• Asian Pacific Journal of Cancer Prevention
• /
• 제13권2호
• /
• pp.521-525
• /
• 2012

Microsomal epoxide hydrolase (mEH) plays a significant role in the metabolism of numerous xenobiotics and is associated with several forms of cancer. Here, we investigated the role of mEH expression in bladder carcinogenesis, subsequent progression and recurrence. The expression of mEH was analyzed by Western blot in 50 bladder urothelial carcinoma and 20 normal epithelial tissues. There was a significantly higher mEH expression in the normal epithelium (P<0.05) and mEH expression was lower in high stage than in low stage tumors (P<0.05). Further, immunohistochmistry in 106 bladder urothelial carcinoma demonstrated mEH expression to be negatively correlated with histological grade, pT stage and recurrence (P<0.05). These findings suggest the important role of mEH in bladder carcinogenesis, cancer development and recurrence, providing support for efforts to develop mEH-based gene therapy.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.26-33
• /
• 2014

In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.310-312
• /
• 2007

Two metal cored composite wires were manufactured to satisfy AWS F7A4-EC-G specification. They were used to weld EH36 grade steels with three different fluxes. Variation of carbon, manganese, silicon, titanium, and boron contents which affect the weld metal strength in weld metal was investigated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.103-103
• /
• 2009

As the size of containership increased over 14,000TEU, thick steel plate with high strength has been used. The plate thickness increased over 70mm and yield strength of the steel plate was around $47kg_f/mm^2$. Many researchers reported that the thick welded plate has low crack arrest toughness. They noticed the crack arrest ability is dependent on the plate thickness. In other words, brittle crack propagates straightly along the welded line and make abrupt fracture in the thick plate which causes low $K_{ca}$. In this study, the other factors, especially welding heat input, to cause low crack arrest toughness was investigated for thick steel plate welds. EH grade steel plates were used in this study and 50 to 80 thick plates were tested to confirm thickness sensitivity. Electro gas welding (EGW) and flux cored arc welding (FCAW) were adopted to prepare the welded joints. Temperature gradient ESSO test was performed to measure $K_{ca}$ values with the variation of welding variables. As a result of this study, regardless of plate thickness, welding heat input to cause welding residual stress around crack path is a key factor to control the brittle crack propagation in welded joints.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.40-52
• /
• 1990

Fatigue behavior of the AH, DH and EH grade TMCP(Thermo-Mechanical Control Process) steels was studied. High cycle and low cycle fatigue tests were carried out for the weldment and base metal of each steel. The results showed that the fatigue limit at 2 * $10^6$ cycles was 33 to 37 kg/$mm^2$ for the base metal and 30 to 34 kg/$mm^2$ for the weldment. The ratio of fatigue limit to tensile strength for TMCP steels was 0.65 to 0.71, which was a value close to the upper limit for the ordinary steels. It was also found that the high cycle fatigue behavior of TMCP steels could be affected by the microstructures of base metal. It will be necessary to have fine structure for TMCP steels to increase the fatigue resistance. In low cycle fatigue test, the fatigue lifetime of AH and DH steels accorded well with the ASME best fit curve, while that of EH steel was considerably lower than the fatigue lifetime of the other steels. Fatigue resistance of the weldment made by high heat input(180kJ/cm) welding was not lower than that made by low heat input(80kJ/cm) welding in case of high cycle fatigue, but the high heat input welding decreased the fatigue resistance in case of low cycle fatigue.

• Asia pacific journal of information systems
• /
• 제12권1호
• /
• pp.1-16
• /
• 2002

Most of searching systems used by shopping-mall provide too much information for user requirements or fail to provide appropriate items reflecting customer's preference. This paper aims to design and implement the product searching systems based on customer preference which will enable efficient product selection in the internet shopping-mall. The proposed system consists of user/provider interface, searching and model agent, data management system, and model management system. Especially, we construct the searching pattern database to support fast search using association mining method. And this system includes the customer-oriented decision model which shows the highly preferred products. Input weight value per attribute and preference level should be needed to compute priority grade of preference.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.37-42
• /
• 2014

In this study, non-load-carrying fillet welded joints fabricated using EH grade-steel are evaluated with the structural stress approach. The thickness effect was investigated by a study on welded steel joints with thickness ranging from 25 to 80mm. As-welded joint for main plate thickness of 25 to 80mm, the fatigue strength is reduced gradually. On the other hand, in case of main plate thickness of 25 to 80mm, the structural stress concentration factor increases gradually. As a result, for structural stress approach, thickness effect is not required for correction. Based on these results, a new evaluation fillet welded joint for fatigue design purposes has been proposed FAT 125.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.617-625
• /
• 2003

Statement of problem : There are many studies focused on the effect of shape of futures on stress distribution in the mandibular bone. However, there are no studies focused on the effect of the abutment types on stress distribution in mandibular bone. Purpose : The purpose of this study is to investigate the effect of three different abutment types on the stress distributions in the mandibular bone due to various loads by performing finite element analysis. Material and method : Three different implant systems produced by Warantec (Seoul, Korea), were modeled to study the effect of abutment types on the stress distribution in the mandibular bone. The three implant systems are classified into oneplant (Oneplant, OP-TH-S11.5). internal implant (Inplant, IO-S11.5) and external implant (Hexplant, EH-S11.5). All abutments were made of titanium grade ELI. and all fixtures were made of titanium grade IV. The mandibular bone used in this study is constituted of compact and spongeous bone assumed to be homogeneous, isotropic and linearly elastic. A comparative study of stress distributions in the mandibular bone with three different types of abutment was conducted. Results : It was found that the types of abutments have significant influence on the stress distribution in the mandibular bone. It was due to difference in the load transfer mechanism and the size of contact area between abutment and fixture. Also the maximum effective stress in the mandibular bone was increased with the increase of inclination angle of load. Conclusion : It was concluded that the maximum effective stress in the bone by the internal implant was the lowest among the maximum effective stresses by other two types.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.55-55
• /
• 2009

FGB(Flexible Glasswool Backing) Submerged Arc Welding has been one of the main welding processes for one side butt welding in shipbuilding industries, which can efficiently improve the welding productivity by the addition of a supplementary filler metal into the molten weld pool. As recent ships have become larger in size, the application of high tensile and higher grade of steels has been continuously increased. Single pass FGB SA welding process accompanies such a high heat input when welding thick plates that the mechanical properties of weld metal can be dramatically degraded. This study has been performed in order to obtain high toughness and tensile properties of high heat input FGB SA welds, and to evaluate the effect of alloy elements on their mechanical properties. To complete welding 25mm-thick EH36 grade steel plate by single pass, 1.2mm diameter and 1.0mm long cut wires has been distributed in the groove before welding, and three different test coupons have been made using C-1.5%Mn, C-1.8%Mn-0.5%Mo, and C-1.4%Mn-1.7%Ni cut wires to investigate the influence of nickel(Ni) and molybdenum(Mo) on the mechanical properties of welds. Test results showed that the addition of Ni and Mo effectively promotes the formation of Acicular Ferrite(AF), while significantly reducing the amount of Grain Boundary Ferrite(GBF) in weld metal microstructures, which resulted in a beneficial effect on low temperature impact toughness and strength.

• 자원환경지질
• /
• 제30권4호
• /
• pp.379-393
• /
• 1997

Geology of the Zbezkazgan copper deposit in Kazhkstan is mainly composed of Permian and Carboniferous sedimenary rocks in which copper minerals are mainly contained in grey sandstone of Carboniferous age. There are 28 layers of copper ore bodies in Zbezkazgan suite. Thickness of the ore bodies ranges from one to 35 meters, grade of the crude ore ranges from 2 to 5 wt % Cu and the extension of the orebodies is 5 to 7 km. Microscopic study on specimens from the Zbezkazgan ore deposit has exposed clues to understand the origin of this deposit. Alternatively deposited grey sandstone and red sandstone are mainly composed of quartz and feldspar grains. A big difference between the grey sandstone and the red sandstone is in grain size, the former is larger than the latter. Chalcocites as main copper minerals have cemented through grain boundary. It is assumed that quartz, feldspar and copper were derived from granitoid in which copper mineralization had taken place before exposing to weathering. The chalcocites were precipitated by a sudden change of geochemical condition (Eh, pH, temperature, etc.) of fluid which had carried quartz, feldspars, copper ions and sulphate during formation of grey sandstones. The copper ions and sulphate were stable in fluid during sedimentation of oxidation environment, however, the copper ions were no more stable at the reduced environment and changed to stable forms to precipitate copper minerals by reaction of copper ions and hydrogen sulfides. This chemical precipitation of copper minerals in the sandstone attributes to the assumption of hydrothermal origin on this sedimentary origined deposit.