• Nonlinear Functional Analysis and Applications
• /
• v.29 no.2
• /
• pp.527-543
• /
• 2024

In the realm of differential games and bioeconomic modeling, where intricate systems and multifaceted interactions abound, we explore the precision and efficiency of the Chebyshev Tau method (CTM). We begin with the Weierstrass Approximation Theorem, employing Chebyshev polynomials to pave the way for solving intricate bioeconomic differential games. Our case study revolves around a three-player bioeconomic differential game, unveiling a unique open-loop Nash equilibrium using Hamiltonians and the FilippovCesari existence theorem. We then transition to numerical implementation, employing CTM to resolve a Three-Point Boundary Value Problem (TPBVP) with varying degrees of approximation.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.423-429
• /
• 1997

We fabricated PLT thin films on ITO substrate for flat pannel display and investigated the characteristics, then we applicated to electroluminescent device and investigated application possibility. When we fabricated PLT thin films with substrate temperature of $500^{\circ}C$, and pressure of 30 mTorr, the relative deielectric constant and breakdown electricfield of PLT thin films were 120 and 3.2MV/cm. The electric resistivity was $2.0{\times}10^{12}{\Omega}{\cdot}cm$. PLT thin films had polycrystal structure of perovskite and pyrochlore at the higher substrate temperature than $450^{\circ}C$, and had good crystallinity at higher pressure. To use PLT insulator film and ZnS:Mn phosphor, we fabricated thin film electroluminescent device of ITO/PLT/ZnS:Mn/PLT/Al structure. At the result, threshold voltage was $35.2V_{rms}$ and brightness was $2400cd/m^{2}$ at $50V_{rms}$ and 1kHz. Maximum luminescence efficiency was 0.811m/W.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1070-1073
• /
• 2003

We have studied the characteristics of organic light-emitting diodes(OLEDs) with the PTFE buffer layer. The OLEDs have been based on the molecular compounds, N,N'-diphenyl-N,N'-bis (3-methylphenyl)-1, 1'- biphenyl-4, 4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinoline) aluminum (III) ($Alq_3$) as an electron transport and the Polytetrafluoroethylene (PTFE) as a buffer layer. The devices of structure were fabricated ITO/PTFE/TPD(40nm)/$Alq_3$(60nm)/Al( 150nm) to see the effects of the PTFE buffer layer in organic EL devices. The thickness of the PTFE layer varied from 0.5 to 10[nm]. We were measured Current-Voltage-Luminance Characteristics and Luminance efficiency due to the variation of PTFE thickness. the PTFE layer was reported that helped to enhance the hole tunneling injection and effectively impede induim diffusion from the ITO electrode. We have obtained an improvement of luminance efficiency when the PTFE thickness is 0.5[nm] is used. The improvement of efficiency of is expected due to a function of hole-blocking of PTFE in OLEDs.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.506-510
• /
• 2007

Vacuum deposited 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine (1-TNATA), a widely-used semiconductor material, is placed as a thin interlayer between indium tin oxide (ITO) electrode and a hole transporting layer (HTL) in OLEDs and a well-stacked 1-TNATA layer leads to stable and high efficiency devices by reducing the carrier injection barrier at the interface between the ITO anode and hole transport layers. According to Raman spectra, thermal annealing after deposition as well as electromagnetic field treatment during deposition lead to closer stacking of 1-TNATA molecules and resulted in molecular ordering. By thermal annealing at about $110^{\circ}C$, an increase in current flow through the film by over 25% was observed. Molecularly-ordered 1-TNATA films played an important role in achieving higher luminance efficiency as well as higher power efficiency of the multi-layered organic EL devices in the present work. Electromagnetic field treatment during deposition was less effective compared to thermal annealing

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.32.1-32.12
• /
• 2020

Objectives: To evaluate the polymerization efficiency of a matrix-modified bulk-fill composite, and compare it to a conventional composite which has a similar filler system. The degree of conversion (DC%) and monomer elution were measured over different storage periods. Additionally, fillers' content was examined. Materials and Methods: Cylindrical specimens were prepared, in bulk and incrementally, from Filtek Bulk Fill (B) and Filtek Supreme XTE (S) composites using a Teflon mold, for each test (n = 6). Using attenuated total reflection method of Fourier transformation infrared spectroscopy, DC% was measured after 24 hours, 7 days, and 30 days. Using high-performance liquid chromatography, elution of hydroxyethyl methacrylate, triethylene glycol dimethacrylate, urethane dimethacrylate, and bisphenol-A glycidyl dimethacrylate was measured after 24 hours, 7 days and 30 days. Filler content was examined by scanning electron microscopy (SEM). Data were analyzed using 2-way mixed-model analysis of variance (α = 0.05). Results: There was no significant difference in DC% over different storage periods between B-bulk and S-incremental. Higher monomer elution was detected significantly from S than B. The elution quantity and rate varied significantly over storage periods and between different monomers. SEM images showed differences in fillers' sizes and agglomeration between both materials. Conclusions: Matrix-modified bulk-fill composites could be packed and cured in bulk with polymerization efficiency similar to conventional composites.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.486-492
• /
• 2005

Into a no-conjugated polymer chain we have introduced side chains with a styrene-linked triphenylamine segment as a $\pi-electron$ donor, styrene-]inked aminobenzaldehyde segment as a tunable reactive -CHO group, and PM (4-(dicyanomethylene)-2-(tert-butyl)-4H-pyran) moiety as a $\pi-electron$ acceptor for red emitting materials. The thermal stability and the optical properties of the statistical copolymers have been studied. All the polymers were electrochemically active and showed electroluminescent emission at around 700nm. The EL device of P5-PM based on the sturcture of $ITO/PPV/polymer/BCP/Alq_3/Al$ showed a maximum brightness of $120cd/m^2\;at\;50mA/cm^2$ with an external quantum efficiency of $0.67\%$. It was possible to enhance the external quantum efficiency by balancing the charge recombination. A red-emitting polymer with high external quantum efficiency was developed by incorporating bifunctionality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1213-1220
• /
• 2010

This experiment evaluated the effects of dietary lysine restriction and energy density on growth performance, nutrient digestibility and meat quality of finishing pigs. A $2{\times}2$ factorial arrangement of treatments was utilized in a randomized complete block (RCB) design, and factor 1 was lysine restriction and factor 2 was energy density. The control diet was formulated to contain 3.265 Mcal of ME/kg, 0.75% lysine in the early-finishing phase and 3.265 Mcal of ME/kg, 0.60% lysine in the late-finishing phase and other nutrients met or exceeded NRC (1998) standards. Compared to the control diet (CON), lysine levels of experimental diets were restricted to 15% (treatment EL, EEL) or 30% (treatment ELL, EELL), whereas energy level of experimental diets was increased by 0.100 or 0.200 Mcal of ME/kg. A total of 100 crossbred pigs ([Yorkshire${\times}$Landrace]${\times}$Duroc), with average initial body weight of $58.47{\pm}1.42\;kg$, were allotted to 5 dietary treatments based on sex and body weight. Each treatment had 5 replicates with 4 pigs (two barrows and two gilts) per pen. ADG, ADFI and feed efficiency were calculated in an 8-week growth trial. In the late finishing period (5-8 weeks), pigs fed ELL or EELL diets had decreased ADG and feed efficiency (p<0.01), however, when the EEL diet was provided, a similar growth performance was observed compared to those fed the CON diet during the whole experimental period (p>0.05). In a metabolic trial, 15 pigs were used to evaluate the effect of dietary lysine restriction and energy density on nutrient digestibility. The digestibility of dry matter, crude fat and crude ash was not improved by restricting dietary lysine or energy density. However, crude protein digestibility was decreased (p<0.05) as dietary lysine was restricted. When dietary lysine was restricted, fecal nitrogen was increased whereas nitrogen retention was decreased. BUN concentration was affected by dietary lysine restriction; treatments ELL and EELL had higher BUN values than other treatments (p<0.01). Carcass characteristics and meat quality were measured when average body weight of pigs reached $107.83{\pm}1.50\;kg$. Treatment ELL had higher last rib backfat depth (p<0.05) than treatment CON, but ELL and EEL did not differ significantly. The ELL and EEL treatments had higher (p<0.05) subjective marbling score than treatment CON. Treatment EEL showed higher longissimus fat content than treatment EL and CON (p<0.01). The results indicated that finishing pigs fed a diet with 15% lysine restriction and 3.465 Mcal of ME/kg energy density had no detrimental effects on growth performance and N utilization, and could achieve substantial increases in marbling and longissimus fat content of pork.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.286-291
• /
• 2006

We studied possibility of mixing treatment of livestock wastewater and sewage using Phanerochaete chrysosporium PSBL-1. Our study showed that 97.6% of SS and 95% of T-P removal efficiency was achieved when 2 mL BF02(a coagulant) and 100 mL C-210EL(a cationic polymer) were added to the mixture(2:1, v/v) of livestock wastewater and sewage. We studied treatment characteristic of Phanerochaete chrysosporium PSBL-1, after were mixed pretreated wastewater and sewage by dillution ten times about livestock wastewater. The removal efficiency of NBDCOD(non-biodegradable COD), $NH_3-N$ and T-N was increased according to increase of pH. That is, T-N concentration of effluent was satisfied 60 mg/L by drain water waterqulity standard of livestock wastewater public treatment facilities with 35 mg/L from a lapse of five days at pH 6.7, 51 mg/L from a lapse of three days at pH 8 and 33 mg/L from a lapse of one day at pH 10. Moreover $COD_{Mn}$ concentration of effluent was satisfied 40 mg/L by drain water waterqulity standard of livestock wastewater public treatment facilities after a laps of one day at all pH. Organics and nitrogen concentrations of effluent were higher case with addition of V.A.(veratryl alcohol) than case without addition of V.A.(veratryl alcohol). $COD_{Mn}$ concentration of effluent satisfied drain water qulity standard of livestock wastewater public treatment facilities from a lapse of one day, when C/N rate(3:1) of influent was not controled. T-N satisfied that from a lapse of two days, when C/N rate was controled with $4{\sim}6$.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.291-294
• /
• 2010

In this study, we demonstrated high-efficiency blue organic light-emitting diodes (OLEDs) employing BCzVBi as a blue fluorescent dye doped into blue host material, DPVBi with various concentration. The optimized blue OLED device having high-efficiency was constructed with structure of NPB (500 ${\AA}$) / DPVBi:BCzVBi-6% (150 ${\AA}$)/$Alq_3$(300 ${\AA}$) / Liq (20 ${\AA}$) / Al (1000 ${\AA}$). The maximum luminescence of blue OLED was 13200 cd/$m^2$ at 13.8 V and current density and maximum efficiency were 26.4 mA/$cm^2$ at 1000 cd/$m^2$ and 4.24 cd/A at 3.9 V, respectively. Luminous efficiency shows two times higher than comparing with non-doped BCzVBi blue OLED whereas $CIE_{x,y}$ coordinate was similar with bare DPVBi blue OLED such as (0.16, 0.19). Electroluminescence of BCzVBi-6% doped blue OLED has two major peaks at 445 nm and 470 nm whereas pure DPVBi's blue peak appears at 456 nm and it is happened through endothermic Forster energy transfer by molecule's vibration between LUMO of DPVBi as host material and LUMO of BCzVBi as dopant in device.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1837-1842
• /
• 2010

Studies on alternative energy have been carried out for many decades because of the accelerated exhaustion of fuel. While the efficacy of solar cells is still low in comparison with that of nuclear power, solar cells have been highlighted as potential sources of alternative energy because they are environmentally friendly and have a source of unlimited energy, namely, the sun. In this study, the optimum efficiency of solar cells was simulated as a function of the incident angle of sunlight and the geometric shapes of patterns using MATLAB and MathCAD software. The foremost efficiency of the solar cell was found to be 1.10 when the thickness and width of the patterns were in the range 25-$50{\mu}m$ and 50-$100{\mu}m$, respectively. To achieve the 25 um thick layer, 100,000 cps silver paste and 500 um orifice tip has been successfully implemented with Micro-Dispensing Deposition Writing.