• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.175-178
• /
• 1996

Power system is becomming more and more complex and large. So system is stressed increasingly. This paper presents a method to select contingency ranking in power systems for EMS operation. Firstly, the proposed method is applied line outage using Thevenin equivalent circuit. Secondly, Contingency harmful to system is selected by loss variation between base case and fault. Thirdly, this paper prescribed simulated line sequence. Therefore this algorithm shows higher computation speed and effective memory use.

• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.31-43
• /
• 2006

In Korea, the Emergency Medical Service, EMS is provided by Fire Services with 119 EMS and all the public uses the service for free. Although it appears very successful and is respected nationally, structural problem EMS exist and are worsening. First of all, the "free riding effect" becomes increasingly problematic. Some argue that 30% of the demands is not urgent or emergent. The total number of demands is increasing even without the free riding effect. The Current EMS system itself cannot meet the increasing EMS demand. The medical aspect is so poor that the EMS cannot dispatch a medical specialist to the scene. The cardiac arrest resuscitation rate is only $1.24{\sim}9.9%$, compared to 40% in Boston, MA, USA. But due to the regulations and limitations of the Fire Service organization, it is difficult to secure enough EMS resources. To work out these problems, it needs a structural innovation. To secure enough resources and achieve higher medical performance we should invite the medical sector and the private sector into EMS arena by contracting partnerships with Fire Services and charging a reasonable EMS fee. We found through statistical test that any partnership system is more effective than fire-alone system and most countries around the world have partnership system rather than fire-alone system.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.30-34
• /
• 2005

Due to old Toshiba EMS's database size limit and hardware old aging, KPX(Korea Power Exchange) had introduced New EMS from AREVA(old ALSTOM) in July 2002. After then KPX had committed many man power and time to normalize EMS NA(Network Analysis) functions for using real power system. At initial stage, to normalize State Estimator which is the backbone of all other NA functions and DTS(Dispatcher Training Simulator}, KPX had corrected numerous topology errors, network model errors, non-scanned and wrongly scanned SCADA measured errors. After SE function study, running test and tuning, State Estimator could finally have been run properly and stably from June 2003. Based on SE running, KPX had normalized real time Contingency Analysis, and study mode Power Flow, STNET and DTS. From early 2004, dispatchers have been trained to use NA and DTS for the purpose of stable SE running, NA operation & results reading and urgent equipment outage reviewing. EMS NA have been greatly contributed to operate real time power system stably. Above NA normal operation by KPX own efforts under the no experience of NA running, KPX made a good precedent. This paper is intended to introduce EMS NA normalization process, operation status, and etc in Korea power system operation.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.69-79
• /
• 1999

We have implemented the telecommunication management functions based on TMN (Telecommunications Management Network) architecture that is standardized by ISO/ITU-T. TMN has been developed to manage heterogeneous networks, services and equipment. In this paper, we first analyze the detailed functions of EMS (Element Management System) that performs core functions in the subnetwork management of TMN architecture. We propose an implementation method of EMS for efficient subnetwork management and verify its performance and functionality through detailed implementation and various testing. The proposed EMS consists of EML-Manager module and NML-Agent module. The EML-Manager module controls NEL (Network Element Layer) through the CMIP operations on the managed-objects. The NML-Agent module processes the requests from NMS (Network Management System) in upper layer. We have implemented NMS that performs only the NML-Manager function to test the proposed EMS, and we have used NE-Agent that was designed and implemented by the B-ISDN Lab. of Yeungnam University. The implemented EMS has three management functions: configuration management function, performance management function, and fault management function. We confirmed that the EMS operated normally as we tested the EMS. As further research works, the implementation of NMS with both NML-Manager function and SML-Agent function is required.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.959-961
• /
• 1996

In this paper, we study the modeling and control of Electro-Magnetic Suspension System with 2 Degree Of Freedom. While the previous researchers considered the control of single rail EMS Systems, we consider the control of two rail EMS Systems. We first derive a simple model to represent the dynamics of EMS System with 2 D.O.F., using the Lagrange's method. The nonlinear equations of motion that we derive are shown to be linearizable by coordinate change and nonlinear static state feedback. The nonlinear static state feedback controller is constructed explicitly.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.63-69
• /
• 2015

Among the material handling system, EMS (Electric Monorail System), which is the facility of transferring the material hanging on truss, has the strength point of the maximum utilization of working space and the improvement of working environment including low-level noise generation. This paper will introduce the variable method of EMS rail analysis, which has the main role of supporting the whole material weight and guiding them with high-speed transportation, and, based on the analysis, the direction of optimization of the rail design be described. The rail with light-weight and high-strength contributes the reduction of the load of truss, the cost-down of rail production and the easy-installation on site.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.304-305
• /
• 2011

이산화탄소의 배출로 인한 지구온난화와 화석연료의 고갈로 인한 에너지난은 신재생 에너지원의 필요성을 증가시켰다. 현재 국내에서는 디젤 발전기로 전력을 공급하는 울릉도 시스템을 신재생 에너지원을 계통에 연계시키는 울릉도 녹색 사업이 진행 중에 있다. 하지만 울릉도는 육지와의 거리가 멀어 계통 연계의 어렵고 신재생 에너지원의 출력 변동성으로 인한 계통운영에 어려움이 예상된다. 울릉도의 안정적인 전력 공급을 위해 Micro-Grid EMS 구축이 요구되는 상황이며 본 논문에서는 Micro-Grid EMS 구축을 위한 방안 및 방향성을 제시하고자 한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.271-276
• /
• 2004

The risk assessment model is an important subsystem for effective establishment and operation of EMS (environment management system). In case of poor risk assessment long-term and large-scale failure expense might be brought. Managing policy, target and other indices based on risk assessment can guarantee successful EMS. In this paper, we aim at comparative analysis of various risk methods and propose an alternative risk assessment model for EMS.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1231-1240
• /
• 2015

Nowadays, in islands where electricity should be provided autonomously, stand-alone microgrid technologies using renewable energy such as sunlight generation and wind power generation come into wide use. The microgrid electricity generation using renewable energy is greatly affected by the natural environment of a site. In order to maintain stable electricity supply for fluctuating electricity generation due to natural environment, the energy management via EMS is positively necessary. In existing stand-alone microgrid EMS, system operation logic is not changeable flexibly because compiled or builded codes are released into the EMS of a site, respectively. In this paper, we designed a flexible operating script-based microgrid EMS Framework for various sites and applied it to some island sites. We could confirm its usability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1020-1025
• /
• 2007

EMS(energy management system) and SCADA(supervisory control and data acquisition) systems are used for reliable and efficient operation of electrical power systems. Various functions in EMS such as power flow, contingency analysis, security analysis essentially need accurate data set for reliable operation. State estimation can be a tool for providing these data. In this paper, programs for observability analysis and bad data processing are developed. Fundamental algorithms are introduced and validity of the proposed techniques is inspected with test cases.