• Journal of Biomedical Engineering Research
• /
• v.13 no.1
• /
• pp.9-18
• /
• 1992

This paper describes a quantitative analysis of electromyography (EMG) measured from seven subjects performing four seated dynamic tasks. EMG signals were mom- bored using 15 surface electrodes which were placed on selected trunk and lower extrmity muscles of the right side of the body. Each EMG signal was then processed through rectification, integration, and filtering. Based on the maximum level of the processed EMG, it was found that the trunk and ankle muscles play an important role on the postural control during the seated tasks.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.689-694
• /
• 2011

Objective: The aim of this study is to evaluate the fluctuation of signal amplitude during repetitive dynamic contraction based on surface electromyography(EMG). Background: The most previous studies were considered isometric muscle contraction and they were difference to smoothing window length by moving average filter. In practical, the human movement is dynamic state. Dynamic EMG signal which indicated as the nonstationary pattern should be analyzed differently compared with the static EMG signal. Method: Ten male subjects participated in this experiment, and EMG signal was recorded by biceps brachii, anterior/posterior deltoid, and upper/lower trapezius muscles. The subject was performed to repetitive right horizontal lifting task during ten cycles. This study was considered three independent variables(muscle, amplitude processing technique, and smoothing window length) as the within-subject experimental design. This study was estimated muscular activation by means of the linear envelope technique(LE). The dependent variable was set coefficient of variation(CV) of LE for each cycle. Results: The ANOVA results showed that the main and interaction effects between the amplitude processing technique and smoothing window length were significant difference. The CV value of peak LE was higher than mean LE. According to increase the smoothing window length, this study shows that the CV trend of peak LE was decreased. However, the CV of mean LE was analyzed constant fluctuation trend regardless of the smoothing window length. Conclusion: Based on these results, we expected that using the mean LE and 300ms window length increased reproducibility and signal noise ratio during repetitive dynamic muscle contraction. Application: These results can be used to provide fundamental information for repetitive dynamic EMG signal processing.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.380-388
• /
• 2004

This study proposed an improved spike detection algorithm which automatically detects suitable spike threshold on the amplitude of surface electromyography(SEMG) signal during isometric contraction. The EMG data from the low back muscles was obtained in six channels and the proposed signal processing algorithm is compared with the median frequency and Gabriel's spike parameter. As a result, the reliability of spike parameter was inferior to the median frequency. This fact indicates that a spike parameter is inadequate for analysis of multi-channel EMG signal. Because of uncertainty of fixed spike threshold, the improved spike detection algorithm was proposed. It automatically detects suitable spike threshold depending on the amplitude of the EMG signal, and the proposed algorithm was able to detect optimal threshold based on mCFAR(modified Constant False Alarm Rate) in the every EMG channel. In conclusion, from the reliability points of view, neither median frequency nor existing spike detection algorithm was superior to the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.115-115
• /
• 2000

A gait pattern classification method using electromyography(EMG) signal is presented. The gait pattern with four stages such as stance, heel-off, swing and heel-strike is analyzed and classified using feature parameters such as zero-crossing, integral absolute value and variance of the EMG signal. The EMG signal from Tibialis Anterior and Gastrocnemius muscles was obtained using the surface electrodes, and low-pass filtered at 10kHz. The filtered analog signal was sampled at every 0.5msec and converted to digital signal with 12-bit resolution. The obtained data is analyzed and classified in terms of feature parameters. Analysis results are given to show that the gait patterns classified by the proposed method are feasible.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.211-220
• /
• 2023

Surface electromyography (sEMG) is a noninvasive method used to capture electrically muscle activity, which can be easily measured even during exercise. The basic unit of muscle activity is the motor unit, and because an sEMG signal is a superposition of motor unit action potentials, analysis of muscle activity using sEMG should ideally be done from the perspective of motor unit activity. However, conventional techniques can only evaluate sEMG signals based on abstract signal features, such as root-mean-square (RMS) and mean-power-frequency (MPF), and cannot detect individual motor unit activities from an sEMG signal. On the other hand, needle EMG can only capture the activity of a few local motor units, making it extremely difficult to grasp the activity of the entire muscle. Therefore, in this study, a method to visualize the activities of motor units in a single-channel sEMG signal by relocating wavelet coefficients obtained by redundant discrete wavelet analysis is proposed. The information obtained through this method resides in between the information obtained through needle EMG and the information obtained through sEMG using conventional techniques.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1014-1020
• /
• 2011

This presents a motion and force estimation system of human fingers by using an Electromyography (EMG) sensor module and a data glove system to be proposed in this paper. Both EMG sensor module and data glove system are developed in such a way to minimize the number of hardware filters in acquiring the signals as well as to reduce their sizes for the wearable. Since the onset of EMG precedes the onset of actual finger movement by dozens to hundreds milliseconds, we show that it is possible to predict the pattern of finger movement before actual movement by using the suggested system. Also, we are to suggest how to estimate the grasping force of hand based on the relationship between RMS taken EMG signal and the applied load. Finally we show the effectiveness of the suggested estimation system through several experiments.

• Journal of TMJ Balancing Medicine
• /
• v.6 no.1
• /
• pp.1-4
• /
• 2016

We investigated the potential of electromyography (EMG) for diagnosing imbalance in the temporomandibular joint (TMJ) to apply functional cerebrospinal therapy (FCST). The electromyography signals were measured in the sternocleidomastoid muscle (SCM) in patients with temporomandibular disorder (TMD) while a FCST specialist conducted a restricted cervical rotation test. In addition, we also observed the changes in the electromyography signals according to pre-treatment or treatment with a TMJ balancing appliance (TBA), a customized TMJ balancing appliance (CBA), or a CBA with one paper bar. The right SCMs of the two patients with right TMJ imbalance had high EMG signals in the right cervical rotation test, while the left SCMs showed low EMG signals in the left rotation. In addition, the high EMG signals in the right SCMs decreased when using the TBA or the CBA, but the EMG signals of the left SCMs showed low EMG values during the treatments. Furthermore, the EMG signals of the right SCMs rose again after artificial imbalance of the right TMJ by the CBA with one paper bar. This case report demonstrated the potential of EMG as an objective diagnostic method for FCST.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.55-64
• /
• 2004

Conventional bipolar surface electromyography(EMG) technique detects only the superimposed electromyographic activity of a large number of motor units due to its low spatial resolution. For the diagnosis of neuromuscular disorder, the information of single MU is required. In this paper, 9 channel array surface electrode system was as designed and MLoG filter was proposed. Also the MCPT(modified convolution processing technique)method was proposed for the improvement of MUAP resolution. For performance evaluation, power spectrum analysis of random data and raw EMG signal comparison of MUAP shape and quantitative estimation of SNR were executed. As a result, the MUAP resolution improvement of 32％ was obtained from the standpoint of the signal-to-noise ratio(SNR).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.142-148
• /
• 2016

Recently, human identification using various biological signals has been studied and human identification based on the gait has been actively studied. In this paper, we propose a human identification based on the EMG(Electromyography) signal of the thigh muscles that are used when walking. Various features such as RMS, MAV, VAR, WAMP, ZC, SSC, IEMG, MMAV1, MMAV2, MAVSLP, SSI, WL are extracted from EMG signal data and ANN(Artificial Neural Network) classifier is used for human identification. When we evaluated the recognition ratio per channel and features to select approptiate channels and features for human identification. The experimental results show that the rectus femoris, semitendinous, vastus lateralis are appropriate muscles for human identification and MAV, ZC, IEMG, MMAV1, MAVSLP are adaptable features for human identification. Experimental results also show that the average recognition ratio of method of using all channels and features is 99.7% and that of using selected 3 channels and 5 features is 96%. Therefore, we confirm that the EMG signal can be applied to gait based human identification and EMG signal based human identification using small number of adaptive muscles and features shows good performance.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.83-89
• /
• 2003

An electromyogram (EMG) using surface electrodes is one of the indirect tests most frequently used to ascertain muscle fatigue. An EMG can be used in two ways. The first technique determines the root mean square (RMS), which reflects the amplitude of the EMG signal. The second technique determines the median and mean power frequencies through EMG power spectrum analysis. The purpose of this article is for determine the correlation between work and percent root mean square(%RMS) and between work and MDF of EMG based on muscle contractions. It is used the %RMS, which reflects the amplitude of the EMG signal For MDF, it is used the frequency power spectrum analysis method, which involves the fast Fourier transformation (FFT) of the original Signals.