• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.26-33
• /
• 2014

The metallurgical and mechanical characteristics, toughness and corrosion resistance of dissimilar welds between super duplex stainless steel UNS S32750 and carbon steel ASTM A516Gr.70 have been evaluated. Three heat inputs of 21.12, 24.00, 26.88kJ/cm were employed to make joints of dissimilar metals with flux cored arc welding(FCAW). Based on microstructural examination, vermicular ferrite was formed in the first layer of weld at low heat input(21.12kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.61 while acicular ferrite was formed in last layer of weld at high heat input(26.88kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.72. Ferrite percentage in dissimilar welds was lowest in the first layer of weld regardless of heat inputs and it gradually increased in the second and third layers of weld. Heat affected zone showed higher hardness than the weld metal although reheated zone showed lower hardness than weld metal due to the formation of secondary austenite. Tensile strengths of dissimilar welds increased with heat input and there was 100MPa difference. The corrosion test by ferric chloride solution showed that carbon steel had poor corrosion resistance and pitting corrosion occurred in the first layer(root pass) of weld due to the presence of reheated zone where secondary austenite was formed. The salt spray test of carbon steel showed that the surface only corroded but the amount of weight loss was extremely low.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.239-246
• /
• 2016

This study aims to analyze region-specific trends in changing greenhouse gas emissions in incineration plants of local government where waste heat generated during incineration are reused for the recent five years (2009 to 2013). The greenhouse gas generated from the incineration plants is largely $CO_2$ with a small amount of $CH_4$ and $N_2O$. Most of the incineration plants operated by local government produce steam with waste heat generated from incineration to produce electricity or reuse it for hot water/heating and resident convenience. And steam in some industrial complexes is supplied to companies who require it for obtaining resources for local government or incineration plants. All incineration plants, research targets of this study, are using LNG or diesel fuel as auxiliary fuel for incinerating wastes and some of the facilities are using LFG(Landfill Gas). The calculation of greenhouse gas generated during waste incineration was according to the Local Government's Greenhouse Emissions Calculation Guideline. As a result of calculation, the total amount of greenhouse gas released from all incineration plants for five years was about $3,174,000tCO_2eq$. To look at it by year, the biggest amount was about $877,000tCO_2eq$ in 2013. To look at it by region, Gyeonggido showed the biggest amount (about $163,000tCO_2eq$ annually) and the greenhouse gas emissions per capita was the highest in Ulsan Metropolitan City(about $154kCO_2eq$ annually). As a result of greenhouse gas emissions calculation, some incineration plants showed more emissions by heat recovery than by incineration, which rather reduced the total amount of greenhouse gas emissions. For more accurate calculation of greenhouse gas emissions in the future, input data management system needs to be improved.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.2
• /
• pp.156-165
• /
• 2017

This study quantitatively assessed the environmental impacts of fuel cell (FC) systems by performing life cycle assessment (LCA) and analyzed their energy efficiencies based on energy return on investment (EROI) and electrical energy stored on investment (ESOI). Molten carbonate fuel cell (MCFC) system and polymer electrolyte membrane fuel cell (PEMFC) system were selected as the fuel cell systems. Five different paths to produce hydrogen ($H_2$) as fuel such as natural gas steam reforming (NGSR), centralized naptha SR (NSR(C)), NSR station (NSR(S)), liquified petroleum gas SR (LPGSR), water electrolysis (WE) were each applied to the FCs. The environmental impacts and the energy efficiencies of the FCs were compared with rechargeable batteries such as $LiFePO_4$ (LFP) and Nickel-metal hydride (Ni-MH). The LCA results show that MCFC_NSR(C) and PEMFC_NSR(C) have the lowest global warming potential (GWP) with 6.23E-02 kg $CO_2$ eq./MJ electricity and 6.84E-02 kg $CO_2$ eq./MJ electricity, respectively. For the impact category of abiotic resource depletion potential (ADP), MCFC_NGSR(S) and PEMFC_NGSR(S) show the lowest impacts of 7.42E-01 g Sb eq./MJ electricity and 7.19E-01 g Sb eq./MJ electricity, respectively. And, the energy efficiencies of the FCs are higher than those of the rechargeable batteries except for the case of hydrogen produced by WE.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.4
• /
• pp.454-465
• /
• 2012

The Korean government decided to reduce 30% of GHG (greenhouse gas) emissions BAU in 2020. Since many efforts to reduce emissions are urgently needed in Korea, the central administrative organization urges local governments to establish their own reduction schemes. Among many GHG emission categories, the emission from mobile source in Gyeonggi Province accounted for 25.3% of total emissions in 2007 and further the emission from road transport sector occupied the most dominant portion in this transportation category. The objective of this study was to compare 3 types of GHG emissions from road transport sector in 31 local cities/counties of Gyeonggi Province, which have been estimated by Tier 1, Tier 2, and Tier 3 methodologies. As results, the GHG emission rates by the Tier 1 and Tier 2 were $19,991kt-CO_2\;Eq/yr$ and $18,511kt-CO_2\;Eq/yr$, respectively. On the other hand, the emission rate by Tier 3 excluding a branch road emission portion was $18,051kt-CO_2\;Eq/yr$. In addition, the total emission rate including all the main and branch road portions in Gyeonggi Province was $24,152kt-CO_2\;Eq/yr$, which was estimated by a new Tier 3 methodology. Based on this study, we could conclude that Tier 3 is a reasonable methodology than Tier 1 or Tier 2. However, more accurate and less uncertain methodology must be developed by expanding traffic survey areas and adopting a suitable model for traffic volumes.

• Journal of Society of Preventive Korean Medicine
• /
• v.2 no.1
• /
• pp.193-208
• /
• 1998

In order to study the effects of emitted-qi therapy, Youngyeonondamtang and Jeokyeonondamtang on the mice bearing ascites cancer caused by Sarcoma 180, the author divided the mice into normal group, control group, EQ group, YO group, JO group, CTX+QE group, CTX+YO group, CTX+JO group, and treated with emitted -qi therapy and administrated Youngyeonondamtang, Jeokyeononondaintang and Cyclophosphamide (CTX). After collecting blood from the mice, measured the values of Prothrombin Time(PT), Partial Thromboplastin Time(PTT), Fibrinogen, White Blood Cell(WBC) and Platelet. The results were as follows, 1. PT was not showed any significant change in ever)r group, being compared with the control group. 2. H increased significantly in YO group, being compared with the control group. 3. Fibrinogen decreased significantly in EQ group, YO group, CTX+EQ group, CTX+YO group, CTX+JO group, being compared with the control group. 4. WBC increased significantly in CTX+EQ group, CTX+YO group, CTX+JO group, being compared with the CTX group. 5. Platelet decreased significantly in every group, being compared with the control group. These results suggest that emitted-qi therapy, Youngyeonondamtang and Jeokyeonondamtang had the effects that could heal the hematopoiesis system in the mice bearing ascites cancer, and especially had the better effects in the case that hematopoiesis system has been impaired by CTX.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.239-246
• /
• 2013

The foot and mouth disease and AI were highly contagious. The virus can be transmitted in a number of ways, including close-contact animal to animal spread, long-distance aerosol spread and fomites, or inanimate objects, typically fodder and motor vehicles. A lot of burial sites were constructed in a short time for preventing the rapid spread of the virus. The carcass burial sites have a risk potential because the sites were constructed without any appropriate and systematic management. It resulted from lacking of time, equipments and man power. The carcass burial sites more than 4,700 constructed in 2011. Approximately 7 million poultry and 3.5 million livestock including head of cattle and swine were buried in farm land. It is time to be concerned if the secondary pollutions occur from the burial sites. The environmental impacts should be analyzed for managing the burial sites effectively and minimizing damages and risks to the environment and human health. This study was to analyze environmental impacts of the process of carcass burial construction using a life cycle assessment methodology. All input data of raw materials and energy usage were collected and the inventory was constructed. The results showed that 1 ton of carcass burial of the environmental impacts were $0.51yr^{-1}$ for ADP, 0.09 kg of 1,4DCB-eq for FAETP, 31.17 kg of $CO_2-eq$ for GWP, 0.04 kg of $C_2H_4-eq$ for POCP, 0.06 kg of $SO_2-eq$ for AP.

• Journal of Nutrition and Health
• /
• v.18 no.3
• /
• pp.194-200
• /
• 1985

The purpose of this study was to investigate sodium intake and protein metabolism for pregnant women in Korea. The relationship between salt consumption and hypertension, electrolyte changes in pregnancy, and the tendency of weight gain of pregnant women were also examined. The dietary survey and twelve or twenty-four hour's urine collection was performed in this study. The subjects were pregnant women who came to gynecology clinic for prenatal care from July to August in 1984. The results were as follows: 1) Intakes of calorie and iron of Korean pregnant women were 2,036 Kcal and 16mg per day per person. The calorie composition consists of 65% carbohydrate, 16% protein, and 19% lipids. The average level of all nutrients was about 87% of Korean Recommended Dietary Allowances. 2) The sodium intakes in pregnant women estimated by dietary survey was 318.6 mEq Na (7,966 mg Na), which is equivalent to 20.2 g NaCl. 3) Daily sodium excretion was 112.5 mEq per liter, that is equal to 147.4 mEq. Potassium excretion was 24.95 mEq per liter and creatinine excretion was 594.0 mg per day. 4) There were statistically significant correlations between sodium intake and the excretions of sodium, potassium and creatinine. The blood pressure was positively correlated with sodium intakes. As sodium and potassium ratio was increased, systolic blood pressure and diastolic blood pressure were also significantly increased 5) Urinary nitrogen and creatinine ratio known to be reliable index for nutritional status of protein was 5.5 : 1. These values were comparable to the values in American pregnant women. 6) The weight gain during the pregnancy was examined. There was little weight gain during the first trimester, because of nausea, vomit and decrease of appetite. The weight gain during the second trimester was 4.9Kg, and 11.1Kg for third trimester.

• Journal of Chest Surgery
• /
• v.15 no.1
• /
• pp.40-45
• /
• 1982

A Clinical study was carried out to observe changes in concentration of serum and urinary potassium during and after open-heart surgery under extracorporeal circulation with Heart-Lung-Machine. The patients studied in the present work included eight cases of congenital heart anomalies and seven cases of acquired valvular diseases of the heart. Blood and urine samples were collected at intervals of 30 minutes during open-heart surgery and at intervals of 8 hours until 48 hours after the operation to determine concentration of serum and urinary potassium. 1.While the concentration of urinary potassium was not changed during the operation, the concentration of urinary potassium was rapidly increased after the operation. Eight hours after the operation, the concentration of urinary potassium was increased to the highest value of 86.97±43.96 mEq/L and was gradually decreased thereafter. The concentration of urinary potassium, however, still remained elevated even 48 hours after the operation, the concentration being greater than preoperative state by 19.90 mEq/L. 2.The concentration of urinary potassium after the operation was higher in the group who went through 90 minutes of extracorporeal circulation [$108.71{\pm}94.71mEq/L$] than in the group who went through 60 minutes of extracorporeal circulation [$86.58{\pm}50.87mEq/L$]. The Increased level of urinary potas-sium observed In the group who went through 90 minutes of extracorporeal circulation continued for longer period of time as compared with that in the group who went through 60 minutes of extracorporeal circulation. 3.The increased level of urinary potassium was observed in the both groups of patients with or without diuretics plus digitalis therapy. However, the increased level of urinary potassium appeared to con-tinue for longer period of time in the group of patients receiving diuretics plus digitalis therapy prior to the operation than in the group of patients receiving no diuretics plus digitalis therapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3237-3243
• /
• 2012

The purpose of this study is to analyze city's built environment that have influence on residents' health in the 40 small and medium-sized cities. In the study, landuse, urban form and facility accessibility of cities and other socio-demographic variables were used as explanatory variables, and a statistical analysis was carried out by applying multi-level analysis. Analysis shows that a high level of population density lower the obesity, and a high level of landuse-mix have a positive effect on EQ-5D & hypertension. In terms of urban form and facility accessibility, residents show a high level of obesity in an environment where roads are closely connected and access to bus service is bad. Finally, as more access to open space have a positive effect on EQ-5D. Therefore, landuse-mix, access to public transportation and open space should be used for planning factors to make a health improvement plan in cities.