• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.518-525
• /
• 2019

The mechanical and corrosion behavior of the Russian zirconium fuel cladding alloy E110, predominantly used in VVERs, has been investigated for many decades. The recent commercialization of a new, optimized E110 alloy, produced on a sponge zirconium basis, gave the opportunity to compare the mechanical properties of the old and the new E110 fuel claddings. Axial and tangential tensile test experiments were performed with samples from both claddings in the MTA EK. Due to the anisotropy of the cladding tubes, the axial tensile strength was 10-15% higher than the tangential (measured by ring tensile tests). The tensile strength of the new E110G alloy was 11% higher than that of the E110 cladding at room temperature. Some samples underwent chemical treatment - slight oxidation in steam or hydrogenation - or heat treatment - in argon atmosphere at temperatures between 600 and $1000^{\circ}C$. The heat treatment during the oxidation had more significant effect on the tensile strength of the claddings than the oxidation itself, which lowered the tensile strength as the thickness of the metal decreased. The hydrogenation of the cladding samples slightly lowered the tensile strength and the samples but they remained ductile even at room temperature.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.425-431
• /
• 2018

Different methods of axial and tangential testing and various sample geometries were investigated, and new test geometries were designed to determine the ultimate tensile strength of zirconium cladding tubes. The finite element method was used to model the tensile tests, and the results of the simulations were evaluated. Axial and tangential tensile tests were performed on as-received and machined fuel cladding tube samples of both E110 and E110G Russian zirconium alloys at room temperature to compare their ultimate tensile strengths and the different sample preparation methods.

• Korean Journal of Microbiology
• /
• v.46 no.2
• /
• pp.148-151
• /
• 2010

The aim of this study was to investigate the erythromycin resistance patterns of Enterococci sp. present in cow milk. A total 110 erythromycin resistant Enterococci were isolated from milk samples; E. faecalis (n=101), E. avium (n=7), and E. durans (n=2). The minimum inhibitory concentration of erythromycin against 110 Enterococci were determined. The 66.3% of Entercocci (n=73) showed high level resistance (${\geq}64$ mg/ml). Among 110 isolates, 86.3% (n=95) showed $cMLS_B$ phenotype and 13.6% (n=15) showed $iMLS_B$ The aim of this study was to investigate the erythromycin resistance patterns of Enterococci sp. present in cow milk. A total 110 erythromycin resistant Enterococci were isolated from milk samples; E. faecalis (n=101), E. avium (n=7), and E. durans (n=2). The minimum inhibitory concentration of erythromycin against 110 Enterococci were determined. The 66.3% of Entercocci (n=73) showed high level resistance (${\geq}64$ mg/ml). Among 110 isolates, 86.3% (n=95) showed $cMLS_B$ phenotype and 13.6% (n=15) showed $iMLS_B$ phenotype. All of isolates have erm(B) determinant, 75.45% (n=83) have mef(A) an efflux system determinant. The majority of Enetrcococci isolated from raw milk samples in northern area of Gyeonggi-Do showed high level of resistance to erythromycin.

• Korean Journal of Mathematics
• /
• v.8 no.2
• /
• pp.103-110
• /
• 2000

We characterize some basic properties of fuzzy topological groups and semigroups and show that under some conditions in a fuzzy topological group G, $x{\in}\bar{A}$ iff $x{\cap}AU$ for any fuzzy subset A of G and the system {U} of all fuzzy open neighborhoods of the identity e such that $U(e)=1$.

• Journal of applied mathematics & informatics
• /
• v.5 no.1
• /
• pp.99-110
• /
• 1998

In this paper we study cyclic codes in $Z_m$. i.e., ideals in $Z_mG$, G afinite abelian group and we give a classification of such codes. We also sgtudy the minimum Hamming distance and the generalized Hamming weight of BCH codes over $Z_m$.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.147-153
• /
• 2002

The purpose of this study was to evacuate the effect of different types of Poly(lactic-co-glycolic acid) (PLGA) scaffolds on the formation of human auricular and septal cartilages. All of the scaffolds were formed in a tubular shape for potential application for artificial trachea or esophagus with either 110,000 g/mol PLGA. 220,000 g/mol PLGA. or a combination of both. In order to maintain the tubular shape in vivo, two methods were used. One method was inserting polyethylene tube at the center of scaffolds made of 110,000 g/mol PLGA. The other method involved combination of the two different molecular weight PLGA's. The inner surface of tubular shaped scaffold made with 110,000 g/mol PLGA was coated with 220,000 9/mol PLGA to give more mechanical rigidity. Elastic cartilage was taken from the ear of a patient aged under 20 nears old and hyaline cartilage was taken from the nasal septum. The chondrocytes were then isolated. After second passage, the chondrocytes were seeded on the PLGA scaffolds followed by in vitro culture for one week. The cells-PLGA scaffold complex were implanted subcutaneously on the back of nude mice for 8 weeks. The tissue engineered cartilages were separated from nude mice and examined histologically after staining with the Hematoxylin Eosin. The morphology of the scaffolds were examined by scanning electron microscopy. The pores were well formed and uniformly distributed in the various PLGA scaffolds. After 8 weeks in vivo culture, cartilage was well formed with 110,000 g/mol PLGA. however lumen had collapsed. In contrast. a minimal amount of neocartilage was formed with 220,000 g/mol PLGA, while the architecture of scaffold and lumen were well preserved. Elastic cartilage formed more neocartilage than hyaline. Hyaline and elastic neocartilage were well formed on 110,000 g/mol PLGA with the polyethylene tube, exhibiting mature chondrocytes and preservation of the tubular shape. It was found that 110,000 g/mol PLGA was more appropriate for cartilage formation but higher molecular weight polymer was necessary to maintain the three dimensional shape of the scaffold.

• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.101-110
• /
• 2015

A Total Mean Cordial labeling of a graph G = (V, E) is a function $f:V(G){\rightarrow}\{0,1,2\}$ such that $f(xy)={\Large\lceil}\frac{f(x)+f(y)}{2}{\Large\rceil}$ where $x,y{\in}V(G)$, $xy{\in}E(G)$, and the total number of 0, 1 and 2 are balanced. That is ${\mid}ev_f(i)-ev_f(j){\mid}{\leq}1$, $i,j{\in}\{0,1,2\}$ where $ev_f(x)$ denotes the total number of vertices and edges labeled with x (x = 0, 1, 2). If there is a total mean cordial labeling on a graph G, then we will call G is Total Mean Cordial. Here, We investigate the Total Mean Cordial labeling behaviour of prism, gear, helms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.71-74
• /
• 2006

In this paper, we investigated the characterization of silicon oxide(SiOx) thin film on Ethylene Terephthalate(PET) substrates by e-beam deposition for transparent barrier application. The temperature of chamber increases from $30^{\circ}C$ to $110^{\circ}C$, the roughness increase while the Water vapor transmission rate (WVTR) decreases. Under these conditions, the WVTR for PET can be reduced from a level of $0.57 g/m^2/day$ (bare subtrate) to $0.05 g/m^2/day$ after application of a 200-nm-thick $SiO_2$ coating at 110 C. A more efficient way to improve permeation of PET was carried out by using a double side coating of a 5-${\mu}m$-thick parylene film. It was found that the WVTR can be reduced to a level of $-0.2 g/m^2/day$. The double side parylene coating on PET could contribute to the lower stress of oxide film, which greatly improves the WVTR data. These results indicates that the $SiO_2$ /Parylene/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.5
• /
• pp.813-819
• /
• 2019

Middle East respiratory syndrome coronavirus (MERS-CoV) induces severe respiratory impairment with a reported mortality rate of ~36% in humans. The absence of clinically available MERS-CoV vaccines and treatments to date has resulted in uncontrolled incidence and propagation of the virus. In vaccine design, fusion with the IgG Fc domain is reported to increase the immunogenicity of various vaccine antigens. However, limited reports have documented the potential negative effects of Fc fusion on vaccine antigens. To determine whether Fc fusion affects the immunogenicity of MERS-CoV antigen, we constructed a Fcassociated MERS-CoV spike protein (eS770-Fc, 110 kDa), whereby human IgG4 Fc domain was fused to MERS-CoV spike protein (eS770) via a Gly/Pro linker using baculovirus as the expression system. For comparative analyses, two eS770 proteins lacking the IgG4 Fc domain were generated using the IdeS protease ($eS770-{\Delta}Fc$) or His tag attachment (eS770-His) and the immunogenicity of the above constructs were examined following intramuscular immunization in mice. Contrary to expectations, non-Fc spike proteins ($eS770-{\Delta}Fc$, eS770-His; 90 kDa) showed higher immunogenicity than the Fc fusion protein (eS770-Fc). Moreover, unlike non-Fc spike proteins, eS770-Fc immunization did not elicit neutralizing antibodies against MERS-CoV. The lower immunogenicity of Fc-fused eS770 was related to alterations in the structural conformation of the spike protein. Taken together, our results indicate that IgG Fc fusion reduces the immunogenicity of eS770 by interfering with the proper folding structure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.110-117
• /
• 2012

A product family design has received much attention over the last several decades, since a product family-based development shortens lead-times and reduces cost, as well as increases efficiency and effectiveness of the product realization process. It is challenging work, however, to define the product family design in the heterogeneous product development environments, due to myriads of products related information described in different ways across products in any companies. In this paper, we provided a way of defining product family design framework using formal concept analysis and ontology language. Based on this, the specific product family can be derived by ontological reasoning, and the new product concept can be also expanded in the framework. The proposed framework is formalized using OWL (Web Ontology Language) and implemented in $Prot{\acute{e}}g{\acute{e}}$. Actual product family design algorithm is carried out using FaCT++ engine, a plug-in to $Prot{\acute{e}}g{\acute{e}}$, and the benefits of the proposed method are also demonstrated through a case study.