• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.613-617
• /
• 1992

The tracking control problem of a flexible manipulator with a prismatic joint along a given path is discussed. The nondimensionalization of the elastic part of the manipulator makes it possible to model such a flexible manipulator. For a discontinuous velocity trajectory, an optimal control theory has been applied to formulate the problem. The optimal scheme is given to find the input commands(e.g., joint torques) necessary to produce a, specified end effector motion. Simulated results show the potential use of this scheme for a discontinuous velocity trajectory control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.626-630
• /
• 2005

This paper presents a novel Intelligent-Welding-Carriage (IWC) for automation of curved block in shipbuilding. The curved block is usually used in both front and back side of the ship. In curved block root gap is big, $1{\sim}7$ [mm] and inclination, $0{\sim}30$ [deg]. Since available conventional carriage type is limited to use below root gap of 3 [mm], only manual welding is employed in curved block. To adopt an IWC in curved block, it requires control of the welding conditions, i.e., voltage, current and travel speed, with respect to root gap and inclination to achieve good welding quality. In this paper, an IWC is developed for automization of welding operation to accommodate gap and inclination. Kinematics model and dynamics using Lagrangian formulation of the manipulator is introduced. IWC utilizes a database to perform accurate welding. The database is programmed based on numerous experimental test results with respect to gap, inclination, material, travel speed, weaving condition, voltage, and current. Finally, experimental result using PID control is addressed for verify the trajectory tracking accuracy of end-effector.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.171-176
• /
• 2005

This paper presents a novel Intelligent-Welding-Carriage (IWC) for automation of curved block in shipbuilding. The curved block is usually used in both front and back side of the ship. In curved block root gap is big, 1-7 (mm) and inclination, 0-30 (deg). Since available conventional carriage type is limited to use below root gap of 3 (mm), only manual welding is employed in curved block. To adopt an IWC in curved block, it requires control of the welding conditions, i.e., voltage. current, weaving speed, dwell time and travel speed, with respect to root gap and inclination to achieve good welding qualify. In this paper, an IWC is developed for automization of welding operation to accommodate gap and inclination. Kinematics model and dynamics using Lagrangian formulation of the manipulator is introduced. IWC utilizes a database to perform accurate welding. The database is programmed based on numerous experimental test results with respect to gap, inclination, material, travel speed, weaving condition, voltage, and current. Finally, experimental result using PID control is addressed for verifying the trajectory tracking accuracy of end-effector.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.318-323
• /
• 2013

For fast and accurate motion of 6-axis articulated robot, more noble motion control strategy is needed. In general, the movement strategy of industrial robots can be divided into two kinds, PTP (Point to Point) and CP (Continuous Path). Recently, industrial robots which should be co-worked with machine tools are increasingly needed for performing various jobs, as well as simple handling or welding. Therefore, in order to cope with high-speed handling of the cooperation of industrial robots with machine tools or other devices, CP should be implemented so as to reduce vibration and noise, as well as decreasing operation time. This paper will realize CP motion (especially joint-linear) blending in 3-dimensional space for a 6-axis articulated (lab-manufactured) robot (called as "RS2") by using LabVIEW$^{(R)}$ (6) programming, based on a parametric interpolation. Another small contribution of this paper is the proposal of motion blending simulation technique based on Recurdyn$^{(R)}$ V7 and Solidworks$^{(R)}$, in order to figure out whether the joint-linear blending motion can generate the stable motion of robot in the sense of velocity magnitude at the end-effector of robot or not. In order to evaluate the performance of joint-linear motion blending, simple PTP (i.e., linear-linear) is also physically implemented on RS2. The implementation results of joint-linear motion blending and PTP are compared in terms of vibration magnitude and travel time by using the vibration testing equipment of Medallion of Zonic$^{(R)}$. It can be confirmed verified that the vibration peak of joint-linear motion blending has been reduced to 1/10, compared to that of PTP.

• 한국산림과학회지
• /
• 제111권2호
• /
• pp.287-301
• /
• 2022

본 연구는 기계화 목재 생산 작업에 가장 많이 활용되는 크레인 작업의 효율성을 높이기 위하여 엔드이펙터를 직관적으로 수직 또는 수평 제어할 수 있는 크레인 팁 제어방법을 제안하고 제어성능을 확인하기 위해 수행되었다. 실험 변수에 따른 제어성능을 검증하고자 전동실린더를 이용하여 실험실 규모의 크레인을 제작하고, 크레인에 대한 순기구학/역기구학 분석을 통하여 현재 크레인 팁의 위치좌표와 각 목표점에서의 조인트 각도를 출력할 수 있도록 구성하였다. 경로점을 생성하여 제어하는 방법을 이용하였고, LBO(Lateral Boundary Offset)을 이용한 불감대 영역을 설정하도록 하였다. 뱅뱅제어(Bang-bang control)을 이용하여 적정 파라미터를 선정하였고, 경로점의 개수와 LBO 반경은 평균오차와 관계가 있었으며, 실린더의 속도는 소요시간과 관계가 있는 것으로 확인되었다. 경로점의 개수가 증가, LBO 반경이 감소함에 따라 평균오차는 감소하였고, 실린더의 속도가 감소함에 따라 소요시간은 감소하였다. 비례제어를 이용하여 실린더의 속도가 매 제어주기마다 변경될 때에는 소요시간은 큰 폭으로 감소하였지만 실제 제어의 형상은 큰 범위에서 오버슈트와 언더슈트를 반복하며 제어가 이루어졌다. 따라서, 추가적으로 각각의 실린더의 속도를 상대적으로 변경할 수 있는 속도 게인을 적용하여 비례제어를 수행하였고, 10 mm 이내의 범위에서 제어가 이루어짐에 따라 20 ms의 제어주기에서 속도 게인이 적용된 비례제어만을 이용하여 크레인 팁 제어가 가능한 것으로 검증되었다.