• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.137.1-137.1
• /
• 2011

올리빈 구조의 $LiFePO_4$ 정극 활물질은 $650^{\circ}C$에서 고상법으로 제조되었다. $LiFePO_4$의 전자전도도를 향상시키기 위하여 graphite nanofiber(GNF)를 각각 3wt%, 5wt%, 7wt%, 9wt% 첨가하여 $LiFePO_4$-C를 제조하였다. 제조된 분말의 입자 형태를 확인하기 위하여 X-ray diffraction(XRD)과 File Electronic Scaning Electromicroscopy(FE-SEM)를 측정하였다. XRD결과로부터 제조된 분말은 모두 순수한 결정 구조를 나타내었고 입자의 크기는 약 200nm였다. 5wt% GNF를 첨가한 $LiFePO_4$-C는 기타 첨가량에 비해 방전용량이 가장 높았다. 첫 사이클의 용량은 151.73mAh/g 나타났고 50 사이클 뒤에도 92% 이상을 유지하고 있었다. 첨가하지 않은 것에 비해 43% 증가하였다. $LiFePO_4$-C(3wt%), $LiFePO_4$-C(7wt%), $LiFePO_4$-C(9wt%)의 첫 사이클 방전용량은 각각 147.94mAh/g, 136.64mAh/g, 121.07mAh/g 나타났다. $LiFePO_4$-C(5wt%)에 비해 용량은 떨어쪘지만 순수한 $LiFePO_4$보다 많이 높았다. 임피던스 결과를 보면 기타 첨가량에 비해 $LiFePO_4$-C(5wt%)의 저항 제일 낮았다. 이는 충방전 결과와 일치하였다. graphite nanofiber의 첨가로 인하여 $LiFePO_4$ 정극 활물질의 전자전도도가 높아지고, 따라서 전기화학적 특성도 크게 향상되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1081-1091
• /
• 2005

Unlike conventional DVB-T transmission with the streaming method, DVB-H system based on the IPDC(IP Data Casting) method uses Time-slicing scheme to achieve the maximization of portability by reducing the power consumption of a receiver. To enhance the power efficiency of the receiver, Time-slicing scheme controls the receiver operation to perform only for corresponding burst in specific time slot. The additional power saving can also be achieved by reducing the required time for synchronization. In this paper, we propose a fast scattered pilot synchronization algorithm, which detects the pilot pattern of currently received OFDM symbol. The proposed scheme is based on the correlation between the adjacent subcarriers of potential scattered pilot position in two consecutively received OFDM symbols. Therefore, it can reduce the time for the scattered pilot synchronization within two symbols as com-pared with the conventional method used for DVB-T. And the proposed algorithm has better performance than the two schemes proposed by Nokia for DVB-H and the method using correlation with reference signal. Extensive com-puter simulation is performed based on ETSI EN300 744 ETSI and performance results show that the proposed algorithm has more efficient and stable operation than the conventional schemes.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.225-231
• /
• 1989

The heterogeneous rate constants for the electrochemical reduction by $trans-[Co(en)_2X_2](ClO_4)_n$(where X is cyanide, nitrite, ammonia, and isothiocyanate) at mercury and glassy carbon electrode were investigated by cyclic voltammetry, DC polarography, and by using rotating disk electrode. The good linear relationship was obtained between the activation energy of reduction and absorption wave number of complexes on glassy carbon electrode. At mercury electrode, $NO_2^-$ ligated complex showed the large deviation from the linear relationship. The difference in the value of rate constants for $NO_2^-$ ligated complex between mercury and glassy carbon electrode was about three order of magnitude which was much larger than the other complexes. It was suggested that $NO_^-$ ligated complex was reduced by inner-sphere mechanism on mercury electrode from the larger value of activation energy and entropy on mercury than carbon electrode.

• Journal of Educational Research in Mathematics
• /
• v.13 no.2
• /
• pp.159-178
• /
• 2003

This study analyzes on the reasoning in the process of justification and mathematical problem solving in our primary mathematics textbooks. In our analyses, we found that the inductive reasoning based on the paradima-tic example whose justification is founnded en a local deductive reasoning is the most important characteristics in our textbooks. We also found that some propositions on the properties of various quadrangles impose a deductive reasoning on primary students, which is very difficult to them. The inductive reasoning based on enumeration is used in a few cases, and analogies based on the similarity between the mathematical structures and the concrete materials are frequntly found. The exposition based en a paradigmatic example, which is the most important characteristics, have a problematic aspect that the level of reasoning is relatively low In Miyazaki's or Semadeni's respects. And some propositions on quadrangles is very difficult in Piagetian respects. As a result of our study, we propose that the level of reasoning in primary mathematics is leveled up by degrees, and the increasing levels are following: empirical justification on a paradigmatic example, construction of conjecture based on the example, examination on the various examples of the conjecture's validity, construction of schema on the generality, basic experiences for the relation of implication.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.760-763
• /
• 2007

We studied how linear and nonlinear heart rate dynamics differ between normal fetuses and uncomplicated small-forgestational age (SGA) fetuses, aged 32-40 weeks' gestation. We analyzed each fetal heart rate time series for 20 min and quantified the complexity (nonlinear dynamics) of each fetal heart rate (FHR) time series by approximate entropy (ApEn) and correlation dimension (CD). The linear dynamics were analyzed by canonical correlation analysis (CCA). The ApEn and CD of the uncomplicated SGA fetuses were significantly lower than that of the normal fetuses in all three gestational periods (32-34, 35-37, 38-40 weeks). Canonical correlation ensemble in SGA fetuses is slightly higher than normal ones in all three gestational periods, especially at 35-37 weeks. Irregularity and complexity of the heart rate dynamics of SGA fetuses are lower than that of normal ones. Also, canonical ensemble in SGA fetuses is higher than in normal ones, suggesting that the FHR control system has multiple complex interactions. Along with the clear difference between the two groups' non-linear chaotic dynamics in FHR patterns, we clarified the hidden subtle differences in linearity (e.g. canonical ensemble). The decrease in non-linear dynamics may contribute to the increase in linear dynamics. The present statistical methodology can be readily and routinely utilized in Obstetrics and Gynecologic fields.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.385-392
• /
• 2012

The purpose of this study is investigated on the combustion and the thermal characteristics of porous media burners which are many using for a condensing boiler recently. In addition, results of this study will be used the fundamental information to decide the burner type which will be applied to the future development of EGR(Exhaust gas recirculation) condensing boiler. Two flat type of burners made of a the metal fiber(MF) and the ceramic(CM) were selected and examined, experimentally. As experimental results, the emitted CO concentration of CM was higher than that of MF. However, the NO concentration of MF was higher than that of CM. The efficiencies of both burners were increased as increasing the burner capacity. While the efficiency of MF was higher than that of CM, regardless of the burner capacity. In the experimental range, MF is appropriated for the burner material and 0.8 of equivalence ratio is an optimal operation condition, regarding of the proportional control, the thermal efficiency and emitted NO and CO concentration based on the regulations of KS B standard and EN 677 standard.

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.371-380
• /
• 2005

The purpose of this experimental study was to evaluate aㅜd compare maxillary arch dimensional and positional changes between first and second premolar extraction groups. The Calorific Machine was used to illustrate tooth movement in three dimensions. The experimental teeth except the first or second premolars were embedded in artifical alveolar bone. The extraction space was closed using arch wires with bull loops into which 15 degree gable bends were placed. Before and after space closure, radiographs were taken in the sagittal and occlusal directions using occlusal films. The results showed greater mean maxillary incisor retraction and less anchorage loss in the maxillary first premolar extraction group than in the maxillary second premolar extraction group. Mesiopalatal rotation of anchor teeth was greater after extraction of a maxillary second premolar than a maxillary first premolar (P<.001).

• The Journal of the Korean bone and joint tumor society
• /
• v.8 no.2
• /
• pp.58-62
• /
• 2002

The incidence of giant cell tumors represents only 5% to 10% of all bone tumors. Occurrence on the small bones of the hand and foot are very rare. They typically present with pain and sometimes a pathologic fracture or even soft tissue extension. The radiographic appearance is highly characteristic. An eccentric osteolytic lesion is seen, producing cortical thinning and expansion, and possessing a delicate trabecular pattern. In tarsal bones, poorly or well-defined osteolytic lesions of variable size are encountered. Surgical treatment remains the preferred therapy. Marginal or wide en bloc resection has had far better results in term of local recurrence. Several authors have suggested extended curettage and cement as an alternative to en bloc resection. Follow-up is necessary to monitor for both local recurrence and the infrequent pulmonary metastases.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.105-109
• /
• 2008

A safety valve has a valve mechanism for the automatic release of gas from piping system when the pressure exceeds preset limit cause of a defect of a pressure regulator, condensation of water in a pipe. Therefore, for the safety of pressure regulating station, it is essential to study the flow regime and characteristics of safety valve. This article presents the numerical analysis on the flow analysis, the ejection capacity and required effective discharge area of the safety valve that is established in pressure regulating station. Then, the results are compared and analyzed with domestic and foreign regulations such as API(America Petroleum Institute), EN(European Standard), and NF(Norme Francise). Moreover, the installation number of safety valve is considered by using domestic and foreign regulations and maximum reguired effective discharge area of safety valve.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.320-328
• /
• 2017

In order to analyze the influence on derailment safety according to the aging of primary rubber springs widely applied to railway vehicles, characteristic tests were carried out on aged primary rubber spring samples. To analyze the effect of primary rubber spring aging on derailment safety, a vehicle dynamic analysis was carried out. The results of the vertical characteristics test for the rubber spring specimens with 17 years of service life revealed that the displacement restoration function was degraded due to rubber aging and the spring stiffness significantly increased. The results of the running dynamic analysis simulating the twist track running in accordance with the EN14363 standard, compared with the normal vehicle model (Case 1), showed that the derailment coefficient and the wheel unloading of the vehicle model (Case 2) using the aging primary spring characteristic increased, and the derailment safety was degraded. IN particular, it was found that the derailment safety due to the reduction of the wheel load is weak in the transient section where a steep slope change occurs.