• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2006

In cellular mobile communications, how to achieve optimum system capacity with limited frequency spectrum is one of the main research issues. Many dynamic channel assignment (DCA) schemes have been proposed and studied to allocate the channels more efficiently, thus, the capacity of cellular systems is improved. Reuse partitioning (RP) is another technique to achieve higher capacity by reducing the overall reuse distance. In this paper, we present a network-based DCA scheme with the implementation of RP technique, namely dynamic reuse partitioning with interference information (DRP-WI). The scheme aims to minimize the effect of assigned channels on the availability of channels for use in the interfering cells and to reduce their overall reuse distances. The performance of DRP-WI is measured in terms of blocking probability and system capacity. Simulation results have confirmed the effectiveness of DRP-WI scheme. Under both uniform and non-uniform traffic distributions, DRP-WI exhibits outstanding performance in improving the system capacity. It can provide about 100% capacity improvement as compared to conventional fixed channel assignment scheme with 70 system channels.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1221-1223
• /
• 1999

The safety loads in a nuclear power plant perform a critical function to plant safety. The design of the electrical auxiliary system should ensure the availability and adequacy of the power supply, and therefore, the frequency and voltage relaying schemes should be installed on the system to monitor and protect against the degraded system condition. If unforeseen contingencies degrade the switchyard frequency and voltage to below the minimum values, the safety related bus should properly be transferred to alternate power source. This paper presents guidelines associated with the protection of nuclear power plants during frequency/voltage decay and the steady-state and dynamic analysis of auxiliary power system that should be performed to support the degraded voltage relay(second level undervoltage relay) setting.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.4
• /
• pp.159-164
• /
• 2005

Various compensators are installed into the power system to operate the system economically and stably by maximizing the availability of utilities and power transmission capability. Fixed Capacitor(FC), Mechanical Switched Capacitor(MSC), and FACTS(Flexible AC Transmission Systems) are used to regulate voltage and power flow of the system. When a disturbance occurs in the power system, the Fixed Capacitor operates dependently on the voltage of the power system and cannot change the amount of installation automatically. But compared to other equipment, the Fixed Capacitor is more economical due to its low cost. Since MSC can change the amount of installation according to the state of the power system, operates more effectively than the Fixed Capacitor. FACTS have fast dynamic performance for the transient condition, but the cost is high. Therefore, it is needed to develop an optimized installation planning for the reactive power compensators by considering their dynamic performance and cost. In this paper, an optimized compensator combination and the proposed scheme is proposed and it is applied to KEPCO system in order to show its capabilities.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.3
• /
• pp.153-162
• /
• 2016

This paper proposes an optimal dynamic resource allocation method in IoT (Internet of Things) parking guidance system using Q-learning resource allocation model. In the proposed method, a resource allocation using a forecasting model based on Q-learning is employed for optimal utilization of parking guidance system. To demonstrate efficiency and availability of the proposed method, it is verified by computer simulation and practical testbed. Through simulation results, this paper proves that the proposed method can enhance total throughput, decrease penalty fee issued by SLA (Service Level Agreement) and reduce response time with the dynamic number of users.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.146-161
• /
• 1998

This article develops model of the nonstationary state behavior of the multiechelon spare parts provisioning systems. This study is concerned with a problem of determining the near optimal requirements level of the spare parts, especially Concurrent Spare Parts(CSP). CSP is supplied with the procurement of new equipment system, and is used to sustain the equipment without resupply during the initial coverage period. We consider this situation as a multiechelon inventory model with several bases and one depot. And we assume an equipment system which consists of many types of parts would grounded if one of the parts fail. Also this multiechelon CSP problem is considering the nonstationary poisson failure process and nonstationary exponential repair process in a dynamic environment. We develop an efficient computational procedure to find the near optimal number of spare parts minimizing the total expected cost, while achieving the required system availability. Finally we present a simple example of suggested method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.5
• /
• pp.223-230
• /
• 2008

Dynamic update of kernel can change kernel functionality and fix bugs in runtime. Dynamic update is important because it leverages availability, reliability and flexibility of kernel. An instruction-granularity update technique has been used for dynamic update. However, it is difficult to apply update technique for a commodity operating system kernel because development and maintenance of update code must be performed with assembly language. To overcome this difficulty, we design the function-granularity dynamic update system which uses high-level language such as C language. The proposed update system makes the development and execution of update convenient by providing the development environment for update code which is same for kernel development. We implement this system for Linux and demonstrate an example of update for EXT3 file system. The update was successfully executed.

• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.311-331
• /
• 2021

Climate change with extreme hydrological events has become a significant concern for agricultural water systems. Climate change affects not only irrigation availability but also agricultural water requirement. In response, adaptation strategies with soft and hard options have been considered to mitigate the impacts from climate change. However, their implementation has become progressively challenging and complex due to the interconnected impacts of climate change with socio-economic change in agricultural circumstances, and this can generate more uncertainty and complexity in the adaptive management of the agricultural water systems. This study was carried out for the agricultural water supply system in Seongju dam watershed in Seonju-gun, Gyeongbuk in South Korea. The first step is to identify system disturbances. Climate variation and socio-economic components with historical and forecast data were investigated Then, as the second step, problematic trends of the critical performance were identified for the historical and future climate scenarios. As the third step, a system structure was built with a dynamic hypothesis (causal loop diagram) to understand Seongju water system features and interactions with multiple feedbacks across system components in water, agriculture, and socio-economic sectors related to the case study water system. Then, as the fourth step, a mathematical SD (system dynamics) model was developed based on the dynamic hypothesis, including sub-models related to dam reservoir, irrigation channel, irrigation demand, farming income, and labor force, and the fidelity of the SD model to the Seongju water system was checked.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.34-43
• /
• 2000

Replicated data that is used for fault tolerant distributed system requires replica control protocol to maintain data consistency. The one of replica control protocols is quorum consensus method which accesses replicated data by getting majority approval. If site failure or communication link failure occurs and any one can't get quorum consensus, it degrades the availability of data managed by quorum consensus protocol. So it needs for ghost to replace the failed site. Because ghost is not full replica but process which has state information using meta data, it is important to simplify meta data. In order to maintain availability and simplify meta data, we propose a method to use cohort set as ghost's meta data. The proposed method makes it possible to organize meta data in 2N+logN bits and to have higher availability than quorum consensus only with cohort set and dynamic linear voting protocol. Using Markov model we calculate proposed method's availability to analyze availability and compare it with existing protocols.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1447-1453
• /
• 2014

This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

• International Journal of Contents
• /
• v.2 no.2
• /
• pp.10-16
• /
• 2006

In this paper, we propose a predictive resource metric region (RMR) based radio resource metric estimation (RRME) mechanism, which utilizes a resource metric mapping function (RMMF), both of which permit efficient inter-working between the physical layer and higher layers for envisaging multimedia service applications over a CDMA communication system platform. The RMR can provide the acceptable resource region where QoS and acceptable link quality can be guaranteed with an achievable resource margin to be utilized in terms of capacity margin, the degree of confidence (DCL) of user, second-order statistics of Eb/Io. With predicted capacity margin and variance, DCL can deliver decision parameters with which an adaptive QoS based admission control can perform well taking capacity and resource availability into account in a dynamic and predictive manner. Combined with advanced techniques such as adaptive modulation or rate control and power control, the proposed mechanism can adjust the conventional stringent link quality information efficiently, and deliver accurate information of the resource availability. Thus, these can guarantee the maximization of resource utilization of multimedia service applications.