• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.57-62
• /
• 2013

In this paper, we have implemented an overflow valve for EURO5 Type and the performance evaluation system based on IEEE802 protocol. On injecting a diesel oil into an engine, it is necessity for an overflow valve that can sustain an engine oil status in front of the engine. In order to evaluate the performance of overflow valve, we need the leak test system with IT. The leak test system checks the pressure, switching time and operating time.

• Journal of Korea Trade
• /
• v.23 no.2
• /
• pp.110-126
• /
• 2019

Purpose - This paper examines the recently realized continuous volatility and discrete jumps of US Dollar/Euro returns using the frequency of five minute returns spanning the period from February 2010 through February 2018with periodicity filters. Design/Methodology - This paper adopts the nonparametric estimation. The realized volatility and Realized Outlying Weighted variations show non-Gaussian, fat-tailed, and leptokurtic distributions. Some significant volatility jumps in returns occurred from 2010 through 2018, and the very exceptionally large and irregular jumps occurred around 2010-2011, after the EU financial crisis, and 2015-2016. The outliers occurred somewhat frequently around the years of 2015 and 2016. Originality/value - When we include periodicity filters of volatility such as MAD, Short Half Scale, and WSD, the five minute returns of US Dollar/Euro exchange rates have smaller daily jump probabilities by 20-30% than when we do not include the periodicity filters of volatility. Thus, when we consider the periodicity filters of volatility such as MAD, Short Half Scale, and WSD, the five minute returns of US Dollar/Euro have considerably smaller jump probabilities.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.200-204
• /
• 2016

In this paper, we have estimated the performance of an overflow valve for EURO type CRDI(common rail direct injection) engine. In order to implement the overflow valve with friendly circumstance, it is necessity for considering spring load. Especially, the performance evaluation of diesel car with accuracy control will be considered a mileage improvement and circumstance regulation. In order to evaluate the performance of overflow valve, The leak test system checks the pressure, switching time and operating time under 3.0 bar below 100 cc, 3.3 bar among 150 cc and 200 cc, finally 4.0 bar upper 250 cc.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2008

This study surveys the types of form works used for constructing composite basement walls found in domestic construction sites. Based on expert surveys, the research provides criteria for selecting a form work type and cost-benefit analysis for different types of form works. In selecting a form work type, safety was considered the most important factor. It is induced from the survey that a successful construction requires a form work type that could solidly bear the lateral pressure of concrete rather than other types that cut back the cost and shorten the construction period. In the cost-benefit analysis, the benefit was the highest in 'euro-form+soldier system', and the cost was most competent in 'rib-lath+soldier system'. In considering benefit and cost together, 'euro-form+soldier system' was judged to be the best option. This is likely to be attributed to the following reasons: site workers are familiar with euro-forms because it is the most widely used; and, soldier system is more reliable in bearing lateral pressure compared to steel pipes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1890-1895
• /
• 2013

In this paper, we have implemented an overflow valve for EURO5 Type and the performance evaluation system based on IT. On injecting a diesel oil into an engine, it is necessity for an overflow valve that can sustain an engine oil status in front of the engine. In order to evaluate the performance of overflow valve, we need the leak test system with IT. The leak test system checks the pressure, switching time and operating time.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.131-138
• /
• 2019

Diesel engines have important advantages over its gasoline counterpart including high thermal efficiency, high fuel economy and low emissions of CO, HC and $CO_2$. However, NOx reducing is more difficult on diesel engines because of the high $O_2$ concentration in the exhaust, marking general three way catalytic converter ineffective. Two method available technologies for continuous NOx reduction onboard diesel engines are Urea-SCR and LNT. The implementation of the Urea-SCR systems in design engines have made it possible for 2.5l and over engines to meet the tightened NOx emission standard of Euro-6. In this study, we investigate the characteristics of NOx reduction with respect to engine speed, load, types of catalyst and the $NH_3$/NOx ratio and present the conditions which maximize NOx reduction. Also we provide detailed experimental data on Urea-SCR which can be used for the preparation for standards beyond Euro-6.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.14-15
• /
• 2021

Even though the Al. form system, which was developed to replace the Euro-form, has been used as the slab lower formwork for almost all concrete structures based on the light weight and high conversion rate, the low-noise Drop method has been developed and used in order to overcome the limitations of the Al. Form system such as noise pollution and safety accidents caused by free fall during the demolding. However, as the low-noise drop method is still insufficient, Safety Full Drop Al. Form method is expected to be in the spotlight in the construction market based on its excellent advantages compared to the developed methods. In addition, we plan to conduct research to further contribute to securing the quality of the overall structure through continuous improvement and supplementation by introducing an automation system to the very construction method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.96-103
• /
• 2018

An analysis using a statistical method is generally used to determine the effective temperature based on the temperature design load of a bridge. In this study, the effective temperature was calculated by building an artificial neural network (ANN) capable of improving the statistical method. A Steel box girder bridge specimen was made with a width of 2.0 m, height of 2.0 m, and length of 3.0 m and 0.2 m the upper slab. Twenty one temperature gauges were attached to measure the temperature between 2014 and 2016 for three years. An ANN was learned using the data measured from 2014~2015 and the results were compared with the Euro codes. The error rate between the Euro code and statistical analysis values was analyzed to be 4.1 % for the total measurement point. The ANN was verified and the effective bridge temperatures were calculated using the temperature data measured in 2016. The results revealed an approximate 3.97 % difference from the statistical analysis values. This degree of error is considered to be acceptable in terms of engineering for the analysis of an ANN. An ANN can easily predict the effective temperature of a bridge by knowing the input values of the region's highest temperature, bridge type, and upper asphalt thickness when designing the bridge's temperature loads.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.507-510
• /
• 2005

Euro form which constructs the present RC structures is used widely by the form method of construction of a wall type structure had much consumption of the human power and equipments by the assembly and the demolition, and the complement was required according to demerit with much leakage of cement paste by the form joint, so it developed the new pillar type form system. On the study, in order to consider the modification characteristic by lateral pressure which does the influence most important for the new developed pillar type form system performance, research of a paper manufactured a miniature wall form model, and advanced performance evaluation focusing on lateral pressure. Moreover, lateral pressure evaluation of a new style system was actually gone on through the on-site experiment about a part of wall type srutcture spot for a model experiment and its result on the foundation which is the purpose in evaluating on-site application possibility propriety at the foundation time of wall type concrete structure construction of a pillar type form system.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2022

Objectives This case study aimed to investigate the effect of acupotomy and fascia chuna therapy on talipes cavus-type plantar fasciitis. Methods We classified the foot arch type using a podoscope and estimated the outcome by evaluating the numeric rating scale, pain disability index, and EuroQol-5-dimension measurement. Results After treatment, heel pain decreased and the quality-of-life score improved. Conclusions This study suggests that treatment with acupotomy and muscle energy techniques based on the foot arch type may be effective for plantar fasciitis. A limitation of this study is the small number of cases. Further clinical studies are required.