• Steel and Composite Structures
• /
• v.24 no.3
• /
• pp.359-367
• /
• 2017

In this work, transient heat transfer analysis of functionally graded (FG) carbon nanotube reinforced nanocomposite (CNTRC) cylinders with various essential and natural boundary conditions is investigated by a mesh-free method. The cylinders are subjected to thermal flux, convection environments and constant temperature faces. The material properties of the nanocomposite are estimated by an extended micro mechanical model in volume fraction form. The distribution of carbon nanotube (CNT) has a linear variation along the radial direction of axisymmetric cylinder. In the mesh-free analysis, moving least squares shape functions are used for approximation of temperature field in the weak form of heat transform equation and the transformation method is used for the imposition of essential boundary conditions. Newmark method is applied for solution time depended problem. The effects of CNT distribution pattern and volume fraction, cylinder thickness and boundary conditions are investigated on the transient temperature field of the nanocomposite cylinders.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.1
• /
• pp.383-392
• /
• 1995

The purpose of this investigation was to determine the intratester reliability of measurements obtained with 3 Dimensional Motion Analysis System(3DMAS) by tester on normal subject. Twenty subjects between the ages of 9 and 29(x=22) were evaluated with 3DMAS using a test-retest reliability procedure after a familiarization session. Computerized 3DMAS was done with 4 50 - Hz CCD cameras connected to the ELITE system(B. T. S., Italy) and kinetic data were collected from the AMTI force platform(AMTI., U. S. A). Data were analyzed by the Eliclinic software to obtain gait parameters, joint angles and joint internal moment and power. Test-retest revealed intraclass correlation coefficients from .80 to .99. A series of paired t-tests revealed no significant differences between test and retest values. Finally, it was concluded that tester with 3DMAS could obtain reliable measurements with 3DMAS for determining kinetic, kinematic and gait parameters in normal subjects.

• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.52-56
• /
• 2009

In this research, we have studied the development of dc-dc converter suitable for the driving of mobile instruments by using a dye-sensitized solar cell(DSC). We also have designed a interlocking circuit. The circuit makes power generation be saved in one battery and concurrently be discharged in the other battery. As this application, mobile devices such as MP3, cellular phone are operated by using power generator from DSC during the daytime and they can be operated by using the saving energy of the daytime during the night. Consequently, it has a simple and robust circuit configuration. Besides, we designed dc-dc converter circuit to drive low power instruments by using NMOS switch and PMOS rectifier. Operational modes are analysed, and then validity of the proposed interface circuit is verified through DCS.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.512-514
• /
• 2006

본 논문의 목표는 디지털 방송 수신과 아날로그 방송 수신 및 방송 컨텐츠를 녹화, 저장, 재생이 가능할 뿐만 아니라 각종 멀티미디어 컨텐츠를 즐길 수 있고, 양방향 데이터 방송이 가능하며, 저장된 콘텐트를 스트리밍으로 개인 멀티미디어 플레이어로 스트리밍 이 가능한 다기능 일체형 개인 녹화기를 개발하는 것이다. 고품질 디지털 방송과 기존의 아날로그 방송을 고품질의 디지털 컨텐츠로 변환하여 저장하고, 이를 원하는 시점에 언제든지 볼 수 있을 뿐만 아니라 인터넷 접속하여 어디 서든지 개인 형 멀티미디어 플래이어를 이용하여 스트리밍으로 저장된 컨텐츠를 즐길 수 있다. 이러한 기능을 수행하기 위하여 상당한 성능의 MPU가 필요로 하게 된다. 본 논문에서는 이러한 조건을 만족시키기 위하여 Zoran의 G9Ellite라는 SOC를 채택하였다. 개발된 시스템을 테스트하기 위하여 현재 각 방송사들의 방송을 수신하고 요구된 기능을 테스트 하였다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.97-99
• /
• 2002

A radiation incident took place during treatment on MEDNIF Tele cobalt-60 therapy machine in B.P.KOIRALA MEMORIAL CANCER HOSPITAL in Bharatpur, Nepal. This Chinese made machine has activity of 6240 Curies of cobalt -60. This machine has fulfilled safety requirements. ICRP recommendations, safety rules are followed and practiced. The source was struck up during treatment and a technician was exposed to equivalent dose of 13.75 mSv. recorded by Personal film badge. Risks of workers are comparable to other safe industries. All exposures shall be kept as low as reasonably possible. The higher level of safety is achieved only when every one is dedicated to common goal. A lesson is learnt for future. Good practice is essential but not sufficient. A high demand for tele Cobalt therapy convinced management to replace Mednif machine with a new efficient Elite Tele Cobalt theratron Machine.

• Structural Engineering and Mechanics
• /
• v.57 no.3
• /
• pp.441-456
• /
• 2016

This work reports wave propagation in the nanocomposite cylinders that reinforced by straight single-walled carbon nanotubes based on a mesh-free method. Moving least square shape functions have been used for approximation of displacement field in weak form of motion equation. The straight carbon nanotubes (CNTs) are assumed to be oriented in specific or random directions or locally aggregated into some clusters. In this simulation, an axisymmetric model is used and also the volume fractions of the CNTs and clusters are assumed to be functionally graded along the thickness. So, material properties of the carbon nanotube reinforced composite cylinders are variable and estimated based on the Eshelby-Mori-Tanaka approach. The effects of orientation, aggregation and volume fractions of the functionally graded clusters and CNTs on dynamic behavior of nanocomposite cylinders are studied. This study results show that orientation and aggregation of CNTs have significant effects on the effective stiffness and dynamic behaviors.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.237-241
• /
• 2013

This paper presents an efficient evolutionary method to optimize the gain ripple of multi-pumps photonic crystal fiber Raman amplifier using the Fuzzy Adaptive Modified PSO (FAMPSO) algorithm. The original PSO has difficulties in premature convergence, performance and the diversity loss in optimization as well as appropriate tuning of its parameters. The feasibility and effectiveness of the proposed hybrid algorithm is demonstrated and results are compared with the PSO algorithm. It is shown that FAMPSO has a high quality solution, superior convergence characteristics and shorter computation time.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.27-27
• /
• 2017

The rapid growth of world population, reduction of cultivated areas for crop production, and detrimental effects of pests, diseases, and climate changes have required to breed new rice cultivars with high yield, accepted quality, but strong resistance to abiotic and biotic stresses. However, traditional breeding needs much time to breed a new cultivar, whereas the successful use of molecular breeding is still questionable. We have developed a novel mutation which allow to cross many rice cultivars together with low segregation, that allow to breed a new cultivar in only several cropping. The mechanism has been unknown, but we suggest that gene linkage may play a crucial role, of which the semi dwarf gene might be the center gene for gene linkage occurrence. The phenomenon of this possible gene linkage is contrary to Mendel rules, but it is promising to breed new rice cultivars, of which, the most elite genes in rice might be able to gather in a targeted rice variety.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.235-235
• /
• 2007

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.57-63
• /
• 2017

A coupled experimental-numerical study on shear fracture in concrete specimens with different geometries is carried out. The crack initiation, propagation and final breakage of concrete specimens are experimentally studied under compression loading. The load-strain and the strength of the specimens are experimentally measured, indicating decreasing effects of the shear behavior on the failure load of the specimen. The effects of specimen geometries on the shear fracturing path in the concrete specimens are also investigate. Numerical models using an indirect boundary element method are made to evaluate the crack propagation paths of concrete specimens. These numerical results are compared with the performed experiments and are validated experimentally.