• Journal of Power System Engineering
• /
• v.16 no.5
• /
• pp.32-39
• /
• 2012

The study experimented to understand ice-on-coil type ice making characteristics on to 3 kinds of circular tube, oval tube and small diameter tube using ice maker. The experiment were carried out under various conditions, that used brine temperature($-10^{\circ}C$, $-6^{\circ}C$), brine flow rate(1.0m/s, 1.8m/s) and inlet water temperature ($6^{\circ}C$, $12^{\circ}C$) etc. Mass of ice per ice making area increased according to the decrease of the brine temperature and inlet water temperature, but that was increased according to the increase of the brine flow rate. Oval ice making tube produced ice 1.11 to 2.46 times that of 9mm circular ice making tube, and 3mm small diameter ice making tube produced ice 1.06 to 1.51 times that of 9mm circular ice making tube.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.142-143
• /
• 2007

A 1MW class HTS(High-Temperature Superconducting) synchronous motor has been developed. This motor is aimed to be utilized for industrial application such as large motors operating in large plants. The HTS field coil of the developed motor is cooled by way of Neon thermosiphon mechanism and the stator coil is cooled by water through hollow copper conductor. This paper describes performance test results of our motor, which was conducted at steady state in generator mode and motor mode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.233-233
• /
• 2010

Magnetic random access memory (MRAM), based on magnetic tunnel junction (MTJ) and CMOS, is a prominent candidate among prospective semiconductor memories because it can provide nonvolatility, fast access time, unlimited read/write endurance, low operating voltage and high storage density. The etching of MTJ stack with good properties is one of a key process for the realization of high density MRAM. In order to achieve high quality MTJ stack, the use of CoFeB and IrMn magnetic films as free layers was proposed. In this study, inductively coupled plasma reactive ion etching of CoFeB and IrMn thin films masked with Ti hard mask was investigated in a $Cl_2$/Ar gas mix. The etch rate of CoFeB and IrMn films were examined on varying $Cl_2$ gas concentration. As the $Cl_2$ gas increased, the etch rate monotonously decreased. The effective of etch parameters including coil rf power, dc-bais voltage, and gas pressure on the etch profile of CoFeB and IrMn thin film was explored, At high coil rf power, high dc-bais voltage, low gas pressure, the etching of CoFeB and IrMn displayed better etch profiles. Finally, the clean and vertical etch sidewall of CoFeB and IrMn free layers can be achieved by means of thin Ti hard mask in a $Cl_2$/Ar plasma at the optimized condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.213-213
• /
• 2010

Magnetic random access memory (MRAM), based on magnetic tunnel junction (MTJ) and CMOS, is one of the best semiconductor memories because it can provide nonvolatility, fast access time, unlimited read/write endurance, low operating voltage and high storage density. For the realization of high density MRAM, the etching of MTJ stack with good properties is one of a key process. Recently, there has been great interest in the MTJ stack using MgO as barrier layer for its huge room temperature MR ratio. The use of MgO barrier layer will undoubtedly accelerate the development of MTJ stack for MRAM. In this study, high-density plasma reactive ion etching of MgO films was investigated in an inductively coupled plasma of $Cl_2$/Ar gas mixes. The etch rate, etch selectivity and etch profile of this magnetic film were examined on vary gas concentration. As the $Cl_2$ gas concentration increased, the etch rate of MgO monotonously decreased and etch slop was slanted. The effective of etch parameters including coil rf power, dc-bais voltage, and gas pressure on the etch profile of MgO thin film was explored, At high coil rf power, high dc-bais voltage, low gas pressure, the etching of MgO displayed better etch profiles. Finally, the clean and vertical etch sidewall of MgO films was achieved using $Cl_2$/Ar plasma at the optimized etch conditions.

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.268-278
• /
• 2013

Objectives: The purpose of this study was to apply the Hazard Analysis Critical Control Point (HACCP) system to the production of seasoned laver products. The hazard analysis examined microbial evaluations and developed a HACCP management plan through the heating process. Methods: In this study we chose three companies and performed the analysis thrice. During this study, general bacteria along with other food poisoning bacteria such as Salmonella spp., Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, E.coil, O157:H7, Vibrio parahaemolyticus, were studied at varying temperatures from 100 to $300^{\circ}C$. Results: The presence of general bacteria was detected in raw laver in the samples analyzed from all the three companies, and the number ranged from $10^5-10^7$. Bacillus cereus was detected in samples from only two of the three companies analyzed. However, Salmonella spp., Staphylococcus aureus, Listeria monocytogenes, E.coil, O157:H7, and Vibrio parahaemolyticus were all negative. General bacteria was reduced to $10^5$ after being subjected to temperatures of $100-250^{\circ}C$, but heating to over $270^{\circ}C$ reduced the number to below $10^3$, and the other microbes such as Bacillus cereus were not detected. Conclusions: In conclusion, the heating process ($270-280^{\circ}C$) along with RPM of 100-1200 were identified as CCP to reduce biological hazards.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.212-217
• /
• 2000

This study was determined protein reaction, antioxidative activity, nitrite scavening ability and antimicrobial activity of tannins isolated from astringent persimmon fruits. Tannins extracted from green persimmon fruits reacted highly with BSA(bovine serum albumin). Reactions between tannins and BSA were more active when contents of tannin were higher than that of BSA. Antioxidative abilities of green persimmon tannin were comparable to that of BHT(butylated hydroxytoluene). Green persimmon tannins exhibited remarkable nitrite-scavenging activity. Different antimicrobial activities of persimmon tannins were observed depending on the maturity. The growth of V. parahaemolyticus and E coil were highly inhibited by the addition of persimmon tannins. Tannins from soft persimmon did not have antimicrobial activities against B. subtilis and S. typhimurium.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.151-155
• /
• 2005

Though the nuclear fusion system has been fused into hydro-nuclear based on thermodynamics by tokamak system, there has been no success story. Because it's impossible to confine high temperatured plasma long Time actually. New nuclear-fusion-system using this nuclear-fusion-method will gather toroidal-magnetic-field by putting Core Block(C shaped torus iron) and toroidal-aluminium coil into toroidal magnetic-field-aluminium. That will arrange the nuclear-fusion-route on a gap fallen out by a part of cut torus-core and mkee the toroidal-an electric-current flow and electrolyze the fusioned-material (an electrolyte) into troidal-electrocity. That consists of troidal-magnetic-fild coil, toroidal-coial fusioned- material, series circuit. So toroidal-electocity will be changed into filament-electrocity and be introjected into fusioned-material. In a sapce on filament-electrocity, the magnetic inhaling-powr will enlarge to input-electrocity outside. This will exceed the Coulomb force and reache the nuclear-fusion. By this phenomenon there be quantity-loss. By this process I could confirmed that Einstein euation$(E=mC^2)$ releases into thermal energy.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.349-354
• /
• 1985

A 4.7 kb Hind III fragment containing $\alpha$-amylase gene of Bacillus stearothermophilus IAM 11062 was cloned in Escherichia coil HB101, using plasmid pBR322 and runaway plasmid pSY343 as a vector. The cloned gene was stably maintained and expressed In E.coli. The constructed strain of E. coli have at least 3 times higher amylase activity than the donor strain, of B. stearothermophilus. About 75％ of the $\alpha$-amylase produced by the constructed strain of E. coli was localized in the periplasm and it was found that the enzymes can be released by an osmotic shock using EDTA. The enzymatic properties of L-amylase produced in E. coli were very similar to those produced by B. stearothermophilus in terms of optimum temperature, heat stability and molecular weight.

• Korean Journal of Microbiology
• /
• v.50 no.2
• /
• pp.114-118
• /
• 2014

A total of 122 ESBL-producing intestinal bacteria were collected from regional hospitals in the Chungcheong area. Combination disk test (CDT) was performed for antimaicrobial susceptability using cefotaxime and cefotaxime/clavulanate according to Clinical Laboratory Standard Institute (CLSI). Mutiplex PCR using specific primers was performed for a detection of ESBL-genotypes and enterobacterial repetitive intergenic consensus (ERIC)-PCR was carried out for the tracking of molecular epidemiology. In the confirmation test using CDT, 73 out of 76 (96.1%) ESBL-producing Escherichia coli and 43 out of 46 (93.4%) ESBL-producing Klebsiella pnemoniae were positive. In the multiplex PCR, 60.5% of E. coil were positive for CTX-M-2 type gene and 56.5% of K. pneumoniae were positive for VEB -1 type gene. In the ERIC-PCR, E. coil isolates formed 5 clusters and K. pneumoniae isolates were grouped into 4 clusters depending on region. Genotypes of clinical isolates are useful for detection and differentiation of ESBL producing intestinal bacteria. The ERIC-PCR method is thought to be helpful for establishing a regional surveillance system for infection due to its formation of different clusters depending on region.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2374-2376
• /
• 2004

In this paper, we describe a DSP-based test apparatus for Control Element Drive Mechanism (CEDM). Using this apparatus, we can catch the mechanical and electrical characteristics of CEDM and obtain the information about the improvement of CEDM and the design of CEDM power controller. The test apparatus for CEDM introduced in this paper can input firing angles directly into gate drive circuits of thyristors so that this method can be used to derive the maximum and minimum values of firing angles within available limits for a 3-phase half-wave rectifier. Angle inputs help us understand each coil's response characteristics. Since this apparatus generates a serial sequence for CEDM insertion and withdrawal operations, we may judge whether CEDM works correctly as expected or not in each phase of a step movement.