• Korean Journal of Environmental Biology
• /
• v.29 no.3
• /
• pp.162-170
• /
• 2011

In order to assess the inorganic and organic pollutents characteristics in marine water, we investigated COD (Chemical Oxygen Demand), Chlorophyll a and Escherichia coli during four seasons at 20 stations of Gwangyang Bay and at 23 stations of Jinhae Bay, Korea. The bay is divided into three zones in Gwangyang and four zones in Jinhae respectively, based on the pollutent levels. In Gwangyang Bay, the high concentration (mean 4.7 mg $L^{-1)$) of COD was recorded during spring season at Zone I, which can be characterized as a semi-enclosed eutrophic area (St. 1~9). Also, Chl. a concentrations were high at Zone I (mean 14.0 ${\mu}g\;L^{-1}$). The colony of E. coli were detected during summer season at Zone II, which is influenced by Seomjin River water. The E. coli may have been entered from the river water in a large pulse during rainy season. On the other hand, E. coli was kept low levels during four seasons at the Zone III, which is influenced indirectly by surface water currents from offshore of the bay. In Jinhae Bay, the high COD and Chl. a were shown during all seasons at Zone I, which is characteristed by semi-enclosed eutrophic area of Masan and Haengam bays. The Zone I also had been shown relatively high E. coli concentration in all seasons. In constrast, other three zones did not show seasonal characteristics of the E. coli concentrations. The present study suggests that E. coli concentrations can be significantly elevated in eutrophic semi-enclosed area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.305-305
• /
• 2010

It is known that a pulse of electrons of high kinetic energy (1-3 eV) in metals can be generated with the deposition of external energy to the surface such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not in thermal equilibrium with the metal atoms and are called "hot electrons" The concept of photon energy conversion to hot electron flow was suggested by Eric McFarland and Tang who directly measured the photocurrent on gold thin film of metal-semiconductor ($TiO_2$) Schottky diodes [1]. In order to utilize this scheme, we have fabricated metal-semiconductor Schottky diodes that are made of Pt or Au as a metallic layer, Si or $TiO_2$ as a semiconducting substrate. The Pt/$TiO_2$ and Pt/Si Schottky diodes are made by PECVD (Plasma Enhanced Chemical Vapor Deposition) for $SiO_2$, magnetron sputtering process for $TiO_2$, e-beam evaporation for metallic layers. Metal shadow mask is made for device alignment in device fabrication process. We measured photocurrent on Pt/n-Si diodes under AM1.5G. The incident photon to current conversion efficiency (IPCE) at different wavelengths was measured on the diodes. We also show that the steady-state flow of hot electrons generated from photon absorption can be directly probed with $Pt/TiO_2$ Schottky diodes [2]. We will discuss possible approaches to improve the efficiency of photon energy conversion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.162-162
• /
• 2011

Nanometer-sized noble metals can trap and guide sunlight for enhanced absorption of light based on surface plasmon that is beneficial for generation of hot electron flows. A pulse of high kinetic energy electrons (1-3 eV), or hot electrons, in metals can be generated after surface exposure to external energy, such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not at thermal equilibrium with the metal atoms. It is highly probable that the correlation between hot electron generation and surface plasmon can offer a new guide for energy conversion systems [1-3]. We show that hot electron flow is generated on the modified gold thin film (<10 nm) of metal-semiconductor (TiO2) Schottky diodes by photon absorption, which is amplified by localized surface plasmon resonance. The short-circuit photocurrent obtained with low energy photons (lower than bandgap of TiO2, ~3.1-3.2 eV) is consistent with Fowler's law, confirming the presence of hot electron flows. The morphology of the metal thin film was modified to a connected gold island structure after heating to 120, 160, 200, and 240$^{\circ}C$. These connected island structures exhibit both a significant increase in hot electron flow and a localized surface plasmon with the peak energy at 550-570 nm, which was separately characterized with UV-Vis [4]. The result indicates a strong correlation between the hot electron flow and localized surface plasmon resonance with possible application in hot electron based solar cells and photodetectors.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.70-80
• /
• 1997

In this paper, the performances of two noncoherent code tracking loops, i. e., traditional code tracking loop(TCTL) and modified code tracking loop(MCTL) are analyzed and compared in a CDMA mobile environment. Closed-form formulas for steady-state jitter variance are derived analytically for the two schemes as a function of the pulse shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth. The design issues of the loop filter are also addressed with emphasis on the second-order tracking loop. Finally, the degradation of BER performance due to timing errors is examined in a CDMA reverse link for IMT-2000 designed by ETRI.

• Journal of the Korean Magnetic Resonance Society
• /
• v.14 no.2
• /
• pp.134-143
• /
• 2010

We studied the hydrogen-bonded $TlH_2PO_4$ (TDP) ferroelectrics treated with the proton-beam bombardment. The TDP material was irradiated with 1-MeV proton beam at a dose of $10^{15}/cm^2$. In order to analyze the hydrogen environment in TDP, we carried out the $^1H$ high resolution nuclear magnetic resonance (NMR) - i.e., Combined Rotation And Multiple Pulse Spectroscopy (CRAMPS) measurement. The isotropic chemical shift of hydrogen indicates its displacive property is related to the $PO_4$ lattice deformation which occurs throughout the antiferroelectric-, the ferroelastic- and the paraelastic-phase transitions. The temperature dependence of $\sigma_{iso}$ reveals the electronic charge redistribution is induced by the proton-beam irradiation and the elastic property.

• Journal of Chest Surgery
• /
• v.11 no.1
• /
• pp.81-84
• /
• 1978

A 15 years Old girl was admitted with chief complaints of intermittent claudication of lower extremity, dizziness, and headache for 5 years. On admission, malignant hypertension was noted in the upper part of body [190-150/120-110] but femoral & dorsalis pedis pulse could not palpate. Once she had experienced C. V. A. due to hypertension of upper part, about years ago. On auscultation, systolic murmur was audible along the left sternal border. E.C.G. Showed left ventricular hypertrophy pattern, and others within normal limit. Retrograde aortography demonstrated diffuse narrowing of entire thoracic aorta with underdeveloped lower abdominal aorta [below the renal artery] & both common lilac artery, and rich collaterals, but normally visualized greater arteries in the aortic arch. On left posterolasteral thoracotomy, entire descending thoracic aorta revealed marked narrowing with mild perivascular adhesion, but no mediastinal pleura adhesion. These findings suggest as congenital type of atypical coarctation in the entire thoracic aorta with mild secondary change. But histopathology was showed the findings of chronic non-specific aortitis, later. Dacron by pass graft was performed with end to side anastomosis between graft and aortic wall. After operation, all her preoperative symptoms & signs were disappeared, and discharged with good general condition.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.482-489
• /
• 1999

AC PDP(P1asma Display Pane1)s use the mixture of inert gases to generate a discharge inside the display pixels. Impurities such as CO, $CO_2$ and OH inside discharge region may deteriorate the characteristics of PDP operation during long life time of PDP. Electro-negative gas such as CO can cause the sustain pulse amplitude to rise by attaching electrons which will play an important role in the earlier stage of the discharge. MgO film is used to protect the dielectric layer in AC PDP, and is in contact with the free space of display pixel where it is filled with the inert gas mixture. So, MgO film can be a main source of impurities. In this experiment, we observed the change of impurity generation of various MgO films which were deposited by different methods, by using QMS. (quadropole mass spectrometer) The main impurites were $H_2$, CO and $CO_2$. And with the comparison of the TPD (temperature programmed desorption) result, it can be understood that impurity gases are generated by sputtering of MgO surface not by outgassing. Deposition method had effects on the characteristics of the impurity generation. The MgO film manufactured by e-beam evaporation generated more amount of impurity gases than the MgO films manufactured by sputtering or ion-plating. And also heat treatment of MgO film after deposition decreased the magnitude of impurity gas generation.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.90-94
• /
• 2012

A simple and sensitive electrochemical sensor for simultaneous and quantitative detection of ranitidine (RT) and metronidazole (MT) was developed, based on a poly(thionine)-modified anodized glassy carbon electrode (PTH/GCE). The modified electrode showed the excellent electrocatalytic activity towards the reduction of both RT and MT in 0.1M phosphate buffer solution (PBS, pH 7.0). The peak-to-peak separations (${\Delta}E_p$) for the simultaneous detection of RT and MT between the two reduction waves in CV and DPV were increased significantly from ca. 100 mV at anodized GCE, to ca. 550 mV at the PTH/GCE. The reduction peak currents of RT and MT were linear over the range from 35 to $500{\mu}M$ in the presence of 200 and $150{\mu}M$ of RT and MT, respectively. The sensor showed the sensitivity of 0.58 and $0.78{\mu}A/cm^2/{\mu}M$ with the detection limits (S/N = 3) of 1.5 and $0.96{\mu}M$, respectively for RT and MT.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.63-68
• /
• 1994

The Curie point annealing effects on electrophysical phenomena at the magnetized strontium ferrite(SrO$\cdot$ 6$Fe_{2}O_{3}$) ceramics electrode/10$^{-3}$M KC1 aqueous electrolyte interfaces have been studied using cyclic voltammetric, normal pulse voltammetric, chronocoulometric, and electrochemical impedance techiques. After the Curie point annealing the magnetic flux densities of the speciment was decreased from 900-1100 gauss to 1-2 gauss, i.e. demagnetized. The real component of interfacial impedance was decreased from 7280-7320 ohm to 790-830 ohm. The adsorption and the charge on the electrical double layer was increased from 0 $\mu$C to -58 $\mu$C. The Curie point annealing and the related electrical double layer effect can influence not only the electrophysical properties of the strontium ferrite ceramics electrode itself but also the electrochemical phenomena at the electrode interface. This experimental results suggest that the Curie point annealing and the related electrical double layer effect can be applied to electrochemical magnetic sensors.

• Rapid Communication in Photoscience
• /
• v.4 no.1
• /
• pp.25-28
• /
• 2015

The time-resolved photoexcitation dynamics of electrical conductivity of the magnetic organic superconductor ${\lambda}-(BETS)_2Fe_{0.45}Ga_{0.55}Cl_4$ has been studied with a nanosecond visible laser pulse at its three different phases, i. e., metallic phase, superconducting phase and insulating phase. A transient increase of the resistance is induced by photoirradiation at all the temperatures measured for all three phases, but the decay profile shows a significant temperature dependence. The relaxation rate in the metallic and insulating phase are different from each other, and the decay time is relatively faster and almost constant in the metallic phase. However, a prolongation of the relaxation time is observed at temperature just around the narrow superconducting phase. Nonbolometric (nonthermal) origin of the observed photoresponse of the electrical conductivity is confirmed in the superconducting phase.