• Corrosion Science and Technology
• /
• 제13권2호
• /
• pp.62-69
• /
• 2014

A huge number of carbon steel piping components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the piping components. To manage the wall thinning degradation, most of utilities in the world predict the wall thinning rate based on the computational program such as CHECWORKS, COMSY, and BRT-CICERO, evaluate the UT (Ultrasonic Test) data, and determine next inspection timing, repair or replacement, if needed. There are several evaluation methods, such as band, blanket, and strip methods, commonly used for determining the wear of piping components from single UT inspection data. It has been identified that those single UT evaluation methods not only do not consider the manufacturing features of pipes, but also may exclude the data of the most thinned point when determining the representative wear rate of piping components. This paper describes a newly developed single UT evaluation method, E-Cross method, for solving above problems and introduces application examples for several pipes and elbows. It was identified that the E-Cross method using the length and width of UT data excluded the most thinned points appropriate as the single UT evaluation method for thinned piping components.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.283-293
• /
• 2019

Evaluating the stability of the excavation face of the cross-river shield tunnel with good accuracy is considered as a nonlinear and multivariable complex issue. Understanding the stability evaluation method of the shield tunnel excavation face is vital to operate and control the shield machine during shield tunneling. Considering the instability mechanism of the excavation face of the cross-river shield and the characteristics of this engineering, seven evaluation indexes of the stability of the excavation face were selected, i.e., the over-span ratio, buried depth of the tunnel, groundwater condition, soil permeability, internal friction angle, soil cohesion and advancing speed. The weight of each evaluation index was obtained by using the analytic hierarchy process and the entropy weight method. The evaluation model of the cross-river shield construction excavation face stability is established based on the idea point method. The feasibility of the evaluation model was verified by the engineering application in a cross-river shield tunnel project in China. Results obtained via the evaluation model are in good agreement with the actual construction situation. The proposed evaluation method is demonstrated as a promising and innovative method for the stability evaluation and safety construction of the cross-river shield tunnel engineerings.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.14-22
• /
• 2001

The frequency responses on the sub-pixel evaluation technique were investigated using the Monte-calro Simulation technique. The frequency response by the FFT based cross-correlation gives very good results, however, the gain loss does exist for the small displacement, (less than 0.5 pixel). While, the no gain loss is observed in the Direct Cross-correlation, however, the sub-pixel accuracy was limited to be about 0.1 pixel, i.e., it could not detect the small displacement. To detect the higher accurate sub-pixel displacement, the gradient based technique is the best. For the small interrogation area (e.g., 4x4), only the gradient technique can detect the small displacement correctly.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.109-125
• /
• 2000

The purpose of this study was to provide basic data for a more functional torso's pattern by analyzing multidimensional anthropometric measurements and the wearing condition. For the functional torso's pattern drafting, the fitness state of basic torso's patterns(4 types) was compared and evaluated from the cross-sectioned overlap maps by $moir{\acute{e}}$ topography. The results were as follows: 1. According to the measurements of four patterns by using the one-dimensional measurement, the amount of ease in girth item for pattern A was the smallest. The ease of clothes was affected by the position of dart, the amount of dart, and the drafting method. 2. As the results of wearing evaluation by $moir{\acute{e}}$ topography method, pattern B had the largest space length for hip part, pattern A, C and D had the largest space length for bust part. Also, in the all measurement items, pattern A had the smallest amount of ease. The space length for bust and waist part of pattern B was smaller than pattern D, but, for abdomen and hip part of pattern B was larger than pattern D. The space length of pattern C was revealed intermediate for all measurement part. 3. The significant difference of space length of each pattern was shown in all parts except bust part(p<.05). The amount of space was affected by the amount of dart, the characteristics of the somatotype, and the drafting method.

• Toxicological Research
• /
• 제17권
• /
• pp.197-199
• /
• 2001

Enhancement of antigen-specific IgE is a hallmark of allergic hyperresponsiveness, therefore it is necessary to adopt or develop a highly sensitive and specific assay for determination of allergen-specific IgE levels in vivo. In this presentation, we introduce an ELISA (enzyme linked immunosorbent assay) system developed to measure the levels of chicken egg ovalbumin (OVA)-specific IgE in serum. The ELISA method uses a commercially available purified rat anti-mouse IgE as a capture Ab and biotinylated OVA as a detection reagent. Avidin-peroxidase with its substrate is used for color development resulting in optical density measurement at 405 nm. The ELISA system produces a highly sensitive dose-response relation-ship between optical density levels and the dilution titer of the OVA-IgE standard serum but no cross-reaction with unrelated IgE or IgG. It is believed that the system is an Efficient tool to delineate an adjuvant effect of environmental pollutants on development of asthmatic and atopic responses.

• 유변학
• /
• 제10권4호
• /
• pp.227-233
• /
• 1998

잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate(BPH)를 Cycloaliphatic계 에폭시 (CAE)/DGEBA계 에폭시의 혼합물에 1 mol% 첨가 시킨 후 혼합 조성비에 따른 유변학적 특성과 경화 동력학에 대해 연구하였다. 잠재특성은 등온 DSC를 이용하여 각각 $150^{\circ}C$와 $50^{\circ}C$의 반응 온도에 대한시간의 함수로서 전화량을 구하여 측정하였다. 블렌드 시스템의 유변학적 특성은 레오미터를 사용한 등온 실험을 통하여 storage modulus (G'), loss modulus (G") 그리고 damping factor (tan$\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 겔화 시간과 경화 온도를 Arrenius equation에 적용시킨 결과 가교 활성화 에너지 ($E_c$)를 구할 수 있었으며 겔화 시간과 활성화 에너지 모두 DGEBA의 함량이 증가할수록 증가하였다. 경화 활성화 에너지 ($E_a$)를 동적 DSC를 이용하여 Kissinger method에 의해 구하였는데 활성화 에너지는 CAE의 함량이 증가할수록 감소함으로써 높은 반응성을 나타내었는데, 이는 짧은 반복 단위와 단순한 곁사슬기 그리고 반응 매질 내의 점도 등에 기인한다.기인한다.

• 한국방사선학회논문지
• /
• 제10권5호
• /
• pp.337-341
• /
• 2016

중성자에너지 영역 0.003 eV에서 10 eV에 대해 천연 Sm의 Sm(n,${\gamma}$) 반응에 대한 중성자 포획단면적을 측정하였다. 교토대학교 원자로실험소의 46-MeV 전자선형가속기에서 발생되는 전자의 광핵반응에 의한 중성자를 사용하였고 TOF 방법으로 측정하였다. 사용한 검출기는 12개의 BGO($Bi_4Ge_3O_{12}$) 섬광체로 구성되었고 이 검출장치로 Sm(n,${\gamma}$) 반응으로부터 나오는 즉발감마선을 측정하였다. 검출장치는 중성자 생성 위치로부터 $12.7{\pm}0.02m$ 위치에 설치되었으며 $^{10}B(n,{\alpha}{\gamma})^7Li$ 반응을 이용해 Sm 시료에 입사되는 중성자 선속을 구하였다. 또한 중성자 선속의 변화를 확인하기 위해 $BF_3$ 검출기로 모니터링 하였다. Sm(n,${\gamma}$) 반응단면적 측정결과는 BROND 2.2에 의한 평가결과와 J. C. Chou 및 V. N. Kononov 의 측정값과 비교하였다.

• 한국지반공학회논문집
• /
• 제29권3호
• /
• pp.5-13
• /
• 2013

압축지수는 점토의 압축특성을 나타내는 대표적인 물성치로 압밀시험으로 직접 결정하거나, 점토의 기본 물성으로부터 경험적 방법으로 추정한다. 그러나 자연점토의 압축지수는 지반 물성치뿐 아니라 퇴적상태에 영향을 받으므로 경험적 추정방법은 지역적 한계를 지닌다. 본 연구에서는 재성형점토의 압축특성을 이용하여 지반 물성치로부터 자연 점토의 압축지수를 추정하는 새로운 방법을 제안하였다. 부산점토의 압밀시험 결과를 통해 제안방법의 적합성을 검증하였으며, 오차원인을 분석하였다. 분석결과 제안된 방법은 경험적 추정방법보다 압축지수를 정확하게 추정하였다. 제안방법의 오차는 가정사항에 의해 발생하며, 추정오차는 $e_{cross}/e_0$와 명확한 반비례 관계를 나타냈다.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.343-359
• /
• 2008

In the present study, an efficient method for the optimum design of three-dimensional (3D) steel framed structures is proposed. In this method, in addition to choosing the best position of columns based on architectural requirements, the optimum cross-sectional dimensions of elements are determined. The preliminary design variables are considered as the number of columns in structural plan, which are determined by a direct optimization method suitable for discrete variables, without requiring the evaluation of derivatives. After forming the geometry of structure, the main variables of the cross-sectional dimensions are evaluated, which satisfy the design constraints and also achieve the least-weight of the structure. To reduce the number of finite element analyses and the overall computational time, a new third order approximate function is introduced which employs only the diagonal elements of the higher order derivatives matrices. This function produces a high quality approximation and also, a robust optimization process. The main feature of the proposed techniques that the higher order derivatives are established by the first order exact derivatives. Several examples are solved and efficiency of the new approximation method and also, the proposed method for the best position of columns in 3D steel framed structures is discussed.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1563-1570
• /
• 2023

In this study, a DeCART/MIG uncertainty quantification (UQ) analysis code system with a multicorrelated cross section stochastic sampling (S.S.) module was established and verified through the UAM (Uncertainty Analysis in Modeling) and the BEAVRS (Benchmark for Evaluation And Validation of Reactor Simulations) benchmark calculations. For the S.S. calculations, a sample of 500 DeCART multigroup cross section sets for two major actinides, i.e., ²³⁵U and ²³⁸U, were generated by the MIG code and covariance data from the ENDF/B-VII.1 evaluated nuclear data library. In the three pin problems (i.e. TMI-1, PB2, and Koz-6) from the UAM benchmark, the uncertainties in k_inf by the DeCART/MIG S.S. calculations agreed very well with the sensitivity and uncertainty (S/U) perturbation results by DeCART/MUSAD and the S/U direct subtraction (S/U-DS) results by the DeCART/MIG. From these results, it was concluded that the multi-group cross section sampling module of the MIG code works correctly and accurately. In the BEAVRS whole benchmark problems, the uncertainties in the control rod bank worth, isothermal temperature coefficient, power distribution, and critical boron concentration due to cross section uncertainties were calculated by the DeCART/MIG code system. Overall, the uncertainties in these design parameters were less than the general design review criteria of a typical pressurized water reactor start-up case. This newly-developed DeCART/MIG UQ analysis code system by the S.S. method can be widely utilized as uncertainty analysis and margin estimation tools for developing and designing new advanced nuclear reactors.