• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.684-691
• /
• 2001

본 논문에서는 OFDM/M-ary PSK 시스템의 BER 성능을 반송파 주파수 오프셋을 고려하여 분석하였고, 부호화와 변조를 동시에 행할 수 있는 TCM 기법을 OFDM/M-ary PSK시스템에 적용하여 반송파 주파수 오프셋에 따른 성능 열화를 보상하였다. 성능 해석 결과, 주파수 오프셋이 커짐에 따라 OFDM/M-ary PSK 시스템의 성능이 열화 됨을 알 수 있었고, 10 dB의 Eb/No로 $BER= 10^{-3}$ 을 달성하기 위해서는 주파수 오프셋을 0.025이하로 제한해야 함을 알 수 있었다. 또한 음성 서비스 ($BER= 10^{-3}$)를 목표로 하는 경우 TCM 기법을 적용함으로써 약 4 dB의 성능 개선이 얻어짐을 알 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.

• 한국통신학회논문지
• /
• 제29권10C호
• /
• pp.1378-1386
• /
• 2004

본 논문에서는 oversampling에 의하여 BER 성능을 개선할 수 있는 OFDM 변복조 방식을 제안하였다. 제안된 OFDM 변복조 방식은 사용하는 반송파 개수 N과 동일한 개수의 0 데이터를 삽입하여 2N point IFFT하여 전송한다. 수신단에서는 두 배 높은 주파수로 샘플링하여 2N point FFT하여 신호를 복조한다. 본 논문에서는 AWGN 환경에서 제안된 방식이 기존의 방식에 비하여 SNR에서 3 dB 성능 개선이 이루어진다는 것을 수학적인 증명을 시도하였다. 또한 컴퓨터 시뮬레션을 통하여 AWGN 채널 환경에서 기존의 방식과 제안된 방식의 BER 성능을 분석하였다. 시뮬레이션 결과 동일 에러 확률 성능을 얻기 위한 Eb/No이 3 dB 개선됨을 보였다.

• Pediatric Infection and Vaccine
• /
• 제9권1호
• /
• pp.95-99
• /
• 2002

저자들은 내원 1개월 전부터의 고열 복통을 주소로 전원되어 복수를 동반한 EBV 연관성 VAHS로 진단된 1례를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.57-62
• /
• 2005

본 논문에서는 OFDM 시스템에서 임펄스 신호를 이용한 채널 추정방법을 제안한다. 채널 응답을 추정하기 위해 주파수 영역에서 새로운 프리엠블을 사용하여 시간영역에서 16샘플 간격으로 4개의 구간으로 나누고, 각 구간에서 임펄스 응답이 나오도록 한다. 이 임펄스 신호들은 한 OFDM 심볼동안에 전송한다. 수신단에서, 각 구간별 임펄스 신호를 더하여 평균을 취한다. 평균된 임펄스 응답에서 최대지연 이후 데이터는 잡음이기 때문에 zero padding을 하여 제거하고 FFT를 수행하여 채널 추정 응답을 찾아낸다. 제안된 채널 추정방법을 이용한 WLAN 시스템의 BER성능은 IEEE802.11a에서 사용하는 긴 훈련신호(long preamble)를 이용한 기존의 채널 추정 방법에 비해 약 3dB 성능 향상을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1795-1811
• /
• 2019

In order to achieve rapid and accurate detection of vehicle objects in complex traffic conditions, we propose a novel vehicle detection method. Firstly, more contextual and small-object vehicle information can be obtained by our Joint Feature Network (JFN). Secondly, our Evolved Region Proposal Network (EPRN) generates initial anchor boxes by adding an improved version of the region proposal network in this network, and at the same time filters out a large number of false vehicle boxes by soft-Non Maximum Suppression (NMS). Then, our Mask Network (MaskN) generates an example that includes the vehicle occlusion, the generator and discriminator can learn from each other in order to further improve the vehicle object detection capability. Finally, these candidate vehicle detection boxes are optimized to obtain the final vehicle detection boxes by the Fine-Tuning Network(FTN). Through the evaluation experiment on the DETRAC benchmark dataset, we find that in terms of mAP, our method exceeds Faster-RCNN by 11.15%, YOLO by 11.88%, and EB by 1.64%. Besides, our algorithm also has achieved top2 comaring with MS-CNN, YOLO-v3, RefineNet, RetinaNet, Faster-rcnn, DSSD and YOLO-v2 of vehicle category in KITTI dataset.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권1호
• /
• pp.18-22
• /
• 2022

The effect of electron beam (EB) irradiation on superconducting properties and microstructures of MgB₂ bulk superconductors were investigated. At E-beam doses of 1×10¹⁶ e/cm² and 1×10¹⁷ e/cm², the effect of irradiation on a superconducting transition temperature (T_c) of MgB₂ was weak. As a dose increases to 5×10¹⁷ e/cm², T_c decreases by 0.5 K. The critical current density (J_c) measured at 4.2 K and 20 K, and 0 T - 5 T increases slightly as exposure time increases. X-ray diffraction for the irradiation surface of MgB₂ shows that the diffraction intensity of (hkl) peaks decreases proportionally as the exposure time increases. This indicates that the crystallinity of MgB₂ was degraded by irradiation. TEM investigation for the irradiated sample showed distorted lattice structure, which is consistent with the XRD results. The J_c increase and T_c reduction of MgB₂ by irradiation are believed to be caused by the lattice distortion.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.486-492
• /
• 2022

Nitrogen oxides (NO_x; NO and NO₂) are major air pollutants and can cause harmful effects on the human body. Electron Beam Flue Gas Treatment (EBFGT) is a technology that generates electrons with an energy of 0.5-1 MeV using electron accelerators and effectively processes exhaust gases. In this study, NO_x was removed using an electron beam accelerator with spraying additives (NaOH and NH₄OH). NO and NO₂ were 100% and more than 94% removed, respectively, at an electron beam absorbed dose of 20 kGy and an additive concentration of 0.02 M (mol/L). In most cases, NO_x was removed better with lower initial NOx concentrations and higher electron beam absorbed doses. As the irradiation strength (mA) of the electron beam increases, the probability of electron impact on the material accordingly rises, which may lead to increase removal efficiency. The results of the present study show that the continuous electron beam process using additives achieved more effective removal efficiency than either individual process (wet-scrubbing or EB irradiation only).

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.30-34
• /
• 2022

Effects of electron beam (EB) irradiation on the mechanical strength of Cu (conducting sheath) and Nb (diffusion barrier) of Cu/Nb/MgB₂ superconducting was investigated. Wire- and tape-type Cu/Nb/MgB₂ samples were irradiated at E-beam energy of 2.5 MeV and 5 mA and a maximum E-beam dose was 5×10¹⁷ e/m². The hardness value of Cu and Nb region was measured by the Vickers micro-hardness method. In the case of the wire sample, the hardness of Cu and Nb increased proportionally as the dose was increased up to 5×10¹⁷ e/m², whereas in the case of the tape sample, the hardness increased up to a dose of 0.5×10¹⁷ e/m², and decreased slightly 5×10¹⁷ e/m². The hardness increase of Cu and Nb is believed to be due to the decrease of the deformability of Cu and Nb due to the defects formed inside the materials by E-beam irradiation.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.151-159
• /
• 2022

This study discusses a hypothetical method for tracking the propagation damage of Carbon Reinforced Fiber Plastic (CRFP) components underneath vibration fatigue. The High Cycle Fatigue (HCF) behavior of composite materials was generally not as severe as this of admixture alloys. Each fissure initiation in metal alloys may quickly lead to the opposite. The HCF behavior of composite materials is usually an extended state of continuous degradation between resin and fibers. The increase is that any layer-to-layer contact conditions during delamination opening will cause a dynamic complex response, which may be non-linear and dependent on temperature. Usually resulted from major deformations, it could be properly surveyed by a non-contact investigation system. Here, this article discusses the scanning laser application of that vibrometer to track the propagation damage of CRFP components underneath fatigue vibration loading. Thus, the study purpose is to demonstrate that the investigation method can implement systematically a series of hypothetical means and dynamic characteristics. The application of the relaxation method based on numerical simulation in the Artificial Intelligence (AI) Evolved Bat (EB) strategy to reduce the dynamic response is proved by numerical simulation. Thermal imaging cameras are also measurement parts of the chain and provide information in qualitative about the temperature location of the evolution and hot spots of damage.