• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 추계학술대회논문집
• /
• pp.21-25
• /
• 1996

The Electomyographic (EMG) signals of flexor-extensor muscle pairs were investigated to identify the neural excitation pattern of low-back pain (LBP) patients during a repetitive bending motion. New parameters and EMG normalization technique were developed to quantitatively represent the difference of temporal EMG patterns between ten healthy subjects and ten LBP patients. Flexor-extensor muscle pairs such as rectus abdominis(RA)-erector spinae (ES at LS), external oblique(EO)-internal oblique(IO), rectus femois (quadriceps: QUD)-biceps femoris(hamstrings:HAM), and tibialis anterior(TA)-gastrocnemius(GAS) pairs of muscles were selected in this study. Results indicated that the temporal EMG pattern such as the peak timing difference of QUD-HAM muscle pair and the duration of coexcitation of ES-RA muscle pair showed a statistically isgnificant difference between healthy subjects and LBP patients. These results indicated that the new technique and parameters could be used as a diagnostic tool especially for LBP patients with soft tissue injuries that are rarely dentified by traditional imaging techniques such as X-ray, CT scan or MRI. Improtantly, the new EMG technique did not require the maximal volutary contraction(MVC) measure for normalization that helped patients minimize the pain experience during and after the session. Further study needs to be made to validate and refine this method for clinical application.

• 대한족부족관절학회지
• /
• 제19권4호
• /
• pp.165-170
• /
• 2015

Purpose: The purpose of this study is to analyze the measurement differences of simple radiographs according to radiation projection angle using a phantom and to propose methods for objective analysis of simple radiographs. Materials and Methods: We took simple radiographs with different projection angles using a C-arm image intensifier and measured five parameters of the foot on the simple radiographic images. Five parameters include lateral tibiocalcaneal angle, lateral talocalcaneal angle, naviculocuboid overlap, lateral talo-first metatarsal angle, and lateral calcaneo-first metatarsal angle. Intraobserver and interobserver reliability were verified, and then intraclass correlations of parameters were analyzed. Results: Radiographic parameters of the foot showed high intraobserver and interobserver reliability. Lateral tibiocalcaneal angle has a strong negative linear relationship with rotation and a moderate negative linear relationship with tilt. Lateral talocalcaneal angle has a moderate positive linear relationship with rotation and a strong positive linear relationship with tilt. Naviculocuboid overlap has a strong positive linear relationship with rotation and a moderate positive linear relationship with tilt. Lateral talo-first metatarsal angle does not have a linear relationship with rotation and a moderate negative linear relationship with tilt. Lateral calcaneo-first metatarsal angle has a moderate positive linear relationship with rotation and tilt. Conclusion: More precise evaluation of the foot with a simple radiograph can be performed by understanding the changes of radiographic parameters according to radiation projection angle.

• 대한원격탐사학회지
• /
• 제23권6호
• /
• pp.521-528
• /
• 2007

본 논문에서는 대상지역에 대한 영상을 다양한 가중치의 조합의 경우를 고려하여 객체 단위로 분할하게 되며 분할된 객체에 대하여 상호관계를 분석하여 수치적으로 표현하였다. 또한 최종적인 객체 기반영상분류에서 높은 정확도를 확보할 수 있는 가중치의 조합을 산정하였다. 연구에 사용된 영상은 Landsat-7/ETM 영상으로 대상 지역의 면적은 $11{\times}14$ Km이며 밴드 2, 3, 4의 조합을 사용하였다. 객체 간 계산은 Moran's I와 객체 내부 분산(Intrasegment Variance)을 이용하였다. 대상지역에 대하여 총 75개의 가중치 조합을 사용하여 75개의 객체 분할 영상을 생성하였다. 객체 분할 영상 중에 최종적인 영상 분류 시 높은 정확도가 예상되는 가중치 조합, 중간 정도 정확도가 예상되는 가중치 조합 그리고 낮은 정도 정확도가 예상되는 가중치 조합을 7개 선택하여 최종적인 객체기반 영상분류를 시행하고 그 정확도를 비교하였다. 정확도의 비교 결과, 가장 높은 정확도가 예상되는 가중치 조합의 객체 분할 영상의 경우 객체 기반 영상 분류 시 85% 이상의 정확도를 나타내었으며 반대로 낮은 경우는 분류 시 50% 정도의 분류 정확도를 나타내었다.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.484-490
• /
• 2018

Background: The use of three-dimensional multi-segment foot models (3D MFMs) is increasing since they have superior ability to illustrate the effect of foot and ankle pathologies on intersegmental motion of the foot compared to single-segment foot model gait analysis. However, validation of the repeatability of the 3D MFMs is important for their clinical use. Although many MFMs have been validated in normal adults, research on MFM repeatability in children is lacking. The purpose of this study is to validate the intrasession, intersession, and interrater repeatability of an MFM with a 15-marker set (DuPont foot model) in healthy children. Methods: The study included 20 feet of 20 healthy children (10 boys and 10 girls). We divided the participants into two groups of 10 each. One group was tested by the same operator in each test (intersession analysis), while the other group was tested by a different operator in each test (interrater analysis). The multiple correlation coefficient (CMC) and intraclass correlation coefficient (ICC) were calculated to assess repeatability. The difference between the two sessions of each group was assessed at each time point of gait cycle. Results: The intrasession CMC and ICC values of all parameters showed excellent or very good repeatability. The intersession CMC of many parameters showed good or better repeatability. Interrater CMC and ICC values were generally lower for all parameters than intrasession and intersession. The mean gaps of all parameters were generally similar to those of the previous study. Conclusions: We demonstrated that 3D MFM using a 15-marker set had high intrasession, intersession, and interrater repeatability in the assessment of foot motion in healthy children but recommend some caution in interpreting the hindfoot parameters.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1347-1353
• /
• 2004

With respect to the researches of the optical flying head(OFH) , the head-gimbal assembly should be analyzed to guarantee the stable fabrication and the characteristics of shock resistance. The suitable design is proved through the Probabilistic analysis of the design parameters and material properties of the model. Probabilistic analysis is a technique that be used to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can find out how much the results of a finite elements analysis are affected by uncertainties in the model. Another factor is analysis of the dynamic shock analysis. For the mobile application, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes in contact with outer shock disturbance. the system gets critical damage in head-gimbal assembly or disk. This paper describes probabilistic and dynamic shock analysis of head-gimbal assembly in micro MO drives using OFH slider.

• 한국측량학회지
• /
• 제32권3호
• /
• pp.217-223
• /
• 2014

With precise sensor position, attitude element, and imaging resolution, a simulated geospatial image can be generated. In this study, a satellite image is simulated using SPOT ortho-image and global elevation data, and the geometric similarity between original and simulated images is analyzed. Using a SPOT panchromatic image and high-density elevation data from a 1/5K digital topographic map data an ortho-image with 10-meter resolution was produced. The simulated image was then generated by exterior orientation parameters and global elevation data (SRTM1, GDEM2). Experimental results showed that (1) the agreement of the image simulation between pixel location from the SRTM1/GDEM2 and high-resolution elevation data is above 99% within one pixel; (2) SRTM1 is closer than GDEM2 to high-resolution elevation data; (3) the location of error occurrence is caused by the elevation difference of topographical objects between high-density elevation data generated from the Digital Terrain Model (DTM) and Digital Surface Model (DSM)-based global elevation data. Error occurrences were typically found at river boundaries, in urban areas, and in forests. In conclusion, this study showed that global elevation data are of practical use in generating simulated images with 10-meter resolution.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.462-468
• /
• 2017

KYP 모델은 화약의 폭굉 반응속도를 기술하는 압력기반모델이다. 본 연구에서는 PETN 기반 복합 화약(PBXN-301)의 KYP 모델 및 JWL EOS의 파라미터를 결정하였다. 크기효과를 얻기 위하여 반응 막대 시험을 수행하였고 2차원 하이드로다이나믹 해석 결과와 비교하였다. 해석 결과, 정성적으로 얻어진 LLNL의 구성방정식보다 KYP 모델링을 통해 도출된 파라미터가 PBXN-301 화약의 역반지름에 따른 폭굉파속을 잘 예측하는 것으로 나타났다.

• KSBB Journal
• /
• 제11권4호
• /
• pp.405-410
• /
• 1996

내부 순환 장치를 대규모화함에 따른 혼합특성의 변화를 추적자의 분산실험을 통하여 고찰하였다. 분산특성을 나타내는 무차원수 Bodenstein 수를 5L, 5 50L, 500L 규모의 세 장치에서 공탑기체속도, 액체 순환속도, 포기관의 높이에 대한 직경비의 변화, 빛 반응관의 직경에 대한 포기관의 직경비의 영향에 따 나타내었다. 5L 규모의 장치에서 Bo 수는 공탑 기체속도의 증가에 따라 증가하다 가스 해리 현상의 발생으로 증가폭이 둔해지는 경향을 나타내었으며, 5 50L와 500L 장치에서는 공탑기체속도의 증가에 따라 Eo 수가 감소하였는데, 이는 역혼합의 영향이 크게 나타난 것으로 판단되었다. 또한, 500L 규모 장 치에서 Eo 수의 변화는 50L 장치에서 보다 낮은 공 탑기체속도하에서 변화하는 것으로 보아 대규모화에 따라 흔합이 더욱 빨리 발생함을 알 수 있었다. 차원 해석을 통하여 각 변수틀간의 상관관계를 구하였고, 회귀분석을 통하여 다음과 같은 결과식을 구하였다.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.339-352
• /
• 2022

Studying slope stability is an important branch of civil engineering. In this way, engineers have employed machine learning models, due to their high efficiency in complex calculations. This paper examines the robustness of various novel optimization schemes, namely equilibrium optimizer (EO), Harris hawks optimization (HHO), water cycle algorithm (WCA), biogeography-based optimization (BBO), dragonfly algorithm (DA), grey wolf optimization (GWO), and teaching learning-based optimization (TLBO) for enhancing the performance of adaptive neuro-fuzzy inference system (ANFIS) in slope stability prediction. The hybrid models estimate the factor of safety (F_S) of a cohesive soil-footing system. The role of these algorithms lies in finding the optimal parameters of the membership function in the fuzzy system. By examining the convergence proceeding of the proposed hybrids, the best population sizes are selected, and the corresponding results are compared to the typical ANFIS. Accuracy assessments via root mean square error, mean absolute error, mean absolute percentage error, and Pearson correlation coefficient showed that all models can reliably understand and reproduce the F_S behavior. Moreover, applying the WCA, EO, GWO, and TLBO resulted in reducing both learning and prediction error of the ANFIS. Also, an efficiency comparison demonstrated the WCA-ANFIS as the most accurate hybrid, while the GWO-ANFIS was the fastest promising model. Overall, the findings of this research professed the suitability of improved intelligent models for practical slope stability evaluations.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.579-587
• /
• 2005

본 연구에서는 Poly(4-vinylphenol)(PVPh)/acetone 및 PVPh/methyl ethyl ketone 용액계의 액-액 상분리 실험을 TOA(thermal optical analysis)방법으로 실행하였다. 실험을 수행한 PVPh/acetone 및 PVPh/MEK 용액계의 상분리 거동은 두 용액 계 모두 LCST 형태의 거동을 보였고 상분리 온도는 고분자의 분자량이 증가함에 따라 낮아지는 경향을 보였다. 또한, 용매의 분자량이 상분리에 미치는 영향으로는 용매의 분자량이 큰 PVPh/MEK 용액의 상분리 온도가 PVPh/acetone 용액의 경우보다 높은 온도 영역에 분포하는 경향을 보였다. 실험에서 측정된 상분리 데이터를 PVPh와 ketone 분자간의 교차회합과 PVPh의 자기회합을 고려한 PC-SAFT 상태방정식 관계를 이용하여 액-액 상평형 관점에서 검토하여 보았다. PVPh의 PC-SAFT 상태방정식 파라미터와 교차회합 파라미터는 PVPh의 용융상태의 밀도 데이터와 PVPh/acetone 용액의 기-액 평형 데이터를 동시에 고려하여 추산하였다. 추산된 파라미터를 이용하여 각 고분자 용액계의 spinodal curve와 binodal curve를 계산하였으며, 계산된 binodal curve는 실험에서 측정된 상분리 온도와 일치하는 경향을 보였다.