• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.151-159
• /
• 2022

In this paper, we implement a digital multi-beamformer using FPGA(Field Programmable Gate Array) which has advantages in parallel and real-time data processing. This is accomplished through the use of not only high-speed data communication but also multiple beam forming, which is currently required by MFR(Multi Function Radar). As a result, the beamformer can process 24 Gbps throughput in real-time and form 5 digital beams at the same time. It is also compared to the results of Matlab simulations. We demonstrate how an implemented beamformer can be used in an MFR system by using a digital array antenna.

• 청정기술
• /
• 제7권3호
• /
• pp.215-223
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as electrolyzed water(EW) are being studied. In this work, intentionally contaminated Si wafers were cleaned using the electrolyzed water. The electrolyzed water was generated by an electrolysis system which consists of three anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH4Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO2 concentration changes dissolved from air. Contact angles of UPW, AW, and CW on DHF treated Si wafer surfaces were measured to be $65.9^{\circ}$, $66.5^{\circ}$ and $56.8^{\circ}$, respectively, which characterizes clearly the eletrolyzed water. To analyze the amount of metallic impurities on Si wafer surface, ICP-MS was introduced. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. To analyze the number of particles on Si wafer surfaces, Tencor 6220 were introduced. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about $9{\ell}$ chemicals, while EW did only $400m{\ell}$ HCl electrolyte or $600m{\ell}$ NH4Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for promoting environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.125-132
• /
• 2013

Objectives The purpose of this study was to compare the effects of acupuncture treatment with those of collaborative treatment regarding acute Bell's palsy. Methods Twenty-six patients who received outpatient treatment between March 2012 and February 2013 were divided into 2 groups. The East-West treatment group (EW group, n=12) received prednisolone and then acupuncture afterwards. The Eastern treatment group (E group, n=14) received just acupuncture. Acupuncture was administered 3 to 4 times a week, and both groups were educated to practice facial muscle exercises at home. Evaluations were made before treatment, after 1 week, 2 weeks, and 3 weeks using the House-Brackmann facial nerve grading system. Results Compared to before treatment, the House-Brackmann grades of both EW and E groups after 1, 2 and 3 weeks of treatment significantly decreased (p<0.05). Regarding group comparison, the House-Brackmann grade of the EW group was significantly lower than the E group at 1 week (p=0.043), but there was no significant difference at 2 and 3 weeks. Regarding improvement of House-Brackmann grades, there was no significant difference between the two groups at 1, 2 and 3 weeks (p>0.05). Conclusions Compared to just acupuncture treatment, collaborative treatment with prednisolone significantly improved the House-Brackmann grade after 1 week, but there was no difference as time passed. Because early intervention determines the prognosis of Bell's palsy, collaborative treatment at the early stage will be clinically helpful to patients.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.284-289
• /
• 2016

최근 주요 사회기반시설물로 이루어진 뉴질랜드 Christchurch 지역에 상당히 큰 지반운동을 유발하고 짧은 기간에 연속적으로 발생한 지진충격의 전례 없는 사례가 발생하였으며 특히 액상화 지역에서 발생된 영구지반변형과 하수도관 손상에 관한 방대하고 정확한 자료가 수집되었다. 본 연구에서는 이 지역의 2011년 2월 22일 지진규모($M_w$) 6.2 지진발생 후 얻어진 하수도관 길이 및 손상갯수와 영구지반변형지역에서 지진발생 전후에 얻어진 높은 해상도의 라이다데이터로부터 계산된 지반 각변형과 횡방향 지반변형률의 자료를 바탕으로 지리정보체계(GIS) 모델링과 선형회귀분석을 수행하여 도기와 콘크리트 하수도관의 손상율(손상갯수/1km)을 산정하였다. 연구 결과 두 매설관 모두 지반 각변형과 횡방향 지반변형률에 따라 유사한 경향으로 손상됨을 알 수 있으며 강성이 더 큰 콘크리트 하수도관의 손상이 더 작게 나타남을 알 수 있으며 이러한 선형회귀분석 결과는 추후 지진 시 발생할 수 있는 영구지반변형으로 인한 도기와 콘크리트 하수도관 손상율 예측에 유용하게 사용될 수 있다.

• 천문학회보
• /
• 제46권1호
• /
• pp.34.4-35
• /
• 2021

We present the TESS photometry and our high-resolution spectra of the semi-detached Algol EW Boo. For an orbital period study, we collected all available times of minima including ours for the last 30 years. It is found that the eclipse timing variation of the system can be represented by a periodic oscillation of 18.5±1.0 yr plus a secular period increase with a rate of [dP/dt]_orb=-6(±3)×10^-8 d yr^-1. From our observed spectra, the effective temperature of the primary star was determined to be T_eff,1=8560±118 K. From a simultaneous analysis of the TESS light and our double-lined radial velocity curves, the absolute masses, radii, and luminosities are M₁=2.30±0.07M_⊙, M₂=0.38±0.01M_⊙, R₁=1.92±0.02 R_⊙, R₂=1.27±0.01 R_⊙, L₁=1.92±0.02 L_⊙, and L₂=0.752±0.007 L_⊙, respectively. Multiple frequency analyses were carried out for the light residuals after subtracting the binary star model. We detected a total of 75 frequencies in the region of 16.50-104.8 day-1. Our results demonstrate that the more hotter primary star of EW Boo is a δ Sct pulsator by considering its position in the δ Scuti region of the Cepheid instability strip and pulsational characteristics.

• 자원환경지질
• /
• 제44권5호
• /
• pp.413-431
• /
• 2011

옥천변성대 남서부에 위치하는 전남 해남군 황산면 모이산 지역에는 백악기 말 유천층군 해남층의 황산 화산쇄설 암을 모암으로 하는 천열수 금-은 광화대가 발달한다. 본 연구는 광화대의 형성과 관련된 지질구조를 파악하기 위해 모이산 지역의 층리배열, 습곡, 단층, 단열계, 석영맥의 특성, 단열계의 상대적인 발달순서 등을 조사하였고, 이를 바탕으로 광화작용이 발생할 당시의 지구조환경을 고찰해 보았다. 층리는 동북동 주향 방향이 우세하며 북북서 내지 남남동 방향의 저각 경사를 보이고 분산된 층리 배열은 경사-이동 단층 이외에 (동)북동 방향의 준수평-직립 개방습곡에 의해 규제되어 있다. 단열계는 적어도 6~7회의 변형단계를 걸쳐 형성되었다. D1 단계; 연장성이 우세한 동서 (D1-1)와 남북(D1-2) 방향의 주 단열조 형성기, D2 단계; 북서 방향의 인장단열 형성기, 동서(우수향)와 남북(좌수향) 방향의 공액 전단단열 운동기, D3 단계; 북동 방향의 인장단열 형성기, 동서(좌수향)와 남북(우수향) 방향의 공액 전단단열 재활동기, D4 단계; 연장성이 미약한 남북 방향의 인장단열 형성기, D5 단계; 북서 방향의 인장단열 재형성기. 동서(우수향)와 남북(좌수향)방향의 공액 전단단열 재활동기, D6 단계; 연장성이 미약한 동서 방향의 인장단열 형성기. 변형단계별 단열조의 출현빈도는 D1-1(19.73 %)> D1-2(16.44 %)> D3=D5(14.79 %)> D2(13.70 %)> D4(12.33 %)> D6(8.22 %) 순으로 우세하게 나타나고 평균개수/1 m는 D6(5.00개)> D5 = D4(4.67개)> D2(4.60개)> D3(4.13개)> D1-1(3.33개)> D1-2(2.83개) 순으로 높게 나타난다. 전체 단열조의 평균 조밀도는 420개로서 모이산 지역의 단열조는 평균 23.8 cm 간격 이상으로 발달한다. 석영맥의 방향성별 출현빈도는 동서 방향(52 %)> 북서 방향(28 %)> 남북 방향(12 %)> 북동 방향(8 %) 순으로 우세하게 나타난다. 전체 석영맥의 평균 조밀도는 4.14개로 나타나고 모이산 지역의 석영맥은 평균 24.2 cm 간격 이상으로 발달한다. 석영맥에 대한 미구조 연구결과, 천열수 금-은 광화작용(약 77.9~73.1 Ma)은 지구조적 응력이 아닌 천열수 파괴 단열작용과 직후의 정적인 지구조환경 하에서 기존에 형성된 연장성이 우세한 D1 단계의 동서 방향과 남북 방향의 단열조를 따라 발생한 것으로 보인다. 모이산 지역의 D1 단열작용은 유천층군과 불국사 화성압류의 화성활동과 변형을 초래하는 후기 백악기 이자나기판의 북향-사교 섭입작용과 관련하여 남북 방향의 압축력과 인정력이 교호하는 불안정한 지구조환경 하에서 발생하였던 것으로 고찰된다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.124-128
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature Process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as functional water cleaning are being studied. The electrolyzed water was generated by an electrolysis system which consists of anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH$_4$Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO$_2$ concentration changes dissolved from air. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about 9$\ell$chemicals, while EW did only 400$m\ell$ HCI electrolyte or 600$m\ell$ NH$_4$Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for eliminating environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.223-226
• /
• 2001

In this paper, we propose a robust and fragile watermarking technique for tamper proofing of still images. Robust watermarks are embedded by quantization with a robust quantization step-size, and it is imperceptible value for human visual system. Fragile watermarks are embedded by thresholding and quantization with EW(Embedded Zerotree Wavelet) algorithm. The proposed method enables us to distinguish malicious change from non-malicious change. Futhermore this technique enables us to find tampering regions and degrees.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.271-275
• /
• 1996

In this paper, an automatic spot inspection system has been developed for camera target lens using the computer aided vision system. The developed system comprises: light source, magnifying optics, vision camera, XY robot, and a PC. An efficient algotithm for the spot detection has been implemented, thus up tof ew micrometer size spots can be effectively identified in real time. The developed system has been fully interfaced with XY robot systenm, PLCs, thus the practical spot inspection system has been implemented. The system has been applied to a practical camera manufacturing process, and showed its efficiency.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.154-160
• /
• 2007

A direction finding system test-bed(DFSTB) at the electronic warfare communication-band is presented to efficiently evaluate and optimize the performance of the direction finding system through the indoor test setup. This test-bed gives a significant benefit to the designers of the direction finding system because it allows flexible test and design trade-off in the system design cycle. The system description and implementation of test-bed architecture, and the experiment results of direction finding accuracy according to modulation schemes are presented.