• The Korean Journal of Pesticide Science
• /
• v.9 no.2
• /
• pp.159-165
• /
• 2005

A sensitive derivatization method by using the TFE/TFAA as derivative reagent is proposed for the determination of acidic herbicides in water, by using this method, method detection limits are improved by 10 times and sample volumes are decreased by 5 times compared with other methods such as U.S. EPA and SPEED 98. And also, in order to suggest higher creditable standard operating procedure (SOP), intra- and inter-lab validation test carried out by four laboratories include our lab. The results of intra and inter-lab validations in same experimental conditions show good linearity in given range of concentrations as a $0.1{\sim}10.0$ ng/ml, and range of accuracies and precisions show $-20.5{\sim}12.2$ bias%, $0.55{\sim}24.48%$ (for intra-lab validation) and $-6.66{\sim}0.80 bias%$, $1.92{\sim}13.86%$ (for inter-lab validation), respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2011

Based on the results of Part 1 of our two-parts paper, the possibility on field applicability of CMDS(Coal Mine Drainage Sludge) mixed with bentonite and cement as a liner in landfill sites was investigated. The optimum moisture content that met the landfill liner condition was obtained when the ratio of CMDS: bentonite: cement was 1: 0.5: 0.3 in a lab-scale. The relative compaction was measured in 90.1%, which results for construction field have been generally acceptable. In this study, a large-scale Lysimeter($1.0m{\times}1.5m{\times}2.0m$) was used to simulate the effects of the layer on the freeze/thaw by -20 average temperature. The mixture after freezing/thawing showed compressive strength more than $5kg/cm^2$, which was satisfied with EPA standards. Initial permeability of CMDS was $7.10{\times}10^{-7}cm/s$ and permeability its mixture after freezing/thawing was increased to $9.80{\times}10^{-7}cm/s$. The change of temperature in the layers rises and falls with linear and temperature gradient keep maintain the present state. Moisture contents in the layers have not been radically changed. Through the leaching test determined by KSLT method, it was found that heavy metals excluding Zn and Ni were not leached out or leached out less than the standards during 7 cycles of freezing/thawing process. Since it shows the increased permeability about 1.5 times and slight change in moisture content, but it was satisfied with EPA standar through 7 cycles of freezing/thawing process, this mixture can be applied as a liner in landfill final cover system.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.708-716
• /
• 2013

Changes in the proximate composition, lipid classes, and fatty acids were studied in chub mackerel Scomber japonicus and Japanese jack mackerel Trachurus japonicus muscles cooked using a frying pan, oven, and microwave oven. The moisture content was high in the raw samples (chub mackerel 65.5%, Japanese jack mackerel 60.5%) and decreased with cooking, especially in the frying pan method (chub mackerel 49.2%, Japanese jack mackerel 49.8%). In contrast, the protein, lipid and ash contents increased significantly with cooking in chub mackerel muscle (P<0.05). However, the lipid content of Japanese jack mackerel muscle showed no significant difference between the samples using the three cooking methods and the raw sample. The dripped lipid contents from the cooked muscles showed the highest levels in the frying pan samples and the lowest levels in the microwave oven samples. The percentage of non-polar lipid (NL) in the total lipid content was over 95% in the muscle lipids (10.43-21.86 g/100 g sample). Prominent fatty acids were 16:0, 18:1n-9, 22:6n-3 (docosahexaenoic acid, DHA), 16:1n-7 and 20:5n-3 (eicosapentaenoic acid, EPA) in both fish muscles and dripped lipids. There was no change in the EPA level in any of the fish muscles, by any cooking method. The percentage of DHA in the muscle of chub mackerel showed the lowest level in the frying pan sample and the highest level in the microwave oven and raw samples, and an intermediate level in the oven sample. However, the percentage of DHA in the Japanese jack mackerel muscle was not significantly different between the various cooking methods. From these results, the microwave oven and oven cooking methods showed relatively low levels of dripped lipid content and loss of n-3 PUFA compared with the frying pan cooking method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.223-232
• /
• 1997

The accuracy and precision of a modified method of NIOSH Method 7600 and EPA method 218.6 was determined for analyzing hexavalent chromium, Cr(VI), collected on PVC filter from workplace air. The method was designed to extract from Cr(VI) on PVC filter with a alkali solution, 2% NaOH/3% $Na_2CO_3$, and to analyze it using ion chromatography/visible absorbance detection(IC/VAD). The results and conclusion are as the following. 1. The peak of Cr(VI) was separated sharply on chromatogram and was linearly related with Cr(VI) concentration in sloution. The correlation coefficient was 0.9999 in a calibration curve. The limit of detection was 0.25 $0.25{\mu}g/sample$. 2. The accuracy(% recovery) was 93.3% in a set of sample($9-50{\mu}g$) stored for a day, and 100.1%($10-60{\mu}g$) in another set of samples stored for 2 hours. It is assumed that the difference in recovery by storage time was due to reduction of Cr(VI) to Cr(III). 3. The precision(coefficient of variation, CV) of the method was 0.015 in spiked samples with Cr(VI) standard solution, and 0.010 in spiked samples with plating solution from a chrome electroplating factory. The overall CV in all types of samples was 0.0013. 4. The Cr(VI) was stable in 2% NaOH/3% $Na_2CO_3$ at least for 10 hours. In conclusion, the IC/VAD method is appropriate for determining low-level Cr(VI) in workplace air containing various interferences.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.13-22
• /
• 2005

The elution patterns of seventeen 2,3,7,8-substituted PCDDs/Fs and 12 dioxin-like PCBs were studied by both manual open columns and automatic parallel LC columns in cleanup procedure. PCDDs/Fs and non-ortho-PCBs from other mono-ortho-PCBs were separated on automatic LC column, whereas they were not separated on an open manual column. The elution study on two cleanup methods was carried out using the PAR solution of unlabeled congeners and checked the recovery of each congener. Total recoveries of cleanup fractionation were ranged between 61.9 ~ 96.0% for PCDDs/Fs and 70.4 ~ 79.0% for PCBs by manual open columns and 71.8 ~ 104.5% for PCDDs/Fs and 61.3-120.3% for PCBs by automatic parallel LC columns, respectively. Unfortunately, #169-HxCB and 1,2,3,7,8-PeCDD were not separated on DB-5MS capillary column. The ions of 1,2,3,7,8-PeCDD were selected at M/M+2 instead of M+2/M+4 suggested by EPA method 1613. It is possible to discriminate 1,2,3,7,8-PeCDD and PCB #169 in HRGC/HRMS analysis.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1049-1055
• /
• 2016

This study aimed to investigate an effective method of purifying oil from hydrolysates of mackerel by-products. A hydrolyzed sample was separated into lipids and other material. After degumming of crude lipids with 6% citric acid solution, the phosphorous content (45 mg/kg) decreased to 5.8 mg/kg, and the acid value (18.03 mg /g) decreased to 1.19 mg KOH/g. Following the addition of 8% sodium hydroxide solution, the peroxide value (30.25 meq/kg) dropped to 3.18 meq/kg, and the chromaticity decreased from 0.488 nm to 0.057 nm. Bleaching was performed by adding 5% activated charcoal for 60℃ for 20 min under vacuum conditions. After bleaching, the acid value was 0.17 mg KOH/g, and the peroxide value was 1.21 meq/kg, but the chromaticity was not changed remarkably (0.062 nm). Crystallization was conducted to increase the amount of unsaturated fatty acids. After crystallization, the total amount of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) was 228.83 mg/g. The results suggest that the product can be used as an omega-3 fatty acid resource for functional food.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.745-750
• /
• 2014

This study investigated the effects of squid Todarodes pacificus liver oil on the serum lipids and adipose tissue weight of rats. The rats in the soybean oil (SO) group received a basic diet prepared according to the recommendations of the American Institute of Nutrition (AIN-93G), with 7% SO as lipid source. The rats in the Patagonian toothfish Dissostichus eleginoides muscle oil (PTFO) group received 5% PTFO and 2% SO as the lipid source, while the rats in the eco-friendly squid liver oil (EFSO) group received 5% EFSO and 2% SO. EFSO was prepared according to the method outlined in the author's patent. PTFO was extracted from muscle using a physical method in the author's laboratory. The prominent polyunsaturated fatty acids in the dietary oils were 18:2n-6 (54.3%) and 18:3n-3 (5.64%) in SO, DHA (6.77%) and EPA (3.61%) in PTFO, and DHA (26.2%) and EPA (9.94%) in EFSO. After feeding for 4 weeks, the serum lipid levels (e.g., triglyceride, total cholesterol, and low-density lipoprotein cholesterol) of the rats in the EFSO group were significantly reduced as compared with those in the SO group (P<0.05); those of the rats in the PTFO group were also reduced, albeit not significantly, compared with the SO group. On the other hand, the total white adipose tissue (visceral, epididymal, and perirenal) weight was significantly reduced in the EFSO and PTFO groups compared to the SO group. These results demonstrate that EFSO is an effective lipid modifying agent in rat blood, and that EFSO and PTFO have greater anti-obesity effects than SO.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.39-42
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used to the chemical/pharmaceutical industries, the semiconductor/LCD manufacturing processes, etc. with the high purity chemicals as working fluid. EPA stated that 60% of all fugitive emissions come from the valve stem packing in a typical petroleum or chemical processing plant. They monitor regulated components for leaks and maintain seal performance at acceptable levels. Korean industrial standards only deals with the bubble test for in-line leakage of valves, which has the detectable leak rate of $10^{-4}$ [$mbar{\cdot}L{\cdot}s^{-1}$], therefore, it is not sufficient to check fugitive emissions. In this study, we conducted Helium leak detection from a PFA lined ball valve and evaluated fugitive emissions according to ISO 15848-1, which has the detectable leak rate of $10^{-9}$ [$mbar{\cdot}L{\cdot}s^{-1}$], for manufacturing the high-reliable PFA lined ball valves against fugitive emissions.

• Journal of People, Plants, and Environment
• /
• v.24 no.6
• /
• pp.585-593
• /
• 2021

Background and objective: Illegal open-air incineration, which is criticized as a leading source of air pollutants among agricultural activities, currently requires constant effort and attention. Countries around the world have been undertaking studies on the emission of heavy metal substances in fine dust discharged during the incineration process. A precise analytical method is required to examine the harmful effects of particulate pollutants on the human body. Methods: In order to simulate open-air incineration, the infrastructure needed for incineration tests complying with the United States Environmental Protection Agency (EPA) Method 5G was built, and a large-area analysis was conducted on particulate pollutants through automated scanning electron microscopy (SEM)-energy-dispersive X-ray spectroscopy (EDS). For the test specimen, high-density polyethylene (HDPE) waste collected by the DangJin Office located in Choongcheongnam-do was used. To increase the identifiability of the analyzed particles, the incineration experiment was conducted in an incinerator three times after dividing the film waste into 200 g specimens. Results: Among the metal particulate matters detected in the HDPE waste incineration test, transition metals included C (20.8-37.1 wt%) and O (33.7-37.9 wt%). As for other chemical matters, the analysis showed that metal particulate matters such as metalloids, alkali metals, alkaline earth metals, and transition metals reacted to C and C-O. Si, a representative metalloid, was detected at 14.8-20.8 wt%, showing the highest weight ratio except for C and O. Conclusion: In this study, the detection of metal chemicals in incinerated particulate matters was effectively confirmed through SEM-EDS. The results of this study verified that HDPE waste adsorbs metal chemicals originating from soil due to its own properties and deterioration, and that when incinerated, it emits particulate matters containing transition metals and other metals that contribute to the excessive production and reduction of reactive oxygen species.