• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.625-634
• /
• 2014

Tactical networks is being operated in configuration that consisting of a variety of characteristics communication equipments and heterogeneous networks. In this configurations, end-to-end communication can be achieved using interworking gateway for converting the data format of the network and using encryption algorithm of the networks. The use of mechanism results in a problem that secure data cannot be transferred directly, reprocessing and processing delay of communication in heterogeneous tactical networks. That is, for encoding and decoding of data, the decryption of encrypted data and re-encryption processing must be required at the gateway between different networks. In this paper proposes to mechanism for end-to-end secure communication in heterogeneous tactical networks. Using the proposed method, end-to-end secure communication between heterogeneous tactical networks(PSTN-UHF networks) which removes the necessity of a gateway for converting data into data formats suitable for network to remove a transmission delay factor and enable real-time voice and data communication and achieve end-to-end security for heterogeneous tactical networks. we propose a novel mechanism for end-to-end secure communication over PSTN and UHF networks and evaluate against the performance of conventional mechanism. Our proposal is confirmed removal of security vulnerabilities, end-to-end secure communication in heterogeneous tactical networks.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.189-200
• /
• 1999

For admitting a hard real-time connection to an ATM network, it is required that the end-새둥 delays of cells belong-ing to the connection meet their deadlines without violating the guarantees already provided to the currently active connections. There are two kinds of methods to analyze the end-to-end delay in an ATM network. A decomposed method analyzes the worst case delay for each switch and then computes the total delay as the sum of the delays at individual switches. On the other hand, an integrated method analyzes all the switches involved in an inte-grated manner and derives the total delay directly. In this paper, we present an efficient and effecitive integrated method to compute the end-to-end delay. We evaluate the network performance under different system parameters and we compare the performance of the proposed method with the conventional decomposed and other integrated methods [1], [3], [5]-[9].

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.17-21
• /
• 2011

Vehicle safety device such as active headrest and rear detection system has been developing as people are interested about rear end collision more than head on or than front. However, there is no any standard or criterion in order to evaluate vehicle safety device for rear end collision. Also there is no test protocol about rear end collision in vehicle experiment. Therefore, this research developed scenario for experiment about rear end collision in vehicle experiment. Also this research evaluated dangerousness about vehicle test and fitness about re-enacting rear end collision using scenario developed using commercial software (PC-Crash) which can re-enact vehicle collision in virtual vehicle experiment. Scenario developed according to statistics from National Highway Traffic Safety Administration and German In-Depth Accident Study. Scenario has twelve cases which composed of Re-LVS (Rear end Leading Vehicle Stop), Re-LVM (Rear end Lead Vehicle Moving) and scenario for evaluation about malfunction of active headrest.

• Journal of Hospice and Palliative Care
• /
• v.23 no.3
• /
• pp.139-150
• /
• 2020

Purpose: The purpose of this study was to investigate the levels of end-of-life care competency; knowledge, attitudes, and experiences regarding advance directives; perceptions of good death; and end-of-life care obstacles and supportive behaviors among tertiary care nurses. Methods: The participants were 150 nurses at a tertiary hospital in Jinju, Korea. The data collected using a questionnaire were analyzed using descriptive statistics, the t-test, analysis of variance, Pearson correlation coefficients, and stepwise multiple regression in SPSS for Windows version 24.0. Results: The mean (±SD) score of end-of-life care competency was 3.63 (±0.53) on a 5-point scale. A significant difference in end-of-life care competency was found according to whether nurses had experienced the death of a family member or acquaintance (P=0.029). According to stepwise multiple regression analysis, the factors affecting end-of-life care competency were the frequency of end-of-life care supportive behaviors (β=0.38, P<0.001), experience with advance directives (β=0.29, P<0.001), and marriage (β=0.15, P=0.039). This model had an explanatory power of 27.9% (F=18.87, P<0.001). Conclusion: In order to improve nurses' end-of-life care competency, it is important to strengthen end-of-life care supportive behaviors by exposing nurses to those behaviors and providing frequent experience with advance directives.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.237-241
• /
• 1986

In clinical microsurgery, limitation of space often prohibits rotation of a double clamp in an end-to-end anastomosis, or shortage of length of the secondary vessel in an end-to-side anastomosis does not allow visualization of the back wall. In these situation, back wall repair is extremely difficult. To overcome this problem, we use continuous suture technique without rotation of double clamp for end-to-end and end-to-side anastomosis of the 40 rat femoral arteries. After continuous sutures for microarterial anastomosis, the following results were obtained: Continuous sutures are useful in anastomosis where there is unavoidable limited access to the posterior wall and for some of the larger vessels now being anastomosed in free flap and other reconstructive surgery.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.119-124
• /
• 1996

End milling operation is very important in machining precision components. Deterioration of surface roughness and surface geometry will cause more process for surface finishing. According to the feed rate and the cutting edge geometry, the cusp which is geometrically uncut surface is determined. To reduce the cost for dinishing operation after end milling, the cusp must be remaianed in small size as possible. Due to the cylindrical type of the end mill, tool deflection is one of the main problems in surface generation. The cutting resistance and the rigidity of the end mill will determine the size of tool deflection. One more important factor which deteriorate surface quality comes from the error in manufacturing end mills. Run-out of end mill which is the difference of the radius of each cutting edges will produce the difference of the cusp size in every rotation of end mill. These three major factors to the surface quality will be analized and the result will be compared with experimental ressult.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.245-251
• /
• 2004

This paper is studied on the effect of TiAlN coated Ball End Mill and MQL(Minimum Quantity Lubrication) cutting condition on cutting characteristic of high hardness steels. KP4 steels[HRC32] and STD11[HRC60] heat treated steels were used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized in the cutting tests. MQL device was used to spray botanical oil coolant. Result showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed[$245{\sim}320m/min$] about $2.3{\sim}5.7$ times for KP4 steels and about $2.5{\sim}4.3$ times far STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good for KP4 steels than single layer coated.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.19-23
• /
• 2019

In the mold industry, CAM software has been introduced to solve the impossible or time-consuming part of the mold industry because the increase in labor costs, the drop in mold price, and the short delivery time are tasks to be solved not only in the manufacturing industry but also in the mold industry as a whole. In order to reduce the processing time and improve the surface roughness, we have been conducting various researches for efficient machining. This study was carried out to compare the ball end mill and radius end mill tools with the Power mill software and NC brain software under the same conditions and to find out the most efficient method of machining the smooth drafting surface and improving the surface roughness. (1) By machining the smooth drafting surface using radius end mill, the machining time is 23.7% faster than when using ball end mill. (2) Surface roughness when machined with radius end mill is smoother than when using ball end mill. Based on these results, it can not be applied to all shapes, but if it is a relatively wide and simple gradient shape, the raster machining method using radius end mill can be more effective in terms of delivery and quality than machining with ball end mill.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.57-65
• /
• 2021

With the increased utilization of CAM programs, end-mill processing is most commonly used for machining and metal processing. In particular, hole or shaft machining has high assembly precision, which inevitably leads to high utilization of end mills. However, the analysis of quality characteristics according to the process conditions of end mills is not performed systematically at the site, causing poor quality and productivity. The most influential factor of quality is the runout of the end mill. In this paper, the number of turns of the end mill, number of tool blades, cutting direction, and artificial runout volume were determined to identify the correlation between the epicenter, cylindricality, and surface roughness. Two types of end mills, three levels of runout, three levels of rotational speed, and two cutting directions were considered and 36 rounds of hole processing were conducted. For the analysis of shape characteristics according to the set process variables, the experimental planning method was applied to the measured specimen and the processing characteristics were analyzed according to the runout of the end mill through correlation analysis.

• Journal of muscle and joint health
• /
• v.31 no.2
• /
• pp.86-94
• /
• 2024

Purpose: The goal of this study aimed to understand the factors influencing the empathy competence and moral sensitivity of nurses working in tertiary general hospitals who offered end-of-life care. Methods: Descriptive data were collected from self-reported questionnaires completed by 164 nurses with direct nursing care experience with end-of-life patients at two tertiary general hospitals located in Busan, Korea. The variables examined were empathy competence, moral sensitivity, and end-of-life care performance. Data were analyzed using SPSS version 27.0 software. Results: Participants scored 3.73±0.40 on empathy competence, 4.97±0.51 on moral sensitivity and 2.91±0.37 on end-of-life care performance. There was a significant positive correlation between empathy competence and end-of-life care performance, and between moral sensitivity and end-of-life care performance. The factors affecting nurses' end-of-life care performance, empathy competence and moral sensitivity, exhibited with an explanatory power of 31%. Conclusion: Programs to increase empathy competence and moral sensitivity should be developed to improve nurses' end-of-life care performance.