• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.290-297
• /
• 2004

The color enhancement of natural ruby produced from Mong Hsu were carried out by the heat treatment using gas diffusion. The natural ruby in this paper has a colored patch of which the color ranges from blue to a color close to black. The most favorable heat treatment conditions were as follows; range of temperature $1400~1600^{\circ}C$, duration 12 hrs, $O_2$ atmosphere. The color tone of ruby obtained under the optimum conditions was overall clear red by partial removal of colored patch. From EPMA results, part of blue or black colored patch within ruby were found to occur by charge transfer between $Fe^{2+}{\;}and{\;}Ti^{4+}$ . These results are consistent with the XRF that contents of $Fe(Fe^{2+}{\;}or{\;}Fe^{3+}$) and $Ti^{4+}$ ion to cause a blue or black colored patch after heat treatment became slightly less than with non-treated ruby. The silk formed on the surface of ruby heat treated for 12 hrs at $1700^{\circ}C$ were found to be generated by re-crystallization of rutile $TiO_2$ by XPS analysis.

• Analytical Science and Technology
• /
• v.14 no.4
• /
• pp.364-370
• /
• 2001

The corrosion behaviors of reinforcing steels were investigated under chloride ion contained in cement mortar including gypsum by the implementation of half cell potential measurement, EPMA analysis, exterior features, weight loss and extraction experiment. The acceleration test equipment accelerated corrosion of mild steel bar in a short period of time. From observing the exterior features and weight loss, we could evaluate the measure of corrosion. Also, from the extraction experiment of ${SO_4}^{2-}$ with $Cl^-$ ions contained in the ceramic mortar, we concluded that ${SO_4}^{2-}$ ion affected more on the corrosion mechanism in comparison to pH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.238-238
• /
• 2012

현재 국내 주얼리(gold alloy) 제품을 생산함에 있어 주조 방법은 크게 대기 중 주조(흡입주조) 방법과 진공주조 방법으로 나누어진다. 국내 주얼리 제조업체의 약 90%이상이 대기 중에서 주조하는 흡입주조방법을 통해 제품을 제작하고 있고, 국외의 경우, 대다수 진공주조방법을 통해 제품을 제작하고 있다. 본 연구에서는 주얼리 제품을 생산할 때 사용되는 합금재료(master alloy)가 동일한 조건에서 주조방법을 달리하여 각각 24개씩 총 48개의 14K yellow gold alloy 제품을 제작한 후 열처리를 통해 각각의 기계적, 물리적 특성분석을 비교 분석하였다. EPMA (Electron Probe Micro Analysis)분석을 통해 합금재료 및 제품의 구성성분을 조사하였고, ICP-MS (Inductively Coupled Plasma Mass Spectroscopy)를 사용하여 성분에 대한 정량분석을 실시하였다. 용체화처리(solid solution treatment)는 $700^{\circ}C$, 30분의 조건으로 실시하였고, 시효경화처리(age-hardening)는 $200{\sim}300^{\circ}C$의 온도범위에서 $50^{\circ}C$ 간격으로 실시하였다. 열처리 전과 후 시료의 grain 들의 배열 및 size 변화를 관찰하기 위해 식각 후 OM (optical microscope) 및 SEM (Scanning Electron Microscope)를 통해 분석하였다. 열처리 전 제품의 경도측정결과 대기 중 흡입주조방법 및 진공 주조방법을 통해 제작된 제품이 각각 119 Hv, 126 Hv로 나타났고, 용체화 처리 후 98 Hv, 92 Hv로 감소하였다. 시효경화 처리 후의 경도변화는 대기 중 흡입주조 및 진공주조방법을 통해 제작된 제품 모두 $270^{\circ}C$에서 각각 154 HV, 166 HV로 가장 높은 경도 값을 나타내었고, $270^{\circ}C$ 이상에서는 과시효(over aging)현상으로 인해 경도 값이 다시 감소하는 경향을 나타내었다. EPMA mapping 분석을 통해 주조방법에 따라 각각 제품의 구성성분분포도를 확인하였다. 이를 통해 열처리 전 다소 불균일하게 분포되었던 성분들이 열처리 후 균일해짐을 확인할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.92-95
• /
• 2004

Using the Micro-Pulling Down (${\mu}$-PD), $MnO_2$ and $Tb_4O_7$ co-doped crack-free stoichiometric $LiNbO_3$ single crystals were grown in 1.0 mm diameter and 25-30 mm length for c-axis. The homogeneous distributions of $MnO_2$ and $Tb_4O_7$ concentration were confirmed by the Electron Probe Microanalysis (EPMA). Also, the infrared OH absorption band of the single crystals observed by using a Fourier Transform-Infrared Spectrophotometer (FT-IR) at room temperature and the photoluminescence spectra was measured with respect to the $MnO_2$ and $Tb_4O_7$ doping.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.312-319
• /
• 2013

The purpose of this study was to evaluate the efficacy of gargle and toothpaste containing low concentration with sodium fluoride on the remineralization through the surface microhardness and mineral content in enamel. After 4 weeks-application, the enamel surface was measured using microhardness tester and the calcium (Ca) and phosphorous (P) concentration of mineral content by electron probe microanalyzer (EPMA) analysis. By combining fluoridated gargle with toothpaste, a remineralized enamel resulted in significantly significant differences among the four groups (p<0.05). The Ca change treated with 0.23% fluoridated toothpaste and 0.02% fluoridated gargle with 0.23% toothpaste demonstrated the highest among the other groups. In conclusion. the fluoridated gargle with toothpaste by low concentration showed a significantly greatest synergistic effect on remineralization of the enamel than the other groups.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.4
• /
• pp.415-425
• /
• 2003

A single particle analysis, called low-Z electron probe X-ray microanalysis was applied to characterize the atmospheric aerosols collected during Asian Dust storm events in the year of 2000 and 2001. Most frequently encountered chemical species were the soil-originated species such as aluminosilicates, silicon dioxide, and calcium carbonate. Also various species such as carbon -rich, organics, sea salts, and some reacted calcium carbonate were identified. The observation of internally mixed particles oi calcium carbonate, calcium nitrate and/or calcium sulfate shows the occurrence of the heterogeneous reaction between Asian Dust particles and NO$_{x}$ and/or SO$_{x}$ species in the atmosphere.ere.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.433-437
• /
• 2006

Pt/Nafion self-humidifying membranes for Polymer Electrolyte Membrane Fuel Cell(PEMFC) were synthesized via supercritical-impregnation methods. The Nafion 112 membranes were impregnated with Pt(II)$(acetylacetonate)_2$ from a supercritical carbon dioxide $(scCO_2)$ solution at $80^{\circ}C$ and 30MPa. After the impregnation, the pressure decreased slowly by releasing $CO_2$. And the Pt-impregnated Nafion membrane was converted Pt deposited Nafion membrane by reducing agent, sodium borohydride $(NaBH_4)$ with various concentrations under $50^{\circ}C$ and 2 hours. The prepared Pt-impregnated Nafion (Pt/Nafion) composite membrane were investigated by Electron Prove Micro analysis (EPMA) and X-rat Diffraction analysis (XRD) which showed distribution of Pt particle and Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) a which revealed morphology of surface of Pt/Nafion composite membrane. The performance of the Pt/Nafion 112 membranes was examined in PEMFC as aself-humidifyin membranes using purpose-built equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.109-117
• /
• 1992

Mixing of ceramic-binder system was investigated experimentally and theoretically for application to Ceramic Injection Molding. Polypropylene, stearic acid, and paraffin wax were selected as the binder system, and silicon nitride fine powders were selected as the ceramic material. Single screw ectruder was employed as the mixing equipment. Theoretical analysis was performed to investigate the mixedness of mixture quantitatively. The analysis predicted average residence time average total strain, and average shear stress as a function of screw speed for mixtures of different volume fraction. Qualitative mixedness of mixture and characteristics of mixing were investigated by using SEM and EPMA. In addition, rheological properties of the mixture were investigated by using a capillary rheometer to examine possibility of injection molding.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1040-1046
• /
• 1996

Low voltage phosphor, ZnGa$_{2}$O$_{4}$:Mn, was synthesized and sintered at the high temperature in Ar or vacuum. By XRD analysis, it is confirmed that poly crystalline ZnGa$_{2}$O$_{4}$:Mn solid solution was formed. From EPMA analysis of the samples prepared in Ar and vacuum, the change of oxygen content was investigated and as a result, it was observed that the oxygen amounts were reduced in ZnGa$_{2}$O$_{4}$:Mn prepared in vacuum. It caused the deficiency in oxygen amounts in the phosphor and then consequently, it results in the formation of the energy level near 513 nm. It contributes to the improvement of the brightness of ZnGa$_{2}$O$_{4}$:Mn.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.110-110
• /
• 2009

본 연구에서는 전산유체역학적 방법을 이용하여 레이저-GMA 하이브리드 용접에서 용융풀 거동에 대한 3차원 과도해석을 수행하였다. 철강재의 주요 합금원소 중 하나인 크롬의 용융풀에서의 거동을 구현하기 위해 크롬에 대해 추가적인 보전 방정식을 도입하였다. 이를 이용하여 합금원소 분포에 대한 용접 변수별 영향을 해석적으로 분석하였으며 이를 EPMA(Electron Probe Micro Analyzer)를 통해 분석한 시험결과와도 비교하였다. 결과적으로 용접변수 중 선행 조건이 합금원소 분포에 구별할만한 영향을 미침을 알 수 있었고 이는 용융풀의 거동을 지배하는 주요 유동 패턴의 상이함에 기인한 것으로 보여진다.