• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1378-1379
• /
• 2008

In this study, we developed intelligent spacer built in the internal type UHF PD sensors. 3-Dimensional electro-magnetic simulations were performed to analyze electric-field distribution of the single-phase GIS and three-phase GIS. After considering the spacer's specification, Sensor structures were designed and analyzed using the 3-D EM Simulator. As a result of the simulation the internal type UHF PD sensors were built in. Performance of the sensor built into real scale GIS spacer was measured in terms of return loss and detected Max voltage. And we identified a character of the intelligent spacer by using 5pC partial discharge cell.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.307-309
• /
• 2007

SVDD의 scale prob1em을 해결하기 위하여, 학습 데이터를 sub-groupings하여 group 단위로 SVDD를 통해 학습함으로써 학습 시간을 줄이는, K-means clustering을 이용한 SVDD 방범(KMSVDD)이 제안되었다. 하지만 KMSVDD는 K-means clustering 알고리즘의 본질상 최적의 K값을 정하기 힘들다는 문제와, 동일한 데이터를 학습할지라도 clustered group이 램덤하게 형성되기 때문에 매번 학습의 결과가 달라지는 문제점이 있었다. 또한 데이터의 분포 상태와 관계없이 무조건 타원(dlliptic) 형태의 K개의 cluster로 나누기 때문에 각각의 나눠진 cluster들은 데이터 분포에 대한 특징을 나타내기 힘들게 된다. 이러한 문제점을 해결하기 위하여 본 논문에서는 데이터 분포에서 mode를 먼저 찾은 후 이 mode를 기준으로 clustering하는 Mean Shift clustering 방법을 이용한 SVDD를 제안하고자 한다. 제안된 알고리즘은 KMSVDD와 비교해 데이터 학습 속도에서는 큰 차이가 없으면서도 데이터의 분포 상태를 고려한 형태로 clustering 한 sub-group을 학습하므로 학습의 정확도가 일정하게 되며, 각각의 cluster는 데이터 분표의 특징을 포함하는 효과가 있다. 또한 Mean Shift Kernel의 bandwidth의 결정은 K-Means의 K와는 달리 어느 정도 여유를 갖고 결정되어도 학습 결과에는 차이가 없다. 다양한 데이터들을 이용한 모의실험을 통하여 위의 내용들을 검증하도록 한다.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.326-332
• /
• 2006

In this study, the antenna was proposed for the omni-directional characteristic in horizontal plane. Therefore we proposed $1{\times}4$ microstrip patch array on cylindrical surface for studying microstrip patch antennas. This antenna is designed for 2.45GHz ISM band and applications. This antenna can be applied to the base station of wireless microphone and access point of wireless LAN. The length and width of the patch antenna and the width of the feed line were calculated by using the theory of microstrip patch antenna, by using the both the 2.5D and 3D EM simulators the optimized antenna characteristics are obtained. From result of measured, antenna's impedance of coaxial waveguide port was 51.915-j3.688 ${\Omega}$, the return loss was -31dB and VSWR was 1.081.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.189-196
• /
• 2011

In order to subsitute for the normal mode helical wire antenna, bent monopole antenna combined with a helical structure is proposed as a kind of printed antenna. The antenna which can be operated at 418MHz has been simulated and designed by use of a commercial EM simulator Microwave Studio(MWS). It has been observed that the proposed antenna has good agreements between simulated results and measured results such as the return loss and the radiation pattern. The proposed antenna has been applied practically to the wireless remote controller operationg at 418MHz. It has been observed that the use of the proposed antenna result in similar antenna performance from view point of radiation power when compared with the use of the previous normal mode helical antenna.

• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.137-142
• /
• 1996

The biosynthesis and catabolite repression of cyclodextrin glucanotransferase(CGTase) and cyclodextrinase(CDase) were studied in Bacillus sp. KJI6. In accompanying to the cell growth, CGTase was synthesized during early growth phase (20h culture) and CDase was synthesized during late growth phase (60h culture). Synthesis of CGTase was rather constitutive than that of CDase in the absence or presence of carbon source. Production of CDase was strongly stimulated by amylopectin and $\gamma$-CD medium (about 6 times), but CGTase synthesis was slightly increased (about 1.3 times). Easily metabolizable carbohydrates such as D-glucose, D- fructose and D-mannose completely repressed the expression of CDase, whereas their repressive effect to CGTase synthesis was relatively negligible. By addition of 10 mM cAMP, any significant effect on the synthesis of the two enzymes was not observed. Hardly metabolizable glucose analogues such as 2-deoxy-D-glucose and 3-0-methyl-D-glucopyranose also did not show any repression on the syntheses of CGTase and CDase. This indicates that D-glucose has to be metabolized to exert its repressive effect. With these results, it seems likely that the biosynthesis of CGTase and CDase are regulated by the catabolite repression due to unknown metabolite(s) of EM pathway.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.621-632
• /
• 2012

Recurrent event data can be easily found in longitudinal studies such as clinical trials, reliability fields, and the social sciences; however, there are a few observations that disappear temporarily in sight during the follow-up and then suddenly reappear without notice like the Young Traffic Offenders Program(YTOP) data collected by Farmer et al. (2000). In this article we focused on inference for a cumulative mean function of the recurrent event data with these incomplete observation gaps. Defining a corresponding risk set would be easily accomplished if we know the exact intervals where the observation gaps occur. However, when they are incomplete (if their starting times are known but their terminating times are unknown) we need to estimate a distribution function for the terminating times of the observation gaps. To accomplish this, we treated them as interval-censored and then estimated their distribution using the EM algorithm proposed by Turnbull (1976). We proposed a nonparametric estimator for the cumulative mean function and also a nonparametric test to compare the cumulative mean functions of two groups. Through simulation we investigated the finite-sample performance of the proposed estimator and proposed test. Finally, we applied the proposed methods to YTOP data.

• Korean Journal of Veterinary Service
• /
• v.19 no.1
• /
• pp.39-45
• /
• 1996

Sulfonamides are widely used to treat mastitis of cattle in field. The study was carried out to analyze sulfonamid residues In raw milk from south Kyeonggi area. The milk sample was deproteinated with acetone and defatted with hexane. The residual sulfonamides were extracted with ethylacetate, concentrated under vaccum, reconstituted with the acetate buffer-methanol mixture, reacted with fluorescamine, and then analyzed by HPLC-fluorescence detector(EX. 39nm, Em. 495nm) with methanol : acetate buffer system(3/2, v /v) as a mobile phase. The results analyzed by Thin layer chromatography and High performance liquid chromatography were summarized as follows. 1. A total of 24 cases out of 478 raw milk samples(5.0%) collected during April and May showed positive reaction to sulfonamide residues. Among 24 positive reactors, 9 cases were positive to sulfanilamides(32.1%), 8 cases were positive to sulfathiazoles(28.6%) and 5 cases were positive to sulfamonomthoxines (7.9%) , respectively. 2. During July and August, 31 cases out of 464 raw milk samples(6.7%) showed positive re action to sulfonamide residues. Among them S cases were positive to sulfanilamides, 5 cases sulfathiazoles and 5 cases sulfamonomethoxines(16.1%), respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.14-18
• /
• 1998

A low density polyethylene(LDPE) was examined as an additive in phenol-formaldehyde(PF) resin adhesive for bonding radiata pine plywood. The LDPE was supplied by the commercial manufacturer. The LDPE was compared to a commercial filler commonly used in structural plywood adhesives in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins Inc.. using plywood-type PF resin. A total of 48 three-ply plywoods. 6.3 mm nominal thickness and 30 by 30 em in size, were made at two press times (4 and 5 min). two press temperatures (150 and $160^{\circ}C$) and 30 minute assembly times for four adhesive mixing types. Evaluations of the LDPE addition were carried out by performance tension shear tests after two cycle boil aging tests on plywood per the U.S. Product Standard PS I-83. After accelerated-aging tests. plywoods were exhibited no delamination. The test results included tension shear strength and estimated wood failure values. The plywood test results support the use of polyethylene as an additive in plywood adhesives.

• Journal of Oral Medicine and Pain
• /
• v.17 no.1
• /
• pp.61-71
• /
• 1992

52 Dental students without masticatory problems were selected for this study. They were trained on several mandibular position and mandibular movement exercise, that is, rest position, light bite, tapping, hinge opening, habitual opening, opening limitation, stretch exercise, resistance exercise and clenching. The objectives of this study was to investigate the effects of mandibular movement exercise, especially stretch and resistance, on the experimentally guided limited mouth opening. Muscle activity of the anterior temporalis and the masseter on above mentioned position or exercise were recorded with bioelectric processor EM2(Myotronics, U.S.A.) and the data were processed with SPSS. The obtained results were as follows : 1. Activity of the muscles at rest position were decreased with mandibular movement exercise. 2. Forceful mouth opening on opening limitation increased muscle activity greatly, especially of the masseter. 3. On opening limitation, stretch or resistance exercise was very efficient for decrease of muscle activities. 4. There were no difference of muscle activity between on hinge opening and on habitual opening. Therefore, for muscle relaxation, the two movement exercise can be used interchangeably.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2004

This paper presents a fast and stable imaging scheme using the localized nonlinear (LN) approximation of integral equation (IE) solutions for inverting electromagnetic data obtained in a crosswell survey. The medium is assumed to be cylindrically symmetric about a source borehole, and to maintain the symmetry a vertical magnetic dipole is used as a source. To find an optimum balance between data fitting and smoothness constraint, we introduce an automatic selection scheme for a Lagrange multiplier, which is sought at each iteration with a least misfit criterion. In this selection scheme, the IE algorithm is quite attractive for saving computing time because Green's functions, whose calculation is a most time-consuming part in IE methods, are repeatedly re-usable throughout the inversion process. The inversion scheme using the LN approximation has been tested to show its stability and efficiency, using both synthetic and field data. The inverted image derived from the field data, collected in a pilot experiment of water-flood monitoring in an oil field, is successfully compared with that derived by a 2.5-dimensional inversion scheme.