• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.44-52
• /
• 2014

In this study, the influence of the near field, far field and radiation directivity of microstrip patch antenna when is used mushroom EBG(Electromagnetic Band Gap) as ground is investigated. Using characteristic of dispersion diagram of mushroom EBG, we calculated forbidden band(2.36GHz-2.85GHz) given mushroom type EBG microstrip antenna(2.45GHz) having 2-layer EBG that is operating within forbidden band. In oder to conform performance enhancemen of antenna using EBG ground, we have compared with the antenna using PEC(Perfect Electric Conductor) ground. We could know about 2.74dB increment of the radiation directivity, because EBG can suppress surface wave that is generated at interfaces of the dielectrics-conductor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1601_1602
• /
• 2009

본 논문은 SSN(Simultaneous Switching Noise) 이 유전체를 통해 다른 시스템에 유기되는 것을 막기 위한 방법인 EBG(Electromagnetic Band-Gap)에 관한 연구이다. 이에 대한 EBG 구조를 설계하기 위해 PDN(Power Delivery Network)에 주기적인 패턴을 삽입한다. 패키지에 EBG 구조를 적용하기 위해 인쇄 회로기판 범위에서 연구되었던 구조를 변형 및 개조하여 EBG 구조가 내포하고 있는 필터의 차단 주파수의 범위를 넓히며 차단 시작 주파수를 1GHz 아래로 낮추는 소형화 방법을 모색한다. 이 연구에서 실시할 EBG 구조에 대한 간단한 고찰과 인쇄 회로 기판에 적합한 AI-EBG(Alternating impedance Electromagnetic Band-Gap) 구조를 이용한 EBG 의 소형화에 대해 언급하고, 소형화를 위한 3-D EBG 의 설계구조에 대해 설명한다. 그리고 저주파에서 차단특성을 높이기 위한 방법으로 3-D EBG를 사용하고 AI-EBG와 비교하여 차단특성의 변화를 Full-wave 시뮬레이션과 측정으로서 비교한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.67-78
• /
• 2009

Radiation characteristics of microstrip patch antennas integrated with mushroom-like EBG structures in all directions and length direction on a substrate with the relative dielectric constant of 10 are systematically analyzed. As the substrate thickness increases, the effect of the surface wave on the input impedance and radiation pattern of a patch antenna increases. The effect of EBG structures on the input impedance of a patch antenna is negligible when the distances between EBG structures and the center of a patch antenna are 0.4 ${\gamma}_0$, 0.2 ${\gamma}_0$ and 0.1 ${\gamma}_0$ for the substrate thickness of 3.2 mm, 1.6 mm and 0.8 mm, respectively. The forward radiation is improved due to the suppression of surface wave when the periods of EBG structures integrated are larger than 2, 2, 3 periods for the substrate thickness of 3.2 mm, 1.6 mm and 0.8 mm, respectively. The effects of EBG structures on the radiation characteristics of a patch antenna integrated with EBG structures in all directions and length direction are similar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.933-939
• /
• 2008

In this paper, a new composite electromagnetic bandgap(EBG) structure using magnetic materials is proposed for simultaneous switching noise(SSN) suppression in the high-speed digital circuits. The proposed EBG structure has periodic unit cells of square-patches connected by spiral-shaped bridges. The magnetic materials are located on the unit cells of spiral-shaped EBG. The real part of the permeability shifts bandgap to the lower frequency region due to the increased effective inductance. The imaginary part of the permeability has magnetic loss that decreases parasitic LC resonance peaks from between the unit cells. As a result, the proposed structure has the lower cut-off frequency compared with conventional EBG structure and -30 dB SSN suppression bandwidth from 175 MHz to 7.7 GHz. The proposed structure is expected to improve the power integrity and reduce the size of the EBG power plane.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.162-169
• /
• 2006

A Micorstrip Bandpass Filter Using DBRs for WLAN ($2.3{\sim}2.4GHz$) applications is designed and an EBG structure is employed in the ground plane of the filter to suppress the stopband responses of the filter. The number of DBRs is chosen as two in consideration of low insertion loss and small size of two filter. The center frequency of the filter to be designed is 2.35GHz and its bandwidth is 140MHz. The responses of two kinds of DBR filters (one with EBG and the other without EBG) are calculated and compared with the measurements. The experimental results are in good agreement with the calculations: The bandwidth and insertion loss of the filter with EBG structure are 3.8% and 1.7dB respectively, while those of the filter without EBG structure are 7% and 1.23dB. It is shown that the insertion loss of the filter is increased and its bandwidth is deceased due to the EBG structure. Also the stopband responses of the filters with EBG structures are shown to be much improved compared with those without EBG.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.4
• /
• pp.43-52
• /
• 2008

Radiation characteristics of microstrip patch antennas integrated with mushroom-like EBG structures in length direction, width direction and all directions are analyzed. Patch antennas integrated with EBG structures in length direction shows the best radiation characteristics among the cases integrated in three directions. The case for the feed point of a patch antenna located in the center of both EBG structures integrated with a patch antenna shows better symmetric E-plane radiation pattern, higher forward radiation intensity, and lower backward radiation intensity compared to the case for the center of a patch antenna located in the center of both EBG structures. The variation of the radiation characteristics of patch antennas integrated with EBG structures more than 4 periods versus number of periods of EBG structures integrated is very small.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.233-234
• /
• 2008

Radiation characteristics of a microstrip patch antenna integrated with a UC-EBG (Uniplanar Compact Electromagnetic Bandgap) structure and a Mushroom EBG structure are compared. Radiation characteristics of a patch antenna integrated with a Mushroom EBG structure are better than those of a patch antenna integrated with a UC-EBG structure.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.903-910
• /
• 2016

We propose a novel multi-stack (MS) technique for a compact and wideband electromagnetic bandgap (EBG) structure in high-speed multilayer printed circuit boards. The proposed MS technique efficiently converts planar EBG arrays into a vertical structure, thus substantially miniaturizing the EBG area and reducing the distance between the noise source and the victim. A dispersion method is presented to examine the effects of the MS technique on the stopband characteristics. Enhanced features of the proposed MS-EBG structure were experimentally verified using test vehicles. It was experimentally demonstrated that the proposed MS-EBG structure efficiently suppresses the power/ground noise over a wideband frequency range with a shorter port-to-port spacing than the unit-cell length, thus overcoming a limitation of previous EBG structures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.15-27
• /
• 2008

In this paper, an EBG(Electromagnetic BandGap) resonator antenna with a stripline type FSS(Frequency Selective Surface) superstrate for PCS-band base station antennas is proposed. The characteristics of resonant frequency and -3dB bandwidth of a unit cell of a superstrate are first analyzed by varing several design parameters such as a strip width and a unit cell width in order to design an EBG resonator antenna satisfying the required antenna gain and bandwidth for PCS-band base station antennas. Among various unit cell shapes, strip dipole and stripline are considered and their characteristics are compared. It was found that a resonant length of the EBG resonator antenna becomes smaller when the stripline shape is used and the control of the bandwidth is also much easier. By using the unit cell simulation results, planar and cylindrical EBG resonator antennas at PCS-band are designed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.304-310
• /
• 2008

Generally U-slotted patch antenna with PEC(Perfect Electric Conductor) ground plane is used for mobile telecommunication. However the improvement of the bandwidth is required to enlarge the capability of mobile telecommunication, In this paper, U-slotted patch antenna with EBG(Electromagnetic Band-Gap) ground plane is proposed to enlarge thr bandwidth and its radiation characteristics are investigated. To conform the bandwidth improvement, two kinds of U-slotted patch antennas with EBG and PEC ground plane are designed, fabricated, and radiation characteristics are measured. It is shown that the proposed antenna is wider than U-slotted patch antenna with PEC ground plane in bandwidth.