye patches are worn compared to existing eye patch designs, the sides of the wings of the blind eye patches were widened, glass frame fixing plates were added, and the darts were made to be curved thereby making an ergonomic design reflecting the shape of the face. The non-adhesive type blind eye patches developed in the present study are considered to enhance the wearing sensation with the use of the material without skin irritation but with cushioning feelings and the ergonomic design reflecting the contour of the face.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.428-433
• /
• 2004

The aim of this study was to investigate the histochemical parameters of muscle fibers, and to estimate the correlation between these histological parameters and carcass traits in pigs. A total of 230 crossbred Duroc$\times$(Yorkshire$\times$Landrace) pigs (149 gilts and 81 castrated male pigs) was evaluated. Carcass traits (carcass weight, backfat thickness, and loin eye area), muscle fiber size (crosssectional area, diameter, and perimeter), muscle fiber number (density of fibers/$mm^2$ and total number of fibers), and fiber type composition (percentages of myofibers and relative areas of each fiber type) were evaluated. Mean cross-sectional area (CSA) and type IIB fiber CSA were positively correlated to carcass weight, backfat thickness and loin eye area. Mean fiber CSA was mostly related to type IIB CSA (r=0.98) as a result of the high percentage of type IIB fibers in the longissimus muscle. Correlations between fiber diameters and perimeters were also high, and showed similar results with CSA. Mean fiber density was negatively correlated to carcass weight (r=-0.24), backfat thickness (r=-0.18) and loin eye area (r=-0.27). To the contrary, total fiber number was positively correlated with carcass weight (r=0.27) and loin eye area (r=0.53). Carcass weight and loin eyZe area were not significantly related to muscle fiber composition. For backfat thickness, there was an opposition between type IIA percentage, which was positively related and type IIB percentage, which was negatively related. Fiber type composition of type I and IIA fibers were negatively correlated to that of type IIB fibers (r=-0.67 to -0.74). In the present study, carcass weight and loin eye area were positively correlated to CSA and negatively correlated to fiber density. But, these relationships were generally low. The fiber density was strongly affected by muscle fiber size and the total fiber number was affected either by CSA of muscle fiber and loin eye area. Fiber type composition was much more related to their numerical abundance than their CSA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2016

We present the results of a study of a piezoelectric generator that generates electricity by the application of tension to an element. A device is named "EYE-type generator". The EYE-type generator consists of a rectangular ceramic and two elastic body plates that are attached to upper and lower surfaces of a ceramic. If tension is applied to both ends of the elastic body, that tension is transformed to pressure on the ceramic through a change in the form of the elastic body, causing a piezoelectric effect whereby electricity is generated by the ceramic. This generator is relatively durable because a forces are not applied directly to the ceramic. We examined dependencies of the generator's output characteristics on the size of the ceramic and elastic body. A resonance and output characteristics were analyzed by using a finite element method. The generator was fabricated based on results of the analysis, and this was attached to a frequency-controllable vibrator to measure the output characteristics. The measured results were compared with results of the simulation, and the results pointed to the practicality of the design.

• Journal of Korean Elementary Science Education
• /
• v.38 no.3
• /
• pp.395-405
• /
• 2019

The purpose of this study is to analyze the process of creative science problem solving (CSPS) in elementary school students. To do this, 6 graders (n=9) at a elementary school in Seoul were participated. In this study, fixed eye-tracker with 250 Hz sampling and observation camera were used. The results of this study, the students with higher ability to solve creative science problems had a slower saccade, and had more visual attention on core clues and a greater number of eye changes. Therefore, students with higher ability to solve creative science problems showed more effective eye movement and faster information processing to solve problems. The CSPS types of elementary students were classified as 'declarative knowledge type', 'procedural knowledge type', 'conditional knowledge type', 'knowledge lack type'. Because each type appears to be complementary, CSPS process for elementary students who have integrated the four types was devised. The results of this study can be used as basic data for understanding elementary school students' CSPS and will help to develop and guide creative science teaching and learning programs useful to elementary school students and science gifted students.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.635-639
• /
• 2013

Generating output characteristics of a EYE-type piezoelectric generator depending on ceramic size and materials of the elastic body were studied. EYE-type piezoelectric-generating device consist of the ceramic was attached between the both elastic body. piezoelectric-generating is that if the tension occurred at both ends of an elastic body, the piezoelectric effect occurs at ceramics through the form change of the elastic body. The structure of this EYE-type generator use various area. than a existing type generator, because the ceramic position of the directly force at does not apply. Resonance and output characteristics of the generator were analyzed by using FEM program. Generators were fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure output characteristics. Also, the experimental results were compared with the simulated results. As a result, output characteristics of the generator increased depending on the increase in ceramic thickness. In case of increase in ceramic width, resonance frequency of the generator also decreased.

• Journal of Multimedia Information System
• /
• v.7 no.1
• /
• pp.11-16
• /
• 2020

Deep Learning has become the most important technology in the field of artificial intelligence machine learning, with its high performance overwhelming existing methods in various applications. In this paper, an interactive window service based on object recognition technology is proposed. The main goal is to implement an object recognition technology using this deep learning technology to remove the existing eye tracking technology, which requires users to wear eye tracking devices themselves, and to implement an eye tracking technology that uses only usual cameras to track users' eye. We design an interactive system based on efficient eye detection and pupil tracking method that can verify the user's eye movement. To estimate the view-direction of user's eye, we initialize to make the reference (origin) coordinate. Then the view direction is estimated from the extracted eye pupils from the origin coordinate. Also, we propose a blink detection technique based on the eye apply ratio (EAR). With the extracted view direction and eye action, we provide some augmented information of interest without the existing complex and expensive eye-tracking systems with various service topics and situations. For verification, the user guiding service is implemented as a proto-type model with the school map to inform the location information of the desired location or building.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.119-120
• /
• 2008

A HMD type multi-focus 3D display system is developed and proof about satisfaction of eye accommodation is tested. Four LEDs(Light Emitting Diode) and a DMD are used to generate four parallax images at single eye and any mechanical part is not included in this system. The multi-focus means the ability of monocular depth cue to various depth levels. By achieving multi-focus function, we developed a 3D display system for only one eye, which can satisfy the accommodation to displayed virtual objects within defined depth. We could achieve a result that focus adjustment is possible at 5 step depths in sequence within 2m depth for only one eye. Additionally, the change level of burring depending on the focusing depth is tested by captured photos and moving pictures of video camera and several subjects. And the HMD type multi-focus 3D display can be applied to a monocular 3D display and monocular AR 3D display.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.524-529
• /
• 2020

We propose a depth-fused-type three-dimensional (3D) near-eye display implemented using a birefringent lens set that is made of calcite. By using a birefringent lens and image source (28.70 mm × 21.52 mm), which has different focal lengths according to the polarization state of the incident light, the proposed system can present depth-fused three-dimensional images at 4.6 degrees of field of view (FOV) within 1.6 Diopter (D) to 0.4 D, depending on the polarization distributed depth map. The proposed method can be applied to near-eye displays like head-mounted display systems, for a more natural 3D image without vergence-accommodation conflict.