• 제목/요약/키워드: ECO-glass

검색결과 108건 처리시간 0.04초

Preparation and Dissolution Properties of the Eco-glass Fertilizer containing Trace Elements

  • Lee Hoi Kwan;Hwang Sheng Jean;Kang Won Ho
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2004년도 추계학술대회
    • /
    • pp.96-98
    • /
    • 2004
  • At the previous papers, we showed that K2O-CaO-P2O5 glasses had a solubility in air so that they could be used for glass fertilizer. In this work, we fabricated the Eco-glass fertilizer containing trace elements such as B, Mg, Zn, Fe, Cu, Co, and Mo by a melt-quenching process and the dissolution properties of these glasses were investigated with pH meter and ICP analyzer. In case of the glasses containing the trace elements, effect of trace elements on the dissolutions is not obvious and ignorant the stability of mother glass. Also, the dissolution amounts of each trace elements depend on the mother glass composition and the quantity of each trace element, and mother glasses determined the dissolving velocity of chemical elements.

  • PDF

나노 실리카의 분무건조를 이용한 중공구 입자 제조와 실리카중공구의 열전달 특성 (Preparation of Hollow Silica by Spray Drying of Nano Silica Particles and Its Heat Transfer Property)

  • 윤찬기;임형미;차수진;김대성;이승호
    • 한국재료학회지
    • /
    • 제22권10호
    • /
    • pp.531-538
    • /
    • 2012
  • Hollow silica spheres were prepared by spray drying of precursor solution of colloidal silica. The precursor solution is composed of 10-20 nm colloidal silica dispersed in a water or ethanol-water mixture solvent with additives of tris hydroxymethyl aminomethane. The effect of pH and concentrations of the precursor and additives on the formation of hollow sphere particles was studied. The spray drying process parameters of the precursor feeding rate, inlet temperature, and gas flow rate are controlled to produce the hollow spherical silica. The mixed solvent of ethanol and water was preferred because it improved the hollowness of the spheres better than plain water did. It was possible to obtain hollow silica from high concentration of 14.3 wt% silica precursor with pH 3. The thermal conductivity and total solar reflectivity of the hollow silica sample was measured and compared with those values of other commercial insulating fillers of glass beads and $TiO_2$ for applications of insulating paint, in which the glass beads are representative of the low thermal conductive fillers and the $TiO_2$ is representative of infrared reflective fillers. The thermal conductivity of hollow silica was comparable to that of the glass beads and the total solar reflectivity was higher than that of $TiO_2$.

친환경 납추 대체소재 개발 (Development of Eco-friendly Lead Substitute Materials)

  • 권진욱;송희진;황대연;김혜성
    • 열처리공학회지
    • /
    • 제35권3호
    • /
    • pp.130-138
    • /
    • 2022
  • In this study, the characteristic of an amorphous fishing weight material according to controlling the alloy type and alloy composition of the glass forming agent added in PbO2 oxide was investigated. According to the experimental, when the glass forming agent of 15wt%SiO2-1wt%MgO content was added in β-PbO2, an amorphous fishing weight substitute having the lowest friction coefficient, excellent corrosion resistance and durability was obtained. The cell number of PbO2-15wt%SiO2-1wt%MgO sample incubated in cell culture fluid tended to hardly decrease even after a lapse of 24 hours, It means that the fabricated PbO2-15wt%SiO2-1wt%MgO sample is significantly less-toxic and harmless to the human body, unlikely to metallic lead. It is considered that an fabricated amorphous fishing weight substitute proved to have a potential as an eco-friendly material with little marine pollution.

생태건축 0번지의 자연에너지 효과에 관한 연구 (A Study on the Natural Energy Effect about the Address No.0 of Eco-friendly Architecture)

  • 이시웅;강병호;임상훈;최승희
    • KIEAE Journal
    • /
    • 제3권3호
    • /
    • pp.19-25
    • /
    • 2003
  • The Address No.0 of Eco-friendly Architecture offers unique experience for those who visit the place to envisage the future architecture where nature, human and building exist in harmony. It is open to the general public including the students of elementary and secondary schools. This house has been built to provide opportunities for the general public to experience eco-friendly architecture. It's floor area is 42 pyung($140m^2$) and the overall site has the area of 180 pyung($600m^2$). The following illustrates some of its prominent features : ${\bullet}$ Remodeling of a traditional Korean residence ${\bullet}$ Application of passive solar systems ${\bullet}$ Use of clerestory windows and daylighting systems(washroom and machine room) ${\bullet}$ Operation of solar water heaters with flat plate collectors ${\bullet}$ Construction of Biotop(small ecological world) ${\bullet}$ Water circulation for Biotop by photovoltaic(150W) and wind power(400W) generation ${\bullet}$ Outdoor hot water supplied by all-glass evacuated solar tubes. Through this Address No.0 of Eco-friendly Architeture conclusions are as followings. 1. The array of tubes in collector has the best nice in that the number of tube is nine and the tilt angle is the latitude $+20^{\circ}$. 2. The thermal performance of the all-glass solar vacuum collector was excellent than of the flate-plate solar collector. 3. The adaption of new small wind power systems to buildings were proved to produce a profit if it is considered the expense of environment improvement and the wind speed increasing according to rise of building hight.

물질전과정평가를 이용한 터치스크린패널용 화학강화유리에 대한 환경성 평가 (Environmental Assessment of Chemically Strengthened Glass for Touch Screen Panel by Material Life Cycle Assessment)

  • 이나리;이수선;김경일;홍태환
    • 청정기술
    • /
    • 제18권3호
    • /
    • pp.301-306
    • /
    • 2012
  • 급성장하고 있는 태블릿 PC와 스마트 폰과 같은 모바일 기기들은 제품 표면 보호를 위해 강한 소재인 터치스크린패널을 장착하고 있다. 따라서, 화학강화유리의 수요는 증가하게 되었고, 수요가 증가함에 따라 화학강화유리의 폐기량도 증가하게 되었다. 이 연구의 목적은 물질전과정평가(material life cycle assessment, MLCA) 기법을 사용하여 터치스크린패널에 사용되는 화학강화유리의 환경영향평가를 하는 것이다. MLCA의 소프트웨어로는 그란타의 씨이에스(CES), 시마프로(SimaPro), 가비(Gabi)를 사용하였다. 씨이에스 소프트웨어(CES software)를 통하여 2.7, 5.7, 10.3 inch 두께의 화학강화유리의 환경영향평가를 2가지 경우(폐기, 재사용)를 고려하여 수행하였다. 그 결과, 2.7, 5.7, 10.3 inch 화학강화유리를 재사용할 경우에 사용되는 에너지 값과 $CO_2$값은 폐기할 경우에 비해 약 51.4%, 46.6% 감소하는 것을 확인하였다. 시마프로 소프트웨어(SimaPro software)를 통해서는 11가지 영향범주를 평가하였는데, 11가지 영향범주 중에서 화석연료(fossil fuels), 무기물(inorganics)과 기후변화(climate change)가 주된 환경부하의 원인으로 나타났다. 그리고 가비(Gabi) 소프트웨어를 통해서 환경영향의 주된원인이 안티몬(antimony), 불화수소(hydrogen fluoride)라는 것을 알 수 있었다.

창호 유리의 단열필름 시공에 따른 생애주기비용 비교 분석 (A Comparative Analysis of Life Cycle Cost on the Window Glass and the Insulation Film Coated Glass for Window)

  • 정민구;김광희
    • 한국건축시공학회지
    • /
    • 제14권6호
    • /
    • pp.583-590
    • /
    • 2014
  • 본 연구에서는 경제적인 창호공사 방안을 확인하기 위해 단열필름이 시공된 창호유리와 일반유리의 생애주기비용을 분석하여 비교하고자 하였다. 이를 위해 Window 6.3과 ECO2-OD 시뮬레이션 프로그램을 사용하여 유리 유형별 창호의 열성능 데이터를 측정하고 사례 건물에 적용하여 냉 난방 유지비용 및 LCC를 산출하여 경제성을 비교하였다. 연구결과 단열필름을 추가적으로 시공함으로써, 냉 난방 유지비용 측면에서는 하절기 태양열이 실내로 투과하는 것을 막아 냉방비용 절감 효과가 있지만, 이로 인해 동절기에는 난방비용이 증가하는 것으로 나타났다. 생애주기비용 측면에서 볼 때, 냉방비용 절감 효과가 난방비용 증가량과 필름 시공 및 수선으로 발생하는 추가비용을 상쇄하지 못하기 때문에 단열필름의 시공은 적절한 방법이 아니라고 할 수 있다.