• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.39-45
• /
• 2008

Formaldehyde and volatile organic compounds (VOCs) are emitted from wood-based panels that have been made using wood particles, wood fiber, wood chips, formaldehyde-based resins and so on. In this study, we examined formaldehyde and total VOCs (TVOC) emission behaviors for plywood overlaid with water-soluble phenolic resin impregnated linerboard (PL), and two kinds of surface materials (decorative veneer and pre-impregnated finishing foil) that were adhered onto the PL that named DPL and PPL. EVA (ethyl vinyl acetate) was used to overlay the decorative veneer and pre-impregnated finishing foil on the plywood with water-soluble phenolic resin impregnated linerboard by a hot press instrument. The debonding test and accelerated aging test were conducted to assess their mechanical properties. Formaldehyde and TVOC emission concentrations were measured using the FLEC method and a VOC Analyzer, respectively. The debonding test results of PL, DPL and PPL were 1.2, 1.5, and $0.5N/mm^2$, respectively. The surface appearance of the samples were not changed after the accelerated aging test. The PL and DPL exhibited reduced formaldehyde and TVOC emission levels, respectively. In the case of PPL, the VOC value was relatively higher than those of PL and DPL.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2011

This study was carried out to establish a production system of cut flowers and bulbs of oriental hybrid lilies in highland in summer. In study, effect of cultivation type and shading was examined. The cultivation types used in the bulb production experiments were greenhouses with no cover, greenhouses with net screen (net screen house), and greenhouses with EVA roof cover and net screen sides (rain shelter house). Net screen and rain shelter houses had either 0 or 30% shading. Cultivation type had significant effect and shading had a minor effect on bulb production. The greatest yield and quality of produced bulbs were obtained in the rain shelter house with 30% shading. From the results of this study, it is concluded that dispersed production of high quality cut lily flowers and bulbs could be achieved during the summer in highland.

• Imaging Science in Dentistry
• /
• v.53 no.1
• /
• pp.69-75
• /
• 2023

Purpose: Maxillofacial trauma predominantly affects young adults between 20 and 40 years of age. Although radioprotection is a legal requirement, the significant potential of dose reduction in computed tomography (CT) is still underused in the clinical routine. The objective of this study was to evaluate whether maxillofacial fractures can be reliably detected and classified using ultra-low-dose CT. Materials and Methods: CT images of 123 clinical cases with maxillofacial fractures were classified by two readers using the AOCOIAC software and compared with the corresponding results from post-treatment images. In group 1, consisting of 97 patients with isolated facial trauma, pre-treatment CT images at different dose levels (volumetric computed tomography dose index: ultra-low dose, 2.6 mGy; low dose, <10 mGy; and regular dose, <20 mGy) were compared with post-treatment cone-beam computed tomography (CBCT). In group 2, consisting of 31 patients with complex midface fractures, pre-treatment shock room CT images were compared with post-treatment CT at different dose levels or CBCT. All images were presented in random order and classified by 2 readers blinded to the clinical results. All cases with an unequal classification were re-evaluated. Results: In both groups, ultra-low-dose CT had no clinically relevant effect on fracture classification. Fourteen cases in group 2 showed minor differences in the classification code, which were no longer obvious after comparing the images directly to each other. Conclusion: Ultra-low-dose CT images allowed the correct diagnosis and classification of maxillofacial fractures. These results might lead to a substantial reconsideration of current reference dose levels.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.518-526
• /
• 2019

Background: Additive manufacturing (AM) is a rapidly expanding new technology involving challenges to occupational health. Here, metal exposure in an AM facility with large-scale metallic component production was investigated during two consecutive years with preventive actions in between. Methods: Gravimetric analyzes measured airborne particle concentrations, and filters were analyzed for metal content. In addition, concentrations of airborne particles <300 nm were investigated. Particles from recycled powder were characterized. Biomonitoring of urine and dermal contamination among AM operators, office personnel, and welders was performed. Results: Total and inhalable dust levels were almost all below occupational exposure limits, but inductively coupled plasma mass spectrometry showed that AM operators had a significant increase in cobalt exposure compared with welders. Airborne particle concentrations (<300 nm) showed transient peaks in the AM facility but were lower than those of the welding facility. Particle characterization of recycled powder showed fragmentation and condensates enriched in volatile metals. Biomonitoring showed a nonsignificant increase in the level of metals in urine in AM operators. Dermal cobalt and a trend for increasing urine metals during Workweek Year 1, but not in Year 2, indicated reduced exposure after preventive actions. Conclusion: Gravimetric analyses showed low total and inhalable dust exposure in AM operators. However, transient emission of smaller particles constitutes exposure risks. Preventive actions implemented by the company reduced the workers' metal exposure despite unchanged emissions of particles, indicating a need for careful design and regulation of the AM environments. It also emphasizes the need for relevant exposure markers and biomonitoring of health risks.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.3-8
• /
• 2020

Genital lymphedema (GL) is an uncommon and disabling disease that manifests as enlargement of the genital region resulting from the disturbance of lymphatic drainage. Although conservative treatment such as decompression is typically the first-line approach, surgical intervention has been shown to be effective in certain cases. This study aimed to systematically review studies evaluating available surgical alternatives for the treatment of male GL. A systematic search strategy using keyword and subject headings was applied to PubMed, Scopus, EMBASE, and Cochrane Library in May 2019. Studies investigating various surgical techniques to treat penile and scrotal lymphedema were included. The potential risk of bias of included trials was evaluated using the methodological index for non-randomized studies (MINORS). In total, 13 studies met the inclusion criteria, nine of which were determined to be high-quality. The average MINORS score was 12.45 for studies involving excision and 14 for studies involving lymphovenous anastomosis (LVA). The most common reason for a low score was a failure to describe the inclusion criteria. Recurrence of lymphedema during follow-up was reported in four studies involving excision and in no studies involving LVA. In general, the quality of the included literature was considered to be fair. Although surgical intervention might not always prevent the recurrence of lymphedema, all of the studies reported improved quality of life after the procedure. This study could be used as the basis for evidence-based guidelines to be applied in clinical practice for managing male GL.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.93-99
• /
• 2008

The purpose of this study is to evaluate the bond strength and corrosion resistance of coated reinforcing bar using hybrid-type polymer cement slurry(PCS). PCS coated steels, which is made from two types of polymer dispersions such as St/BA and EVA are prepared, and tested for bond strength and various corrosion resistances such as autoclaved cure, carbonation and H2SO4 solution. From the test results, the bond strength of PCS coated reinforcing bar using ordinary portland cement at 1-5, 2-1 and 4-5 of mixes is higher than that of uncoated regular steel. However, bond strength of almost PCS coated reinforcing bars using ultra rapid high strength cement is higher than that of epoxy coated bar, is also in ranges of 102% to 123% compared to that of uncoated regular steel. In autoclaved accelerating test, the ratio of corrosion of uncoated regular steel is increased with the increase in NaCl content, but the corrosion of PCS coated steel was very small. In the acceleration test for carbonation, increasing the amount of NaCl the corrosion of coated steel did not produce. The corrosion of uncoated regular steel is increased with the increase in the amount of NaCl. It can be seen that the NaCl following the acceleration test for carbonation can lower the corrosion resistance of concrete. As a result, the corrosion of steel largely is affected by the acceleration curing, chloride ion penetration and carbonation and shown more severe corrosion by applying complex factors. These corrosions of steel can be suppressed by the coating of PCS.

• Toxicological Research
• /
• v.17
• /
• pp.323-327
• /
• 2001

March 19, 1999, the renovation qf the runway of the Bo-Fai ai1field in Hua Hin, Prachubk-erikhan, Thailand, unearthed chemicals which were left over from the project "anch Hand Operation" held during the Vietnam war era. The chemical mixtures were analyzed by the US EPA, the Department oj Medical Sciences (DMSc), Ministry oj Public Health (MoPH) and the Pollution Control Department (PCD), the Ministry oj Science Technology and Environment (MOSTE) of Thailand, The samples were found to contain several defoliants used in the operation. They were 2,4-D, 2,4,5-T, Dicamba, Cocydelic acid, and Dioxins. Due to the complexity of the issue, the multiplicity of possible health effects, and the socio-economic implications for imports and exports, the Thai Society of Toxicology submitted a proposal to request World Health Organization (WHO), Geneva. The assistance is for the area of chemical safety and called for immediate action to explore the magnitude qf risk involved with Dioxins. In this paper we present our approach to health risk assessment which takes into an account the epidemiological studies of high-risk group exposed to the Ranch Hand operation. Dioxins are endocrine disruption chemicals which public concerns are developed due to presumption that a hazard exists (www.eva.gov/dioxins/html) for which current methodologies are deemed insufficient. The recent concepts of how oxidative stress toxicants may affect health end points and biomarkers of exposure of exposed individuals are discussed. While research activities are undergoing, The Thai Society of Toxicology do not anticipate significant risk to local residents and the environment due to our concurrence with opinion from the international experts invited by the World Health Organization proposed to the local experts at a workshop in Bangkok.n Bangkok.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.137-143
• /
• 2019

Objective: The aim of this study was to compare male and female geese of two contrasting genotypes in terms of fatty acid composition, indexes related to human health, lipid metabolism and oxidative stability of the meat. Methods: The experiment was carried out on total of 120 geese of two different genotypes; the native breed Czech goose (CG) and commercial hybrid Novohradska goose (NG). One-d-old goslings were divided into 4 groups according to genotype and sex, and 8 birds from each group were slaughtered at 8 weeks of age. Results: The effects of the interactions between genotype and sex were observed on growth performance and carcass traits. Final body weight (p<0.001), daily weight gain (p<0.001), daily feed intake (p<0.001), slaughter weight (p<0.001), and cold carcass weight (p<0.001) were highest in NG males and lowest in CG females. The meat fatty acid composition results showed effects of both genotype and sex on the total n-6 and the total polyunsaturated fatty acid (PUFA) content, as well as the PUFA n-6/PUFA n-3 ratio. Regarding genotype, the total n-6, the total PUFA content and the PUFA n-6/PUFA n-3 ratio were higher in CG, and higher values were found in females. In terms of the lipid metabolism, ${\Delta}^5-{\Delta}^6$ desaturase (p = 0.006) was higher in males. The meat oxidative stability results revealed an interaction between genotype, sex and storage time (p<0.001). The highest (13.85 mg/kg) malondialdehyde content was measured in the meat of CG females after 5 days of storage and was presumably related to a higher PUFA content. Conclusion: NG had a relatively higher growth rate and meat oxidative stability, whereas the advantage of CG meat is its favourable fatty acid profile characterized by a higher PUFA content.

• Korean Journal of Head & Neck Oncology
• /
• v.9 no.1
• /
• pp.25-32
• /
• 1993

The nodular hyperplasia of the thyroid is a common thyriod disease. Nodular hyperplasia does rarely progress to thyroid cancer. The differentiation of a nodular hyperplasia from a neoplasm may be simple or difficult, both clinically and anatomically. The papillary carcinoma of the thyroid is the most common type of thyroid malignancies. There were few studies about cytogenetic observation in thyroid cancer. But only one case of banding observation in nodular hyperplasia have been reported. In order to compare the chromosomal changes in the thyroid cancer and the noncancerous thyroid disease, we performed cytogenetic analysis in two papillary carcinoma and two nodular hyperplasia after cell culture. The chromosomal pattern of the nodular hyperplasia found was very heterogenous but no clonal abnormaly in both cases was observed. Case I : A modal chromosomal number was in 42-46 range. Chromosome 8, 19, 21. 22 were commonly lost. 9 structural anomalities among 51 analysed cells were observed but they were not clonal. Case II: A modal chromosomal number was 43. Chromosome 17 and 19 were commonly lossed. Common cytogenetic characters of this two nodular hyperplasia are hypodiploidity and very heterogenous chromosomal pattern. The result about the papillary carcinoma are as follow. In one case some numerical and structural chromosomal changes were observed. But they were not clonal abnormality. In another case the chromosomal pattern found was very heterogenous with a clonal abnormality of del(11)(q23). The modal number was 46. The del(11)(q23) a chromosomal change in papillary carcinoma of the thyroid have previously been reported(Eva Olah et al. 1989). We suggest that 11q deletion may be important role to pathogenesis of papillary carcinoma of the thyroid. According to this results, we could not find out specific differences about chromosomal changes and any relationship between the papillary carcinoma and the nodular hyperplasia.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.2-11
• /
• 2021

Objective: The aim of the study was to evaluate the influence of polymorphic loci and other factors on milk performance and the technological properties of milk. Methods: The analysis was performed on Simmental and Holstein cows in field conditions (n = 748). Milk yield in kg, fat and protein percentage and yield were evaluated. Technological properties were evaluated by milk fermentation ability, renneting, and an alcohol test. Polymorphisms in the acyl-CoA diacylgycerol transferase 1 (DGAT1), leptin (LEP), fatty acid synthase (FASN), stearoyl CoA desaturase 1 (SCD1), casein beta (CSN2), casein kappa (CSN3), and lactoglobulin beta genes were genotyped, and association analysis was performed. Results: The DGAT1 AA genotype was associated with higher milk, protein and fat yields (p<0.05). The MM genotype in the LEP gene was associated with a lower protein percentage and the W allele with a higher protein percentage (p<0.05). In cows with the FASN GG genotype, the protein percentage was higher, but the A allele was associated with higher milk, protein and fat yields than the G allele. The TT genotype in SCD1 was associated with the lowest milk, protein and fat yields and with the highest milk protein percentage (p<0.01). The T allele had higher values than the C allele (p<0.05) except for fat percentage. The genotype CSN3 AA was associated with a significantly heightened milk yield; BB was associated with a high protein percentage. The effect of the alleles on the technological properties was not significant. The CSN2 BB genotype was associated with the best alcohol test (p<0.01), and the renneting order was inverse. Milk from cows with the CSN2 A1A1 genotype was best in the milk fermentation ability. CSN3 significantly affected the technological properties. Conclusion: The findings revealed the potential of some polymorphic loci for use in dairy cattle breeding and for the management of milk quality. In field research, the pivotal role of farms in milk yield, composition and technological properties was confirmed.