• Development and Reproduction
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2014

We investigated the process of yolk absorption in Korean rose bitterling, Rhodeus uyekii, and determined the changes in its morphometric characteristics. The R. uyekii from 1 days post hatching (DPH) to 21 DPH, the eye diameter (ED) was 5.4 at 5 DPH. Thereafter, the ED/total length (TL) ratio increased to 10.7 at 21 DPH (p<0.05). The yolk length (YL) decreased from 95.4 to 1.1 by 21 DPH, and this rate of decrease was greater than that for any other dimension (p<0.05). 12 morphometric dimensions/TL for the R. uyekii were measured at each sampling day from 21 DPH to 170 DPH. At just hatching, the average TL and BW were $6.1{\pm}0.09mm$ and $4.9{\pm}0.07mg$, respectively. At 53 DPH, the average TL was $12.9{\pm}0.28mm$ and the average BW was $14.7{\pm}0.72mg$; the total length growth equation was $TL=5.507e^{0.038t}$ ($R^2=0.916$). Further, the body weight growth equation was $BW=3.3647e^{0.0296t}$ ($R^2=0.9354$). The dimensions with regard to body depth showed the greatest growth rates in the external characteristics of the fish (p<0.05). The patterns of the morphometric characteristics measured in this study can be classified in three ways. The patterns were shown to be increased (y=0.0992x+12.07, $R^2=0.8333$), decreased (y=-0.0569x+42.029, $R^2=0.8395$) or maintained (y=0.005x+18.263, $R^2=0.3678$) from 21 DPH to 170. These results will provide useful indices for the successful rearing of the R. uyekii.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.25-37
• /
• 1999

positron annihilation Lifetime Spectroscopy has been extensively applied in recent years to investigate the free volume in polymers owing to the capability of the electron-positron bound system (positronium) to probe the typical size of sub-nanometric cavities among the macromolecular chains. In this paper we show recent results obtained through this technique in some amorphous polymeric mem-branes(olyurethanes. PUs and polytrimethilsylilpropine PTMSP) after a brief survey of the general features of the annihilation process as well as of the experimental apparatus. Lifetime of o-ps decay({{{{ tau _3}}}}) in PUs increases going from sub {{{{ TAU _g}}}} to over {{{{ TAU _g}}}} temperatures following a sigmoid curve. The coefficient of dilatation of the free volume fraction is shown to be the sum of two contributes due to the variation with T of the number of holes and of their mean volume. PAL spectrum of PTMSP freshly prepared shows four lifetime components: {{{{ tau _3}}}} and {{{{ tau _4}}}}: only are useful for free volume study. Two kinds of holes of different equivalent radius are reported ({{{{ gamma _s}}}} 4.60 nm and {{{{ gamma _1}}}} 0.754) The equivalent volume does not change in a range of 100 K. however the physical aging increases density and decreases oxygen permeability while {{{{ gamma _s}}}} goes down to 0.374 and r1 to 0.735 The number of holes obtained from the intensities{{{{ IOTA _3}}}} and {{{{ IOTA _4}}}} of PAL spectra decreases with aging 21.7% and 3.5% for large and small holes respectively.

• Quality Improvement in Health Care
• /
• v.20 no.1
• /
• pp.12-24
• /
• 2014

Objectives: The aim of this study was to explore whether emergency bell could shorten door to electrocardiograms (ECG) time in chest pain patients presenting to emergency department (ED) by self-transport. Methods: This was a planned 6-month before-and-after interventional study design. We set up the emergency bell in walk-in patients' waiting room. Prior to the change, patients were triaged before an ECG was obtained. In new process, as soon as patient with chest pain push the emergency bell, emergency physicians examined patient and prioritized performing ECG. We analyzed door to electrocardiograms (DTE) times for patients with chest pain and ST segment elevation myocardial infarction (STEMI) patients between two periods. Results: During the enrollment period, a total of 63 patients called emergency bell. The median DTE time was 6 min (interquartile range: 3.0 - 9.0) and 82.5% received an ECG within 10 minutes, and only three patients were STEMI. DTE time in patient with chest pain was not different between two periods (p=0.980). Before intervention period, 15 walk-in patients admitted in ED for STEMI and 53.8% of STEMI patients received an ECG within 10 minutes. After intervention period, total 19 walk-in patients admitted in ED for STEMI. Of these, 89.5% met the time requirement. Conclusion: Because a small portion of patients with chest pain activated the emergency bell, new strategy for promotion of emergency bell must be needed.

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2013

IEC publications have applied in many countries all over the world such as Europe or Japan and these also have been published as in dustrial standards (KS) and notifications of Korea Food and Drug Administration (KFDA) in Korea. As the general standard of IEC 60601 series for medical electric (ME) equipment was revised as $3^{rd}$ edition in 2005, additional and particular standards have been revised or established newly. Under these circumstances, it is importance for manufacturing and assembling companies or authorized testing companies to understand the trend for revisions of IEC publications. Therefore in this study, the latest version of 3 IEC standards related to medical X-ray equipment : IEC 60601-2-44 for X-ray equipment for computed tomography (CT), IEC 60601-2-45 for mammographic X-ray equipment and IEC 60601-2-54 for X-ray equipment for radiography or radioscopy were covered and analyzed for trends and features accompanied by revision based on IEC 60601-1 $3^{rd}$ Ed. As KFDA notifications in force have referred to the particular standards based on 2nd edition of IEC 60601-1, those revised version of 3 particular standards were compared to KFDA notifications in force. The features of the latest standards applying IEC 60601-1 $3^{rd}$ Ed were shown as following: 1) Requirements for mechanical hazards, especially (motorized) moving parts were emphasized. 2) Indication and recording of patient dose were required. 3) Risk management process was introduced and enabled to monitor potential risks systematically. 4) DR system (digital radiography system) as well as analogue system (film-screen system) was included in the scope. Presently, KFDA will revise the notifications applying the particular standards based on IEC 60601-1 $3^{rd}$ Ed in a few years. Therefore the features of particular standards applying IEC 60601-1 $3^{rd}$ Ed was expected to help manufacturers, assemblers or testing companies of medical electric equipment understand IEC publications or KFDA notifications slated to be published.

• The Korean Journal of Elementary Counseling
• /
• v.6 no.1
• /
• pp.19-46
• /
• 2007

The Purpose of this study is to investigate and suggest a personality education approach for solving interpersonal problems of elementary school students that elementary school teachers are now confronted with. In this study, first of all, the actual conditions of interpersonal problems of elementary school students were examined focusing on interpersonal aggressions(violence and victim). The features and problems of existing approaches for solving interpersonal problems of elementary school students were indicated. Although existing approaches for solving interpersonal aggression problems took temporary and external changes, they failed to notice psychological hurts that victims and aggressive victims got. As a fundamental and systematic way for overcoming problems of existing approaches, forgiveness education based on empirical-scientific forgiveness researches was discussed. The Purpose of forgiveness education is to make victims(aggressive victims) overcome the negative responses derived from interpersonal conflict(hurts and victims) and to facilitate them to response positively through experiencing forgiveness psychological process. Lastly, necessary assignments and topics to use forgiveness education as an effective personality education approach were discussed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2000

In this paper based on geometric optics and geometric modeling aspheric surface of the side mirror mold with dead angle reduced have been designed and machined in a CNC machining center, Surface roughness of the mold was evaluat-ed by usin the surface shaping system. Surface generating simulation of a ball endmill process is investigated. Through the simulation based on the surface-shaping system 3-D engineered surfaces and properties of engineered surfaces are obtained, Computer simulation provides the effective working conditions through the prediction of geometric properties of engineered surfaces. The rear view mirror and room mirror play important role on the safe driving condition as a observation of environment but the rear view mirror can not provide complete information of driving environments due to the existence of the dead angle. The analysis on the shape of formed mirror shows that the proposed me？ improves range of a driver's sight.

• Fashion Information and Technology
• /
• v.2
• /
• pp.22-32
• /
• 2005

Sourcing Simulator is specialized form of software capable of providing great insight into merchandising decision making. It is relatively easy to learn and operate by reading the help menus, experimenting with inputs, and critically analyzing outputs. 1 see that it has great potential in a training program for new merchandisers to help them absorb the complexity of the numbers they must effectively use. The Sourcing Simulator, Version 1 that accompanies my textbook, Merchandising: Theory Principles, and Practice, 2nd ed. is the least complex version available. Two versions are available from [TC]2 - Retail version and The Retail/ Manufacturing version. The Retail Version is very similar to the Version 1. The Retail/ Manufacturing Version includes analysis of processes and costs in the manufacturing process as well as the merchandise planning component that we have discussed here. Sourcing Simulator is developed at North Carolina State University by Dr. Russ King, and available from Textile Clothing Technology Corporation $[TC]^2$, Cary, North Carolina.

• Research in Mathematical Education
• /
• v.14 no.3
• /
• pp.211-218
• /
• 2010

It is a truism that mathematics is about relations (cf. [Halford, G. S. (1999). The properties of representations used in higher cognitive processes: Developmental implications. In: Sigel, I. E. (Ed.), The Development of Mental Representation: Theories and Applications (pp. 147-168). Mahwah, New Jersey: Erlbaum]). In this article we are considering few problems related to the Viviani's and Routh's Theorems. All Problems are connected by the relation which exists between the distances of the point inside the triangle to it sides. We show how reasoning about the relations could lead the student's problem solving process and give easy to understand solutions of the problems. Among the problems being considered are the proof of the Converse to Viviani's Theorem, the formulas for areas of all figures formed by the sides of triangle and its cevians.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.23-23
• /
• 2003

PCB 회로기판용 전해동박은 드럼형태의 음극 표면에 연속적으로 전기 도금한 후 벗겨내어 권취하는 원박 제조공정과 접착성, 내열성, 내화학성, 방청성을 부여하기 위한 후처리 공정으로 나눈다. 이 후처리 공정 중 동박과 수지와의 접착성을 부여하기 위해 일반적으로 전기도금을 통해 조화(Nodule)처리를 실시하는데, 최근 LCD, PDP 등의 평판 디스플레이 장치의 구동칩이 실장되는 TCP용 동박의 경우 2$\mu\textrm{m}$이하의 낮은 조도(Rz)와 함께 높은 접착강도(Peel Strength)가 요구되고 있다. 그러나, Reel to Reel 형태의 연속도금공정으로 진행되는 조화처리에 있어 일반 비이커 실험결과는 실제 양산공정과의 재현성에 있어서 상당한 제한성이 노출된 바 있다. 이에 본 연구에서는 Reel to Reel 형태의 연속도금공정을 모사 할 수 있는 실험장치를 설계, 제작하여 동박표면의 노듈형성에 있어 주요인자를 정량적으로 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1593-1600
• /
• 2000

A method based on frequency domain approaches is presented for the nonlinear parameters identification of structure having nonlinear joints. The finite element model of linear substructure is us ed to calculating its frequency response functions needed in parameter identification process. This method is easily applicable to a complex real structure having nonlinear elements since it uses the frequency response function of finite element model. Since this method is performed in frequency domain, the number of equations required to identify the unknown parameters can be easily increased as many as it needed, just by not only varying excitation amplitude but also selecting excitation frequencies. The validity of this method is tested numerically and experimentally with a cantilever beam having the nonlinear element. It was verified through examples that the method is useful to identify the nonlinear parameters of a structure having arbitary nonlinear boundaries.