• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.185-192
• /
• 2001

In SRM drive, the ON·OFF angles of each phase switch should be accurately controlled in order to control the torque and speed stably. The accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to control the SRM power circuit, respectively. However, as the speed increases, the amount of the switching angle deviation from the preset values is also increased. Therefore, the low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper, As a result, a stable high speed SRM drive can be achieved by the high resolution switching angle control and it is verified from the experiments that the proposed encoder the logic controller can be a powerful candidate for the practical low cost SRM drive.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.130-135
• /
• 1999

The main scale of linear encoder greatly effects on the precision of displacement measurement. Especially when needing the long range measurement the length of main scale should be increased accordingly. In this paper we propose a linear encoder that uses laser interference pattern as main scale for long range measurement. The linear encoder is similar to Michelson interferometer excepting that the reference mirror is tilted so as to obtain interference fringe pattern and a grating panel is attached on a quadratic photo diodes. Four kinds of grating having phase difference of 0. $\pi$/4, $\pi$/2, 3$\pi$/4 are arranged on the panel. The experimental results show that signals of quadratic photo diode A, B, {{{{ {-}atop {A } }}}} and {{{{ {- } atop {B } }}}} are cosine wavelike and successive signals have phase difference of $\pi$/4 each other. So the proposed method can achieve improved measurement resolution.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.421-424
• /
• 2002

In this paper, we introduce an encoder design technique of multiple symbol trellis coded modulation for noncoherent continuous phase frequency shift keying (MTCM/NCPFSK) on the interleaved Rician fading channel. To find dominant factors which affects the error probability of MTCM/NCPFSK, we derive the pairwise error probability (PEP) of MTCM/NCPFSK and find that the error probability mainly depends on the effective length of error event and the corresponding squared product distance (SPD) for the small value of Rician parameter K. Using this performance criteria, we search for the optimal encoder of MTCM/NCPFSK for the interleaved Rician fading channel. We also compare that encoder with the encoder designed for additive white Gaussian noise channel.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.190-198
• /
• 2002

In switched reluctance motor(SRM) drive, it is necessary to synchronize the stator phase excitation with the rotor position. Therefore the rotor position information is an essential. Usually optical encoders or resolvers are used to provide the rotor position information. These sensors are expensive and are not suitable for high speed operation. In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, witch are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper It is verified from the experiments that the proposed encoder and logic controller can be a powerful candidate for the practical low cost SRM drive.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.74-81
• /
• 1999

The integrated chip of optical micro-encoder was fabricated and the feasibility as displacement measurement device was confirmed. The geometry of micro-encoder was designed to utilize the optical interference effect on the second order of diffracted beams. The hybrid-type micro-encoder consisted with light emitting diode, photodiode, polyimide wave-guide and micro-lens provides stable micro-encoding results for high speed displacements. The measurement shows the resolution of displacement of 1.00 +/- 0.02 ${\mu}m$ for the grating with scale pitch of 2.0${\mu}m$.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.193-200
• /
• 2019

The auto-encoder network which is a good candidate to handle the modeling of the signal strength attenuation is designed for denoising and compensating the distortion of the received data. It provides a non-linear mapping function by iteratively learning the encoder and the decoder. The encoder is the non-linear mapping function, and the decoder demands accurate data reconstruction from the representation generated by the encoder. In addition, the adaptive network width which supports the automatic generation of new hidden nodes and pruning of inconsequential nodes is also implemented in the proposed algorithm for increasing the efficiency of the algorithm. Simulation results show that the proposed method can improve the neural network training surface to achieve the highest possible accuracy of the signal modeling compared with the conventional modeling method.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.333-341
• /
• 2003

In induction motor control systems driven by the indirect vector control scheme, the rotor speed is measured to determine the flux angle which is a key variable in the control algorithm. The most popular way to measure the angular velocity is the use of rotary encoder. Since the errorneous measurement of rotor speed results in incorrect flux angle estimate, the control input generated based on the faulty information should be far from the desired (correct) value and deteriorates the overall control performance. In this paper the effects of encoder fault on motor variables and control performance are analyzed by both theoretical approach and experimental study. A parity equation based on the Power is suggested and applied to detect the incipient fault of encoder.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.199-203
• /
• 2013

In this paper, a fast algorithm of discrete cosine transform-based interpolation filter (DCT-IF) for HEVC (high efficiency video coding) encoder is proposed. DCT-IF filter accounts for around 30% of encoder complexity, according to the computational complexity analysis with the HEVC reference software. In this work, the proposed DCT-IF is optimized by applying frame-level interpolation, SIMD optimization, and task-level parallelization via OpenMP on a developed C-based HEVC encoder. Performance analysis is conducted by measuring speed-up factor of the proposed optimization technique on the developed encoder. The results show that speed-up factors by frame-level interpolation, SIMD, and OpenMP are approximately 38-46, 3.6-4.4, and 3.0-3.7, respectively. In the end, we achieved the speed-up factor of 498.4 with the proposed fast algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.117-124
• /
• 2001

In a SRM drive, the on/off angles of each phase switch should be accurately controlled in order to control to torque and speed in a stable way, The accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. However, as the speed increase, the amount of the switching angle deviation from the preset values is also increased by the sampling period of the microprocessor. Therefore, a low cost encoder suitable for a practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper. It is verified from the experiments that the proposed encoder and logic controller can be a powerful candidate a the practical low cost SRM drive.