• Spatial Information Research
• /
• v.19 no.3
• /
• pp.43-52
• /
• 2011

Recently, interest in location-based service (LBS) which utilizes a DBMS in mobile system environment has been increasing, and it is expected to overcome the existing file-based system's limitation in advanced in-vehicle system by utilizing DBMS's advantages such as efficient storage, transaction management, modelling and spatial queries etc. In particular, the road network data corresponds to the most essential domain in a route planning system, which needs efficient management and maintenance. Accordingly, this study aims to develop an efficient graph-based geodata model for topological network data and to support dynamic path computation algorithm based on heuristic approach in mobile LBS system. To achieve this goal, we design a data model for supporting the hierarchy of network, and implement a path planning system to evaluate its performance in mobile LBS system. Last but not least, we find out that the designed path computation algorithm with hierarchical graph model reduced the number of nodes used for finding and improved the efficiency of memory.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.705-715
• /
• 2005

A peer-to-peer web caching has been studied recently as it can reduce the traffic converged on the server side and can support the traditional web caching model. Although the peer-to-peer web caching has the merit of having additional cache space from the local caches of peers without additional infrastructure, several constraints such as dynamic participation and local caching strategy caused by the autonomy of peers in peer-to-peer networks nay limit the performance of the peer-to-peer web caching. To overcome these limitations, we propose an efficient directory-based peer-to-peer web caching system under dynamic participation of peers. In the proposed caching system, we present new peer selection and replica management schemes by introducing the concept of the object lifetime in P2P networks. We evaluate the effectiveness of the proposed system through trace-driven simulations with a web log dataset. Simulation results show that the proposed system has higher accuracy and fewer redirection failures than the conventional directory-based P2P web caching system in feasible peer-to-peer networks.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.153-159
• /
• 1989

This paper describes the algorithms employed in the preprocessing stage of the timing simulator, TSIM1.0, which is based on the Waveform Relaxation Method (WRM) at the CELL-level. The preprocessing stage in TSIM1.0 (1)partitions a given circuit into DC connected blocks (DCB's) (2) forms strongly connected circuts (SCC's) and (3) orders CELL's Also, the efficient waveform management technique for the WRM is described, which allows the overwriting of the waveform management technique for the WRM is described. which allows the overwriting of the waveform information to save the storage requirements. With TSIM1.0, circuits containing up to 5000 MOSFET's can be analyzed within 1 hour computation time on the IBM PC/AT. The simulation results for several types of MOS digital circuits are given to verify the performance of TSIM1.0.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.722-728
• /
• 2012

Urban sewer systems has a limitation of capacity of rainwater storage and problem of occurrence of untreated sewage, so adopting a storage facility for sewer flooding prevention and urban non-point pollution reduction has a big attention. The Korea Ministry of Environment has recently introduced a new concept of "multi-functional storage facility", which is crucial not only in preventive stormwater management but also in dealing with combined sewer overflow and sanitary sewer discharge, and also has been promoting its adoption. However, reserving a space for a single large-scale storage facility might be difficult especially in urban areas. Thus, decentralized construction of small- and midium-sized storage facilities and its operation have been introduced as an alternative way. In this paper, we propose a model predictive control scheme for an optimized operation of distributed storage facilities and sewer networks. To this aim, we first describe the mathematical model of each component of networks system which enables us to analyze its detailed dynamic behavior. Second, overflow locations and volumes will be predicted based on the developed network model with data on the external inflow occurred at specific locations of the network. MPC scheme based on the introduced particle swarm optimization technique then produces the optimized the gate setting for sewer network flow control, which minimizes sewer flooding and maximizes the potential storage capacity. Finally, the operational efficacy of the proposed control scheme is demonstrated by simulation study with virtual rainstorm event.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.457-464
• /
• 2006

Remarshalling operation is one of the operations considered important in an automated container terminal to perform quickly loading operations and delivery operations. It arranges the containers scattered at a verticla yard block in order to reduce the transfer time and the rehandling time of ATC(Automated Transfer Crane)s. This paper deals with the remarshalling planning problem minimizing the weighted operation time. This problem can be decomposed into 2 subproblems, storage space assignment problem and operation sequencing problem Storage space assignment problem decides to where containers are transported in terms of transportation time cost.. With results of a previous subproblem, operation sequence problem determines the ATC operation sequence, which minimizes the dead-heading of ATC This study formulates each subproblem with mixed integer program and dynamic program. To illustrate the proposed model, we propose an instance to explain the process of remarshalling planning.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.217-227
• /
• 2008

The electric power subsystems (EPS) of most remote sensing satellites consist of a solar array as a source of energy, a storage battery, a power management and control (PMC) unit and a charge equalization unit (CEU) for the storage battery. The PMC and CEU use high frequency transformers in their power modules. This paper presents a design, implementation and testing results of a high frequency transformer for the EPS of satellite applications. Two approaches are used in the design process of the transformer based on the pre-determined transformer specifications. The transformer is designed based on an ETD 29 ferrite core. The implemented transformer consists of one center-tapped primary coil with eleven center-tapped secondary coils. The offline calculation results and measured values of R, L for transformer coils are convergence. A test circuit for measuring the transformer parameters like voltage, current and B-H hysteresis was implemented and applied. The test results confirm that the voltage waveforms of both primary and secondary coils were as desired. No overlapping occurred between the control signal and the transformer, which was not saturated during testing even during a short circuit test of the secondary channels. The dynamic B-H loop characteristics of the used transformer cores were measured. The sample test results are given in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.1010-1014
• /
• 2002

A new type actuator has been designed and investigated to overcome thermal problems in slim optical disc drive which is adopted in mobile storage devices. Recently, in optical storage device technical trends, the size of optical disc drives is slimmer to adopt notebook computer and the spindle rotate velocity is faster to achieve high transfer rate and the power of actuator is higher to perform tilting, etc. However, these trends of optical disc drives tend to raise the environment temperature of drives, actuator power and parts temperature. Moreover, it is more difficult to remove the heat inside a drive and the temperature of an actuator increases and drive slims. As a result, increase of surface temperature of actuator body caused that second resonance of an actuator moves down to a lower frequency band and the performance of optical parts also deteriorates. Especially objective lens, coil and magnet of the actuator parts are easily damaged. To manage these thermal problems, in this paper an actuator with a hybrid blade, which is composed of vectra which has low thermal conductivity and magnesium which has high thermal conductivity, has been suggested and verified. Despite the high temperature environment, the proposed actuator showed good dynamic performance.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.87-100
• /
• 2004

XML has recently considered as a new standard for data presentation and exchange on the web, many researches are on going to develop applications and index mechanism to store and retrieve XML documents efficiently. In this paper, design a Main-Memory based XML storage system for efficient management of XML document. And propose structured retrieval of XML document tree which reduce the traverse of XML document tree using element type information included user queries. Proposed indexing mechanism has flexibilities for dynamic data update. Finally, for query processing of XML document include Link information, design a index structure of table type link information on observing XLink standards.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.1043-1063
• /
• 2019

With delegating proxy to process data before outsourcing, data owners in restricted access could enjoy flexible and powerful cloud storage service for productivity, but still confront with data integrity breach. Identity-based data auditing as a critical technology, could address this security concern efficiently and eliminate complicated owners' public key certificates management issue. Recently, Yu et al. proposed an Identity-Based Public Auditing for Dynamic Outsourced Data with Proxy Processing (https://doi.org/10.3837/tiis.2017.10.019). It aims to offer identity-based, privacy-preserving and batch auditing for multiple owners' data on different clouds, while allowing proxy processing. In this article, we first demonstrate this scheme is insecure in the sense that malicious cloud could pass integrity auditing without original data. Additionally, clouds and owners are able to recover proxy's private key and thus impersonate it to forge tags for any data. Secondly, we propose an improved scheme with provable security in the random oracle model, to achieve desirable secure identity based privacy-preserving batch public auditing with proxy processing. Thirdly, based on theoretical analysis and performance simulation, our scheme shows better efficiency over existing identity-based auditing scheme with proxy processing on single owner and single cloud effort, which will benefit secure big data storage if extrapolating in real application.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.281-291
• /
• 2007

Wearable computers consisting of various small devices such as smart phones, digital cameras, MP3 players and specialized I/O devices in personal area networks will play an important role in future ubiquitous computing. In this environment, accessing user data is quite complex due to the dynamic and heterogeneous characteristics of the underlying networks. Moreover, since the amount of user data increases rapidly, automatic data backup management is also critical. To overcome these challenges, several studies have been conducted including our previously proposed file service system, PosCFS, which could be adapted to the requirements with a virtualization technique allowing per-user global namespace for managing and accessing data stored on physical storage spaces detected in PAN. In this paper, we present a smart file service framework, PosCFS+ which is an improved and extended version of our previous work. Performance improvement is made possible by redesigning the metadata management scheme based on database and keywords rather than ontology. In addition, the automatic data replication management is newly designed based on the OSD protocol.