• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.112-122
• /
• 2004

In this paper, we propose a mobility estimation model based on inner regions in a cell and a dynamic resource reservation scheme which can control dynamically classes of mobile hosts on the mobile network. The mobility estimation model is modeled based on the reducible Markov chain. And the mobility estimation model provides a new hand off probability and a new remaining time for the dynamic resource reservation scheme. The remaining time is n estimated time that mobile hosts can stay in a cell. The dynamic resource reservation scheme can reserve dynamically a requested resource according to the classes of mobile hosts. This scheme can efficiently improve the connection blocking probability and connection dropping probability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.75-79
• /
• 2019

Purpose Cadmium-zinc-telluride (CZT) camera with semiconductor detector is capable of dynamic myocardial perfusion SPECT for coronary flow reserve (CFR). Image acquisition with the heart positioned within 2 cm in the center of the quality field of view (QFOV) is recommended because the CZT detector based on focused multi-pinhole collimators and is stationary gantry without rotation. The aim of this study was to investigate the optimal method for measuring position of the heart within the center of the QFOV when performing dynamic myocardial perfusion SPECT with the Discovery NM 530c camera. Materials and Methods From June to September 2018, 45 patients were subject to dynamic myocardial perfusion SPECT with D530c. For accurate heart positioning, the patient's heart was scanned with a mobile ultrasound and marked at the top of the probe where the mitral valve (MV) was visible in the parasternal long-axis view (PLAX). And, the marked point on the patient's body matched with the reference point indicated CZT detector in dynamic stress. The heart was positioned to be in the center of the QFOV in rest. The coordinates of dynamic stress and rest were compared statistically. Results The coordinates of the dynamic stress using mobile ultrasound and those taken of the rest were recorded for comparative analysis with regard to the position of the couch and analyzed. There were no statistically significant differences in the coordinates of Table in & out, Table up & down, and Detector in & out (P > 0.05). The difference in distance between the 2 groups was measured at $0.25{\pm}1.00$, $0.24{\pm}0.96$ and $0.25{\pm}0.82cm$ respectively, with no difference greater than 2 cm in all categories. Conclusion The position of the heart taken using mobile ultrasound did not differ significantly from that of the center of the QFOV. Therefore, The use of mobile ultrasound in dynamic stress will help to select the correct position of the heart, which will be effective in clinical diagnosis by minimizing the image quality improvement and the patient's exposure to radiation.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.857-863
• /
• 2011

Due to uncertainties in target motion and randomness of deployed sensor nodes, the problem of imbalance of energy consumption arises from sensor scheduling. This paper presents an energy-efficient adaptive sensor scheduling for a target monitoring algorithm in a local monitoring region of wireless sensor networks. Owing to excessive scheduling of an individual node, one node with a high value generated by a decision function is preferentially selected as a tasking node to balance the local energy consumption of a dynamic clustering, and the node with the highest value is chosen as the cluster head. Others with lower ones are in reserve. In addition, an optimization problem is derived to satisfy the problem of sensor scheduling subject to the joint detection probability for tasking sensors. Particles of the target in particle filter algorithm are resampled for a higher tracking accuracy. Simulation results show this algorithm can improve the required tracking accuracy, and nodes are efficiently scheduled. Hence, there is a 41.67% savings in energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.7-16
• /
• 2003

Handover is very important to support the mobility of user because wireless ATM networks have smaller cell size such as micro/pico cell for broadband mobile multimedia service In this paper, we propose dynamic path reservation handover scheme for fast inter-MSC (Mobile Switching Center) handovers To reduce the handover delay for connection re-routing, the proposed scheme reserves virtual channels from nearest common node to neighbor MSC in advance Especially, our handover scheme predicts the number of inter-MSC handover calls at each period by the prediction algorithm and reserve virtual channels The simulation and analysis results show that our scheme reduce handover complexity and has higher reservation channel utilization, compared with DVCT scheme.

• Smart Structures and Systems
• /
• v.20 no.3
• /
• pp.311-328
• /
• 2017

The characteristics of boundary layers have significant effects on the aerodynamic forces and vibration of the wind turbine blade. The incorporation of active trailing edge flaps (ATEF) into wind turbine blades has been proven as an effective control approach for alleviation of load and vibration. This paper is aimed at investigating the effects of external trailing edge flaps on the flow pattern and velocity distribution within a boundary layer of a NREL 5MW reference wind turbine, as well as designing a new type of velocity sensors for future validation measurements. An aeroelastic-aerodynamic simulation with FAST-AeroDyn code was conducted on the entire wind turbine structure and the modifications were made on turbine blade sections with ATEF. The results of aeroelastic-aerodynamic simulations were combined with the results of two-dimensional computational fluid dynamic simulations. From these, the velocity profile of the boundary layer as well as the thickness variation with time under the influence of a simplified load case was calculated for four different blade-flap combinations (without flap, with $-5^{\circ}$, $0^{\circ}$, and $+5^{\circ}$ flap). In conjunction with the computational modeling of the characteristics of boundary layers, a bio-inspired hair flow sensor was designed for sensing the boundary flow field surrounding the turbine blades, which ultimately aims to provide real time data to design the control scheme of the flap structure. The sensor element design and performance were analyzed using both theoretical model and finite element method. A prototype sensor element with desired bio-mimicry responses was fabricated and validated, which will be further refined for integration with the turbine blade structures.

• Environmental and Resource Economics Review
• /
• v.13 no.2
• /
• pp.301-322
• /
• 2004

The current petroleum stockpiling by Korean government is based on the static concept of dead-stock. However, the recent changes in economic environment is requiring a transition to the dynamic concept of flow-stock. This study suggested selective trading strategies using basis of changing oil prices as an option for improving the economics of domestic strategic petroleum reserve (SPR), and quantitatively analyzed their effects. For this purpose, we tested the validity of selective trading strategies using the weekly spot and forwards prices of WTI for the period of October 1997 to August 2002. Summarizing the simulation results, the selective trading strategies would increase the expected values of profits and decrease their volatilities compared to those of traditional routine strategies. And, the adoption of trigger value could increase the improvements by the selective trading strategies. Based on the results, we suggest that, in order to improve the economics of domestic petroleum stockpiling, it is necessary to actively utilize the reserve facilities and the reserved petroleum with proper derivatives position.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.594-602
• /
• 1986

This paper proposes an effective algorithm for short-term generation scheduling for the purpose of economic and secure operation of thermal power systems. Especially, in the procedure of solution by Dynamic Programming, Linear Programming is introduced to promote the possibility of optimal solution and the security of power systems, and evaluation of security function is improved by the application of seven step approximation of normal distribution. Several necessary considerations, that is, time dependent start-up and constant down cost of generating units, demand and spinning reserve constraints, minimum up and sown time constraints, the number of possible start-up of a generating unit in a d and the number of generating units which can be started up at the same time at the same bus, are also incoporated to elevate the usability and flexibility of the algorithm. Finally, the effectiveness of the proposed algorithm has been demonstrated by applying to the 6-gen. 21-bus model power system.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.216-217
• /
• 2006

This paper presents development of program for generator maintenance scheduling. The maintenance scheduling of generating units is a dynamic discrete combinatorial optimization problem with constraints to determine the optimal maintenance periods of each generating units for a given planning periods. The developed program is designed so as to provide the maintenance schedule satisfying the operating reserve margin levelization and the procurement of proper reliability. In order to verify the effectiveness of the developed program, the numerical study has been performed with the practical data in 2005.

• The Korean Journal of Rehabilitation Nursing
• /
• v.11 no.2
• /
• pp.67-73
• /
• 2008

Purpose: The purpose of this study was to review and identify the meaning and components of the concept, Frailty. Method: We conducted literature review of studies that concluded the word of 'frail' or 'frailty between 1980 and 2008, and used MEDLINE, CINAHL database to select the articles. Results: Frailty is defined as a concept with multidomains, which are physical, cognitive, psychological, social. Critical characteristics of Frailty include multidominal deficiency, combined accumulation, diminished ability to keep up the independence of daily living, states beyond one's reserve capacity, dynamic relativity, proximity to adverse health outcome, aggregated symptoms. Frailty is caused by decreased physical activity, loss of sensory function, Chronic symptoms or signs, relationship with Caregiver, social isolation. Moreover, Frail elderly is at risk of falls and institutionalization. Conclusion: Frailty is very useful concept, because it has the potential to identify the elderly population at risk of adverse health outcomes. Based on this results, the appropriate tool for screening Korean Frail elderly and Nursing intervention for them needs to be developed.