• Carbon letters
• /
• v.18
• /
• pp.56-61
• /
• 2016

Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N₂ gas at 800℃ for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and cross-linked cellulose as a result of the E-beam stabilization. The hemicellulose decreased the initial decomposition temperature, and the cross-linked bonds increased the carbonization yield of the cellulose fibers. Increasing the absorbed E-beam dose to 1500 kGy increased the carbonization yield of the cellulose-based carbon fiber by 27.5% upon exposure compared to untreated cellulose fibers.

• Rapid Communication in Photoscience
• /
• v.4 no.4
• /
• pp.86-87
• /
• 2015

Substituted butadiyne cobalt complexes 1, 2 were prepared and placed on the e-beam to study the fragmentation focused on diyne generation, in MS spectrometer. Phenyl or methyl substituted cobalt complexes generated the corresponding diyne with 100, 30% relative intensities under e-beam irradiation in gas phase.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1397-1400
• /
• 2013

The influence of electron beam irradiation on photocatalytic activity of $TiO_2$ thin films was investigated. $TiO_2$ thin films were prepared by anodization of Ti foil, and they were then subjected to an 1 MeV electron beam. Changes in physical properties and photocatalytic activity of $TiO_2$ before and after e-beam irradiation were investigated. The crystallinity of the synthesized materials was investigated by X-ray diffraction, and the oxidation states of both titanium and oxygen were determined by X-ray photoelectron spectroscopy (XPS). The density of donor ($N_d$) and flat band potential ($E_{fb}$) were investigated by Mott-Schottky analysis, and photocurrent was measured under a 1kW Xenon lamp illumination. After e-beam irradiation, significant change of Ti oxidation state was observed. $Ti^{3+}/Ti^{4+}$ ratio increased mainly due to the surface reduction by electron, and photocurrent was observed to increase with e-beam irradiation.

• Carbon letters
• /
• v.15 no.4
• /
• pp.262-267
• /
• 2014

Pyrolized fuel oil (PFO) was reformed by novel electron beam (E-beam) radiation, and the elemental composition, chemical bonds, average molecular weight, solubility, softening point, yields, and density of the modified patches were characterized. These properties of modified pitch were dependent on the reforming method (heat or E-beam radiation treatment) and absorbed dose. Aromaticity ($F_a$), average molecular weight, solubility, softening point, and density increased in proportion to the absorbed dose of E-beam radiation, with the exception of the highest absorbed dose, due to modification by free radical polymerization and the powerful energy intensity of E-beam treatment. The H/C ratio and yield exhibited the opposite trend for the same reason. These results indicate that novel E-beam radiation reforming is suitable for the preparation of aromatic pitch with a high ${\beta}$-resin content.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.743-747
• /
• 2007

There has been steady effect for the development of the electron-beam lithography technologies for the circuit patterning of the future semiconductor devices. In this study, we have performed a Monte-Carlo simulation whore $1{\times}10^4$ electrons with various kinetic energies (100eV, 300eV, 500eV, 700eV, and 1000eV) were shot into polymethyl methacrylate(PMMA) resist of 100-nm thickness. The penetration depth of each electron beam in the resist layer were analyzed using Gaussian analysis method.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• Carbon letters
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.119-120
• /
• 2012

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.575-575
• /
• 2013

Indium Zinc Oxide (IZO)는 가시광 영역(380~780 nm)에서 높은 투과율과 적외선영역에서 높은 반사율을 보이는 투명산화막으로서 Flexible display 적용으로 주목 받는 재료이다. 특히 비 화학적 양론비(non-stoichiometric)로 성장된 박막은 N형 반도체 특성을 갖기 때문에 광전자 소자, 액정표시소자와 태양전지의 투명전극 재료로 이용되고 있으며, 향 후에도 수요는 계속 증가될 전망이다. 일반적으로 IZO 박막은 높은 열처리 온도에 의한 기판재료의 선택이 한정적인 단점이 있다. 따라서 최근에는 정밀하게 제어된 에너지를 가진 전자를 표면에 조사(E-beam irradiation)하여 박막의 물성을 개선하고 기판재료의 선택성을 넓히는 연구가 활발히 진행되고 있다 [1]. 본 연구에서는 RF Magnetron Sputtering 법을 이용하여 Glass 위에 IZO를 증착하였다. 스퍼터링타겟은 고순도 IZO 타겟을 이용하여 100 nm의 두께를 가지는 박막을 증착하였다. 증착된 IZO 박막에 E-beam Source ((주)인포비온)를 이용하여 E-beam irradiation energy 조건에 변화를 주어 박막의 물성 변화를 관찰하였다. IZO 박막의 두께를 측정하기 위해 SEM (Cross section)을 이용하였다. E-beam irradiation energy에 따른 가시광 영역(380~780 nm)에서의 광투 과도는 UV-Vis spectrometer를 사용하여 측정하였고, 전기적인 특성은 Hall measurement system 을 이용하여 측정하였다. 또한 박막의 결정성과 거칠기의 변화는 XRD (X-ray Diffraction)와 원자 간력현미경(Atomic Force Microscope; AFM)을 이용하여 측정하였다. Rf magnetron Sputtering 법을 이용하여 증착한 IZO 박막에 Post E-beam irradiation이 전기전도 및 광 투과특성과 결정성과 표면 조도를 향상시키는데 크게 기여함을 확인할 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.649-650
• /
• 2012