• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.127-138
• /
• 2018

Spoofing attacks including meaconing can provide a bogus position to a victim GPS receiver, and those attacks are notably difficult to detect at the point of view on the receiver. Several countermeasure techniques have been studied to detect, classify, and cancel the spoofing signals. Based on the countermeasure techniques, we have developed an anti-spoofing equipment that detects and mitigates or eliminates the spoofing signal based on raw measurements. Although many anti-spoofing techniques have been studied in the literatures, the evaluation test system is not deeply studied to evaluate the anti-spoofing equipment, which includes detection, mitigation, and elimination of spoofing signals. Each study only has a specific test method to verify its anti-spoofing technique. In this paper, we propose the performance evaluation test system that includes both spoofing signal injection system and its injection scenario with the constraints of stand-alone anti-spoofing techniques. The spoofing signal injection scenario is designed to drive a victim GPS receiver that moves to a designed position, where the mitigation and elimination based anti-spoofing algorithms can be successively evaluated. We evaluate the developed anti-spoofing equipment and a commercial GPS receiver using our proposed performance evaluation test system. Although the commercial one is affected by the test system and moves to the designed position, the anti-spoofing equipment mitigates and eliminates the injected spoofing signals as planned. We evaluate the performance of anti-spoofing equipment on the position error of the circular error probability, while injecting spoofing signals.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.16-23
• /
• 2018

In order to investigate the ways to enhance the seismic performance of APR1400 seismic fragile equipment by direct design changes, four equipment such as Reactor Vessel Support, Integrated Head Assembly, Remote Shutdown Console, and Pressurizer are reviewed using information of the main dimensions, seismic stress evaluation results, design FRS, etc. in this paper. In addition to the direct reinforcement of equipments, the feasibility of seismic isolation for the safety related cabinet is also investigated and the actual adaption plan of a commercial spring-damper system is briefly reviewed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.4-5
• /
• 2020

Pipe support is a representative structure that supports slab formwork, and it is a representative temporary equipment that has been systematically managed since the 1990s when the domestic temporary equipment performance test system was introduced. Nevertheless, it is also a reality that many of the products in circulation are used products that are reused and do not meet the performance of the initial manufacturing stage. However, if only new products are insisted, it could lead to delays in the process due to an increase in construction costs and difficulties in timely delivery. On the contrary, it is not acceptable for the safety of the construction site to use products of low quality without verification procedures or standards. Therefore, this study attempts to grasp the management system such as safety certification for temporary equipment and the actual condition of quality control to maintain performance, and propose improvement plans.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.69-75
• /
• 2023

In Korea, most nuclear power plants were designed based on the design response spectrum of Regulatory Guide 1.60 of the NRC. However, in the case of earthquakes occurring in the country, the characteristics of seismic motions in Korea and the design response spectrum differed. The seismic motion in Korea had a higher spectral acceleration in the high-frequency range compared to the design response spectrum. The seismic capacity may be reduced when evaluating the seismic performance of the equipment with high-frequency earthquakes compared with what is evaluated by the design response spectrum for the equipment with a high natural frequency. Therefore, EPRI proposed the inelastic energy absorption factor for the equipment anchorage. In this study, the seismic performance of welding anchorage was evaluated by considering domestic seismic characteristics and EPRI's inelastic energy absorption factor. In order to reflect the characteristics of domestic earthquakes, the uniform hazard response spectrum (UHRS) of Uljin was used. Moreover, the seismic performance of the equipment was evaluated with a design response spectrum of R.G.1.60 and a uniform hazard response spectrum (UHRS) as seismic inputs. As a result, it was confirmed that the seismic performance of the weld anchorage could be increased when the inelastic energy absorption factor is used. Also, a comparative analysis was performed on the seismic capacity of the anchorage of equipment by the welding and the extended bolt.

• 한국측량학회지
• /
• 제39권6호
• /
• pp.525-531
• /
• 2021

도시집중화 현상으로 지하공간의 중요성과 활용이 증가하고 있으며 이에 따라 지하공간정보가 구축되고 있다. 지하공간정보는 국민의 생명과 안전에 직접 영향을 미치는 중요한 국가공간정보기반인프라이기 때문에 구축에 사용되는 지하공간 탐사기기의 정확도와 성능을 별도로 관리하고 있다. 이를 위해 공간정보관련 법령에 의거 국가에서는 지하시설물 측량기기 성능검사를 실시하고 있다. 현재 국내 국가공인 지하시설물 탐사장비 검사장으로는 국토지리정보원이 위탁운영을 허가한 성균관대학교 수원캠퍼스에 위치한 지하시설물 탐사장비 검사장이 유일하다. 하지만 지금의 성능검사장은 주로 금속관로를 대상으로 하고 있으며 절대위치측량 검사체계가 없으며 또한 지형측량에 따른 관로의 절대높이값을 확인할 수 있는 체계가 아니다. 이에 본 연구에서는 국내의 지형 및 지질조건과 매설된 지하시설물의 다양한 재료, 형태 등을 고려한 지하공간탐사기기 성능검사 테스트베드 모델을 제시한다. 본 연구를 통해 제시하는 지하정보정밀탐사 실증 테스트베드는 기존의 국내의 시험현장이 지닌 한계를 보완하고 최신 장비 성능 검증까지 가능한 시험장소로서의 활용 방안을 제시하였다.

• The Journal of Korean Physical Therapy
• /
• 제28권2호
• /
• pp.155-163
• /
• 2016

Purpose: Infection management is important for physical therapists in order to protect patients and themselves since they often provide patient care and have physical contact with patients. This study examined the performance of infection control and associated factors among physical therapists. Methods: The study subjects were 174 physical therapists working in the G metropolitan city. The performance of infection control according to general characteristics, job-related characteristics, and infection-related characteristics were compared using t-test and ANOVA. Associations between awareness and performance of infection control were tested by correlation. Finally, multiple linear regression analyses were performed to examine the factors associated with performance of infection control. Results: Overall performance scores for personal and therapy room were $87.47{\pm}11.70$ and $70.08{\pm}13.68$, respectively. Both personal and therapy room infection control were lower for the degree of performance than the degree of awareness. In multiple linear regression analysis, the degree of performance at a personal level was related to current smoking status, type of charge therapy, supply of protection equipment, and awareness of personal infection control. The degree of performance of therapy room was related to injury experience in the workplace, supply of protection equipment, and awareness of therapy room infection control. Conclusion: Performance of therapy room infection control was lower than that of personal infection control. The performance was associated with the supply of protection equipment and awareness. Therefore, the degree of performance for infection control will be increased with proper supply of protection equipment in the hospital and increase the degree of awareness with adequate prevention education.

• 설비공학논문집
• /
• 제25권7호
• /
• pp.392-397
• /
• 2013

To fulfill the demands concerning energy efficiency for zero energy buildings, various technologies of architects and engineers are required. This study aims to estimate the thermal performance of heat source equipment in which part load characteristics are considered in an office building. Overestimation of heat source equipment was reviewed through literature survey, and heating and cooling loads depending on the capacity and division of the equipment were analyzed through a simulation program (DOE-2.1E). The conclusions gained from this study are as follows; 1) The more the division of equipment, the less the heating and cooling energy consumption. 2) When a large item of equipment is divided into two small items of equipment, the optimum application rate showed as 5:5 for chiller, and 7:3 for boiler, respectively.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.516-528
• /
• 2010

The Korean marine equipment industry is, in significant ways, behind the shipbuilding industry. For example, in terms of the number of orders received, the shipbuilding industry has ranked first in the world since 2003. In contrast, the global competitiveness of Korea's marine equipment industry is still relatively weak. This is important not only for the equipment industry, but because these two industries have many links. The structure of this research was firstly, to identify theoretical issues by looking at the characteristics of the marine equipment companies, marketing recognition, uses of marketing, and financial outcomes. Second, the study developed an analytical framework for empirical examination using configuration of each factor. Third, each factor has been analysed empirically. Forth, this study presents the importance of marketing for marine equipment companies within Korea, as well as in a global market. Finally, the study suggests a new marketing strategy for Korea's marine equipment companies to achieve global competitiveness.

• 융합경영연구
• /
• 제10권3호
• /
• pp.1-8
• /
• 2022

Purpose: This study aims to examine the effect of SMEs' R&D competence on management performance. Research design, data, and methodology: The empirical data of this study are derived from 2,375 SMEs that participated in the material, parts, and equipment research and development support project conducted from 2014 to 2018. Among them, 2,230 data were analyzed by classifying them into high-tech and low-tech fields. SPSS 24.0 was used for statistical analysis and correlation analysis and T-TEST were applied. Results: It was analyzed that the level of R&D organization, research personnel, and the number of patent registrations all affected operating profit and sales. In particular, it has been proven that research personnel have a greater impact on management performance among the level of R&D organization, research personnel, and the number of patent registrations. In addition, there was a difference between high-tech and low-tech industries in the impact on operating profit and sales, which are indicators of management performance. Conclusions: This study suggests that R&D competence are strengthened to advance the material, parts, and equipment industries and to promote future growth, while differentiated support is needed according to each company's R&D competence and technology level.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.308-309
• /
• 2018

This paper proposes new D/A(Digital to Analog) Design method for improving accuracy in high-performance test equipment. The proposed new D/A design can improve accuracy of the equipment even with low-resolution D/A converters. The validity of proposed D/A design is verified by analysis and experiment.