• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1232-1240
• /
• 2001

In this study. a computer simulation of the Korean High Speed Prototype Test Train was performed to investigate the dynamic behavior(running stability. safety and comfort) in detail design process. The simulation model which was prepared by ADAMS/Rail V10.l consists of power car and middle car assembly (2 motorized cars ＋ 3 trailer cars). The nonlinear analysis takes into account the full vehicle model including wheel/rail contact and the influence of disturbed track. Throughout the dynamic calculation of KHST on the straight and the curved track. accelerations in car body. ride comforts and wheel rail forces were investigated.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제17권2호
• /
• pp.103-113
• /
• 2013

We analyze the queueing model for leaky bucket (LB) scheme with dynamic arrivals and token rates. In other words, in our LB scheme the arrivals and token rates are changed according to the buffer occupancy. In telecommunication networks, the LB scheme has been used as a policing function to prevent congestion. By considering bursty and correlated properties of input traffic, the arrivals are assumed to follow a Markov-modulated Poisson process (MMPP). We derive the distribution of system state, and obtain the loss probability and the mean waiting time. The analysis is done by using the embedded Markov chain and supplementary variable method. We also present some numerical examples to show the effect of our proposed model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.750-755
• /
• 2012

In this study we conduct the optimal spot-weld layout design of vehicle body structure considering dynamic stiffness and side impact. We conduct both linear static analysis and nonlinear analysis with a baseline model to verify the process. 13 design variables will be selected for the effect analysis. Then, topology optimization is conducted to each selected design variable. The design constraints are formulated to improve the dynamic stiffness and side impact performance. Objective function is to set the density of weld component. Optimal spot-weld layout design are compared with the baseline model to show the improvement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.192-199
• /
• 2002

In continuous galvanizing process, the mass of zinc deposited and its distribution are controlled by the air pressure, effective distance from the air knife nozzle to the steel strip surface and line speed. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. This paper investigates the main cause of coating deviation and a new air knife system for control of coating thickness was developed. We investigate dynamic pressure variation by air knife types. It is found that the coating deviation is caused by the unbalance of dynamic pressure, the irregularity of strip position, and the strip vibration. Formulating a useful coating model by using present working condition, an optimal working condition is suggested. The productivity and coating quality are improved by applying the result of this research at the shop floor.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.46-54
• /
• 2004

A cutting force model predicting the dynamic force induced by the axial vibration of it plate in face milling is introduced. When a plate face is milled, deformation in tool axial direction is considerable. Therefore, cutting forces are affected by not only inner-outer modulation in feed direction but also by axial deformation. A PTP (peak-to-peak) diagram made by the simulated dynamic force model is evaluated. The stability of the face milling process such as the chatter outset, and the stable cutting region can be simply estimated. Simulation results are compared with that of experiment.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.155-159
• /
• 2005

High speed presses with high resolution in semiconductor lead frame manufacturing process are needed . But high speed operation accompanies mechanical vibration. therefore optimized kinematic structure to minimize vibration is required for a high speed press. And the growing competition in the industry asks a press with low cost, high speed, high resolution, and high pressing force, For this purpose a high speed press was modeled with 3D CAD solid modeling system and dynamic analysis were performed with CAE S/W for multibody dynamic analysis, Through these analyses a motor appropriate to a high speed press was selected and link structure for feeding system of the press was modified to reduce vibration. To perform this analysis working Model which is 2D kinematics and dynamic analysis software was used.

• 대한환경공학회지
• /
• 제37권12호
• /
• pp.689-695
• /
• 2015

부착성 미생물을 이용하여 기체상 오염물질을 여과 방식으로 처리하는 생물 공정은 기체상의 흐름 특성과 공정 인자간 관련성이 매우 복잡하게 작용하는 특징을 가진다. 본 연구는 기체상 공정의 특성으로 미세한 변화에도 반응이 급변하는 현상과 물질간 반응관계의 중요성을 고려하여 일반화된 plug flow계 반응조의 공정 분석 도구로 활용 가능한 1차원 동적 수치해석 모델을 개발하였다. 개발 모델은 물질수지 원리를 기초하여 확산을 단순화하고 물질간 경쟁, 상승, 억제 반응 등 상호 반응관계를 반영하여 구성이 용이하도록 하였다. 개발 모델의 적용성 평가는 저속과 고속으로 구분된 BTX 제거 실험에 대하여 보정과 검정 절차로 수행되었다. 개발 모델은 고속 조건의 toluene을 제외하고 모든 조건과 항목에서 상관계수($R^2$) 0.79 이상에서 실험 결과를 재현하였다. 개발 모델은 연속흐름(plug flow)계로써 기체상-생물막의 일반화된 공정에 적용할 수 있는 것으로 평가되었으며 복잡하고 다양한 공정 실험에서 설계 인자 분석 및 효율 평가에 유용한 도구로 사용될 수 있다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권3호
• /
• pp.241-253
• /
• 2003

SDR(Software Defined Radio, 소프트웨어 기반 무선 통신) 포럼에서 표준으로 인정된 SCA(Software Communication Architecture)는 내장형 시스템 소프트웨어의 설계 패턴을 잘 활용한 프레임워크를 제공하고 있다. 그러나 SCA는 (1) 컴포넌트 인터페이스를 표현하고 이를 구현하는 방법에 대하여 정의하는 컴포넌트 모델과 (2) 배치 단위에 무엇을 어떻게 패키지할 지에 대하여 정의하는 패키지 모델, 그리고 (3) 배치 환경과 절차를 정의하는 배치 모델에 대한 명시적인 표준을 제시하지 않고 있어 컴포넌트 프레임워크로서 부족한 문제점이 있다 본 논문에서는 SCA를 기반으로 하여 SDR을 위한 컴포넌트 프레임워크를 제시한다. 구체적으로 (1) 객체 관리 기능을 지원하는 특성화된 CORBA 객체로서의 컴포넌트를 정의하는 컴포넌트 모델, (2) SCA의 XML 디스크립터를 활용하는 패키지 모델, (3) SCA 기반의 배치 환경, 배치 상태를 복구하는 시동 절차, 느린 응용 인스턴스화와 동적 컴포넌트 교체를 지원하는 배치 절차를 정의하는 배치 모델을 제시한다.

• 대한인간공학회지
• /
• 제25권3호
• /
• pp.49-60
• /
• 2006

Technological encroachment provides human operators with flood of information that must be analyzed to understand the environment and make judgments that lead to strategic actions. Further, the environment is not static and therefore uncertain, changing its aspect dynamically. Complexity accompanied with its dynamics imposes substantial difficulty to human operators' task. Criticality of having situational understanding becomes more important than ever. Situationalunderstanding requires the human operators possessing tacit knowledge in order for them to make the sense out of the situation while interacting with information from many heterogeneous sources, the notion of sensemaking. Sensemaking refers to the process of developing mental framework to assemble pieces of information representing different aspects of the environment that can be used to develop one's own actionable knowledge to implement their judgments in the uncertain environment. Therefore, judgment process and performance is a key component of sensemaking process. Among many judgment and decision making models, the lens model with its extension can be utilized to partially describe the judgmental aspect of sensemaking. One of the lens model parameters, unmodeled knowledge, can be a corresponding quantitative measure for the tacit knowledge that plays an important role in sensemaking. In this paper, a comprehensive literature for sensemaking is provided to formally define the notion of sensemaking in the military domain. Also, it is proposed that there is a crucial link between the sensemaking and human judgment process and performance from the lens model perspective. Potential implications for experimental framework are also proposed.

• 폴리머
• /
• 제35권3호
• /
• pp.196-202
• /
• 2011

비즈페놀 A 에폭시 수지와 폴리옥시프로필렌 디아민 경화제계의 경화 반응속도를 시차주사열량계을 이용하여 승온 및 등온 경화조건에서 조사하였다. 승온실험에서는 Ozawa와 Kissinger법을 이용하여 다양한 가열속도에서 얻어진 발열피크의 이동으로부터 활성화 에너지를 구하였다. 또한 등온실험에서 얻어진 데이터는 자촉매 효과를 고려한 Kamal의 속도모델로 분석하였으며, 그 결과 경화반응 초기의 속도우세 구간에서 실험데이터와 잘 맞았다. 반응 후기의 확산우세 구간에서는 확산효과를 적용하여 경화의 전체과정을 기술하였다. 또한 동역학분석을 이용하여 경화 후 저장 탄성률과 가교점간의 평균분자량을 측정하였다.