• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.3
• /
• pp.261-269
• /
• 2014

This study focused on the performance of the newly developed hybrid filter system to capture fine particulate matter and mercury compounds in a coal-fired power plant. The hybrid filter system combining bag-filter and electrostatic precipitator had been developed to remove fine particulate matter. However, it would have a good performance to control mercury compounds as well. In Hybrid filter capture system, the total removal efficiency of total mercury compounds consisting of particulate mercury ($Hg_p$), oxidized mercury ($Hg^{2+}$), and elemental mercury ($Hg^0$) was 66.2%. The speciation of mercury compounds at inlet and outlet of Hybrid filter capture system were 1.3% and 0% of $Hg_p$, 85.2% and 68.1% of $Hg^0$, and 13.5% and 31.9% of $Hg^{2+}$, respectively. In hybrid filter capture system injected with 100% of flue-gas, the removal efficiency of total mercury was calculated to increase to 93.5%.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.405-406
• /
• 2016

A bidirectional secondary LLC resonant converter with auxiliary switches and an additional inductor is proposed to achieve the high gain characteristics of LLC resonant convertors. Auxiliary switches, an additional inductor and a resonant capacitor are connected in the high voltage secondary side of the proposed converter. The ac analysis and operating characteristics of bidirectional secondary LLC resonant converter are investigated. A 1kW prototype bidirectional secondary LLC resonant converter connected to the $400V_{DC}$ buses is designed and tested to confirm the validity and applicability of the proposed converter.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.251-253
• /
• 2008

This research combines LED display System with a module of solar cell which transforms solar energy to electrical energy. In order to simplify the installation and the movement of LED Display System, the system removed the conventional power distribution is developed, and that improves the advertising effect of LED Display System.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.219-221
• /
• 1996

A reluctance motor is a electric machine in which torque is produced by the tendency of its movable part to move to a position where the inductance of the excited winding is maximized. This means physical fact that the energy stored in the field tend to be minimized as the energy stored in the field is converted the mechanical work. In this paper, we have studied the characteristics of the electromagnetic energy conversion about SRM which have 6 stator and 4 rotor poles with 3 phase. In addition we design the fundamental model of SRM with requirements(e.g. power, speed) and simulate with PC-SRD.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.132-135
• /
• 2001

The design of square pulse generators using pulse forming lines (PFLs) made up of identical L and C, was reviewed in this study. 14 different types of PFLs were analyzed utilizing PSpice simulation results. These PFLs were characterized with respect to their distinct features: the number of forming lines (single or double), the circuit relationship between PFL and load (parallel or series), the types of energy storage (voltage source, current source or a combination of both). The characteristic impedances, output parameters such as pulse width, voltage and current magnitudes, and powers were derived for each scheme. The merits and demerits of the output parameters were also included.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.418-422
• /
• 2001

To achieve a high performance in direct vector control of induction motor, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using Parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function by simulation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.363-366
• /
• 2003

In recent years, the Photovoltaic(PV) industries have been increasing steadily by an average of 30$\%$ per you. However, it is necessary to reduce PV module cost and to improve conversion efficiency to be promoted distribution of PV Japan, USA and Europe have been researching cost and efficiency of that. In this paper, we try to review diffusion perspective of PV in these countries. From the results of this paper, we will intend to suggest a suitable future course for domestic PV distribution.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.359-362
• /
• 2003

In recent years, the Photovoltaic(PV) industries have been Increasing steadily by an average of 30$\%$ per year. However, it is necessary to reduce PV module cost and to improve conversion efficiency to be promoted distribution of PV Japan, USA and Europe have been researching cost and efficiency of that. In this paper, we try to review diffusion status and policy of PV in these countries. From the results, we will intend to suggest a suitable future course for domestic PV distribution.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.516-520
• /
• 1991

This paper presents a comparative analysis of two inverter power supply topologies for induction heating and melting applications. The comparison is based on criteria such as resonant condition, component ratings, minimum and maximum operating frequencies, operation under varying load conditions, inverter starting current, and diode reverse recovery time. The voltage source series/parallel resonant inverters are found to offer the best overall performance with respect to converter utilization.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.360-362
• /
• 1994

This paper presents a design and implementation of DSP-based full-digitalized sliding mode controller(SMC) for an induction motor(IM) fed by voltage source inverter(VSI) with intelligent power module(IPM). By using SMC with load torque observer, we can obtain improved control performances, i.e., robustness, high precision and low chattering. Furthermore, this paper emploies space vector modulation (SVM) method which is implemented to minimize hard ware configuration and to obtain modulation flexibility along with only DSP software operation.