• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.26-38
• /
• 1991

The fundamental conditions for growing $r-6Bi_2O_3{\cdot}SiO_2$(BSO) single crystal plates by EFG(Edge-defined Film-fed Growth) method, were investigated and characterization, quality test, property measurement were performed for obtained BSO single crystal plates. The opti$\mu$ growing conditions determined in this study were as follows: ${\cdot}$temperature gradient;$24^{\circ}C/cm$ ${\cdot}$pulling rate;2.0mm/h. BSO Single crystal plates grown at the above optimum conditions did not include secondary phase or grain boundary and were confirmed as single crystals by X-ray analysis. IT was found that the single crystal plates had <100> growth direction. G defects, ie pore, void inclusion, striation, were not detected in the single crystal plate under polarizing microscope but dislocations(microscopic defect) were found and dislocation density was $5.1\times10^5/cm^2$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.85-94
• /
• 2002

In this study an adaptive node generation procedure in the Element-free Galerkin (EFG) method using bubble-meshing technique is Proposed. Since we construct the initial configuration of nodes by subdivision of background cell, abrupt changes of inter-nodal distance between higher and lower error regions are unavoidable. This unpreferable nodal spacing induces additional errors. To obtain the smooth nodal configuration the nodal configurations are regenerated by bubble-meshing technique. This bubble meshing technique was originally developed to generate a set of well-shaped triangles and tetrahedra. In odder to evaluate the effect of abrupt changes of nodal spacing, one-dimensional problems with various nodal configurations mere investigated. To demonstrate the performance of proposed scheme, the sequences of making optimal nodal configuration with bubble meshing technique are investigated for several problems.

• Korean Journal of Veterinary Research
• /
• v.42 no.1
• /
• pp.35-43
• /
• 2002

Cryopreservation is commonly used for an efficient utilization of semen, oocytes and embryos but has disadvantage in the survival, development of the post-thawed eggs. The high risk in the survival, development of eggs after thawing is thought to be caused by inappropriate internal regulation of $Ca^{2+}$ and/or formation of intracellular ice crystals. In this experiment, we tested whether the $Ca^{2+}$ current (iCa), a decisive factor to $Ca^{2+}$ entry, was altered in post-thawed oocytes by using whole cell voltage clamp technique. The quality and survival rates of the oocytes derived from both fresh and frozen groups were examined by morphology and FDA-test. Vitrified oocytes (VOs) were incubated for 4 hr after thawing and then donated to this experiment. Ethyleneglycol-ficoll-galactose (EFG) was used as a cryoprotectant for vitrification. The membrane potential was held at -80 mV and step depolarizations of 250 ms were applied from -50 mV to 50 mV in 10 mV increments. The survival rates showed a higher in VOs vitrified with EFG containing $Ca^{2+}$ than in VOs vitrified with EFG under the $Ca^{2+}$-free condition (82.0% vs 14%). In group with/without $Ca^{2+}$, the survival rates were significantly (P<0.01) difference. In the fresh metaphase II oocytes (FOs), current-voltage (I-V) relationship showed that iCa began to activate at -40 mV and reached its maximum at -10 mV. With same voltage pulses, inward currents were elicited in VOs. I-V relationships observed in VOs were similar to those in FOs. Time constants of activation and inactivation of the inward current shown in VOs were not different to those in FOs. This accordance in I-V relations and time constants in FOs with those in VOs indicates that the inward currents in FOs are unaltered by vitrification and thawing. Therefore, vitrification with EFG does not play as a factor to deteriorate $Ca^{2+}$ entry across the membrane of the oocytes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.371-378
• /
• 2000

In this study an adaptive node generation procedure in the Element-free Galerkin (EFG) method using bubble-meshing technique is proposed. Based on the error function that obtained by projected error estimation method, the initial node arrangement is defined along the background cell that is used in the numerical integration. To obtain the smooth nodal configuration, the nodal configuration are regenerated by bubble-meshing technique. This bubble meshing technique was originally developed to generate a set of well-shaped triangles and tetrahedra. Its basic idea is packing circles or spheres, called bubble, into the specified area or space naturally using some dynamic equations with attracting and repelling force. To demonstrate the performance of proposed scheme, the convergence behaviors are investigated for several problems.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.209-225
• /
• 1999

Detailed description of the crystal growth methods permitting one to obtain complicated shape crystals from the melt is given. The variable shaping technique provides the growth of crystals with a discrete altering cross-section configuration during crystallization. The dynamic local shaping technique enables one to grow items with a continuous alteration of the side surface profile by a preset program.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.324-331
• /
• 2000

In this study, a new algorithm analyzing dynamic crack propagation problem by the coupling technique of Meshfree Method and Finite Element Method is proposed. The coupling procedure of two methods is presented with a short description of Meshfree Method especially, Element-free Galerkin (EFG) method. The elastodynamic fracture theory is presented, and a numerical implementation procedure for dynamic fracture analysis by Meshfree Method is also discussed. A couple of dynamic crack propagation problems illustrate the performance of the propsed technique. The accuracy of numerical solutions by the developed algorithm are compared with those of analytical solutions and experimental ones.

• Structural Engineering and Mechanics
• /
• v.59 no.5
• /
• pp.901-920
• /
• 2016

MeshFree methods have become popular owing to the ease with which high stress gradients can be identified and node density distribution can be reformulated to accomplish faster convergence. This paper presents a strategy for nodal density refinement with strain energy as basis in Element-Free Galerkin MeshFree technique. Two popular flat plate problems are considered for the demonstration of the proposed strategies. Issue of integration errors introduced during nodal density refinement have been addressed by suggesting integration cell refinement. High stress effects around two symmetrical semi-circular notches under in-plane axial load have been addressed in the first problem. The second considers crack propagation under mode I and mode II fracture loading by the way of introducing high stress intensity through line crack. The computational efficacy of the adaptive refinement strategies proposed has been highlighted.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.1-4
• /
• 2008

The growth of composite-structured Nd:$GdVO_4$ single crystal rods by the double die EFG method is reported. Two crucibles are combined with an outer and inner die for ascending of different melt. The composite-structured Nd:$GdVO_4$ single crystal rods with a length of 50 mm and an outer diameter of 5 mm including of inner Nd-doped core region with diameter 3 mm were grown successfully. Nd distribution in the, radial direction has graded profile from result of EPMA. Absorption coefficient in the core region at 808 nm was $42cm^{-1}$. Finally, we demonstrated the laser oscillation using our composite crystal and 2-W output was obtained.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.315-322
• /
• 2000

In this study, an algorithm analyzing dynamic mutiple-crack propagation problem by Meshfree Method is proposed. A short description of Meshfree Method especially, Element-free Galerkin (EFG) method is presented and the elastodynamic fracture theory is summarized. A numerical implementation algorithm for dynamic analysis by Meshfree Method is discussed and an algorithm for mutlple-crack dynamic propagation is also presented. A couple of numerical examples of dynamic crack propagation problem illustrate the performance of the proposed technique. The accuracy of the algorithm is studied in the first example by being compared with experimental results, and the applicability and efficiency of the developed algorithm is studied in the second example.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

The microstructural features and mechanical behavior of directionally solidified $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fibers after extended beat treatment in oxidizing environment were investigated. The fiber was grown continuously by an Edge-defined Film-fed Growth (EFG) technique. The microstructure was characterized using X-Ray Diffraction (XRD) and Scanning Electron Microscopy(SEM). The microstructure of the fiber in the as-fabricated state consists of highly oriented colonv and fine lamellar microstructure along the fiber axis. Tensile strength of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber remained unchanged with heat treatment at temperatures between $1200^{\circ}C$ and $1500^{\circ}C$ up to 300h. The weibulls modulus remained fairly constant after extended thermal exposure. The fracture toughness and crack propagation behavior were investigated. The fracture toughness ($K_{1C}$) of the $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber in the as-fabricated state were measured to be 3.6 ${\pm}$ 0.5 MPa${\cdot}m^{1/2}$ by an indentation technique and 2.2 ${\pm}$ 0.2 MPa${\cdot}m^{1/2}$ by assuming elliptical flaw of a semi-infinite solid, respectively. The $(Y_2O_3)ZrO_2/Al_2O_3$ eutectic fiber showed a radial (Palmqvist) crack type and exhibited an orthotropic crack growth behavior under 100 g load.