• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1099-1100
• /
• 2009

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1266-1268
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU (Electrical Multiple Unit) and TCMS (Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) mathod, which is the layer 2 DDLM(Direct Data Link Mapper) protocol of ProfiBus.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.77-83
• /
• 2016

The electric quality of train is represented by voltage and current harmonics at PT(Ratio 25,000/15/[V]) which is located between pantograph and primary winding of train transformer. In this paper, voltage and current harmonics were measured on the test EMU(electric multiple unit)train with maximum speed of 180km/h in existing railway lines(chungbuk, Taeback, Honam). As a results of test, it is found that the electric quality of train depends on the mostly operation conditions which is accelerating mode and braking mode on each sections. Voltage THD is above all 3[%] and current harmonics is monitored from lowest Harmonic to highest Harmonic in case of accelerating mode. But, highest current harmonics is not monitored in case of breaking mode. The results in this paper can help to stabilize the power device and power converter of the test EMU train.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.155-157
• /
• 2008

An electric multiple unit(EMU) consists of car body, bogie and brake equipment which is directly related to safety and performance of the motorcar. The blending brake mixed an electric brake and a friction brake is to reduce the energy by applying the restoration energy caused when the motorcar is stopped to car lines and to curtail the maintenance cost by saving the friction brake use. We have developed the advanced EMU since 2004, based on the experiences on the standard EMU in 1999, and we develop the installation which minimizes the use rate of the friction air brake by maximizing the electric brake use in the existing blending brake. We could accomplish the goal by improving the motorcar's Performance and solving the restoration energy's deficit by the friction brake. Actually, when it comes to the test results of standard EMU, except the service brake, in most conditions, we use electric brake to meet the requirements of the necessary brake power, exclusive when the motorcar leaves and stops. Therefore, in this paper, we consider the design concept of motorcar's blending brakes and suggest the way to develop the blending brake using the electric brake maximumly, which is caused by adequately controling the electric brake and the restoration brake.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1229-1234
• /
• 2009

현재 한국철도공사에서 운행하는 철도차량은 KTX, 새마을호동차(PP), 선행전기기관차 (NEL), 전기기관차 (EL), 디첼기관차, 도시통근형동차(CDC), VVVF, 저항제어차 등 8 여종에 이르고, 현재는 150km/h 급 간선행전기동차 (Electric Multiple Unit)는 시험운행중이다. 또한 조만간 폐차되는 새마을호동차의 대체차량으로 180km/h 급 간선형전기동차의 도입이 예정되어 있다. 하지만 아직까지 철도차량의 운전실제어대 설계기준이 없고, 제어기기의 배치 및 형식 등에 대해 운전자의 입장에서 인체공학적 접근을 시도한 연구도 전무한 실정이어서 개발되는 차량마다 제어기의 형식 및 조작방식이 상이하다. 이는 운전자의 기기 취급 오류률 유발할 가능성이 매우 크며, 신규차량 도입시 별도의 운전자 교육을 시행해야하는 동 운영 상의 효율성이 매우 떨어진다. 따라서 운전자의 의견수렴을 바탕으로 운전 중 상시 취급하는 제어기기 및 안전설비에 대하여 안전공학 및 인체공학적 설계기준을 마련하여 운전자로 하여금 기기취급에 정확성을 높이고, 이례적인 상황에서 보다 더 신속한 대처를 할 수 있도록 하여 철도차량 안전성과 운영상의 효율성을 증진하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.241-243
• /
• 2006

To supply the materials the right time, and the right place, it is required some information maintenance system to manage this procedure effectively. In this paper, we represent the standard products classification for EMU and the materials maintenance information system to manage the parts used EMU maintenance efficiently. The standard material classification is matched to G2B code made by the Supply Administration. The implemented material information system can perform various functions such as the inquiry of the number of stocks, the demand of the materials, and etc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.218-225
• /
• 1999

Speed-up and mass reduction of EMU(Electrical multiple unit) causes increase of interior noise. One of the best ways to reduce the interior noise is to identify noise sources. In this study, we evaluated interior noise by contribution analysis. This method is to predict the interior noise contribution of carbody by using transfer function between acceleration and sound pressure. The plan of the interior noise reduction based on the test results was also presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.66-71
• /
• 2002

Squeal noise is generated by railway vehicles transversing tight curves. This squeal has always been noticed as one of the most disturbing noise sources of railway systems. At present we cannot predicted squeal noise that is influenced by a large number of dependent parameters. In this study, we performed structural analysis to find out the frequency of the wheel and also measured squeal noise at Seoul subway line 1, line 2, line 4 for domestic EMU(Electrical Multiple Unit).

• 한국철도학회논문집
• /
• 제11권1호
• /
• pp.39-44
• /
• 2008

본 연구에서는 실측 주행시험 결과데이터를 바탕으로 윤축 진동과 설계변수간의 관계를 규명하고자 2 자유도계 모델을 구성하였다. 특히 2차 현가장치인 공기스프링의 점탄성 특성을 반영하기 위해 니시무라 공기스프링 모델을 적용하였다. 수치해석 결과 내부 압력 감소 및 보조 공기탱크 체적 증가 시 객차 가속도응답이 감소하는 것을 확인할 수 있었다. 이에 안정성을 헤치지 않는 범위 내에서 현가장치의 강성을 조정해 볼 필요가 있음을 알았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.366-368
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU(Electrical Multiple Unit) and TCMS(Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) method, which is the layer 2 DDLM (Direct Data Link Mapper) protocol of ProfiBus.