• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.696-703
• /
• 2005

Recently, the collision problems between a bridge and a navigating ship are frequently issued at the stage of structure design. Even the many study results about vessel to vessel collision are presented, but the collision studies between vessel and bridge structure have been hardly presented. In this study, nonlinear dynamic analysis of vessel and fender system carry out using ABAQUS/Explicit commercial program with consideration of some parameters, such as bow structure we composed to shell element also ship's hull is modeling to beam element. Also, buoyancy effect is considered as spring element. The two types of fender systems was comparable with both collision analysis about steel materials fender system and rubber fender system On the purpose of study is analyzed the plasticity dissipated energy of vessel and fender system. We blow characteristic that kinetic energy is disappeared by plastic large deformation in case of collision. Also, We considered dissipated kinetic energy considering friction effect.

• 상하수도학회지
• /
• 제13권4호
• /
• pp.45-53
• /
• 1999

The microbial organisms named "Pseudomonas sp. LK-14" were isolated from farm land and shallow river sediment, activated, augmented and identified; which were using 2,4-D (2,4-Dichlorophenoxyacetic acid) as a sole carbon source and energy source. 2,4-D removal efficiency of LK-14 with 2,4-D sole carbon source (reactor S) were higher than that of Activated Sludge with 2,4-D sole carbon source (reactor A). Dynamic bioligical reaction kinetic parameters (sole carbon source was 2,4-D) obtained from batch reactor experiments were ${\mu}_{max}$ $0.105hr^{-1}$, $K_{s,24D}$ 15.64mg/L, $K_{i,24D}$ $1.94h^{r-1}$, $Y_{24D}$ 0.39 for LK-14 and ${\mu}_{max}$ $0.008hr^{-1}$, $K_{s,24D}$ 26.95mg/L, $K_{i,24D}$ $1.75hr^{-1}$, $Y_{24D}$ 0.10 for Activated Sludge. Using these parameters, we could predict the behaviors of 2,4-D substrate utilized by LK-14 and Activated Sludge in batch reactors. The kinetic parameters are enable to predict the 2,4-D substrate and microbial population behavior entering into wastewater treatment plants by using unsteady states dynamic simulation modeling technique.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.298-307
• /
• 2016

In the building process of FPSOs(floating production, storage and offloading units) is the increasing demand of high performance piping joints that can be installed on its turret system and maintain smooth and long-term flow of ultra-high pressure crude oil, being subjected to external excitations such as wind and wave on the sea. Following such a trend, in this paper, a new-type piping joint of four effective degrees of freedom has been designed, and its dynamic characteristics predicted through mathematical modeling and computer simulations. Moreover, via an example it was shown how the yaw motion in particular can be independently controlled for future durability test despite strong kinetic couplings.

• 한국수산과학회지
• /
• 제43권3호
• /
• pp.205-210
• /
• 2010

Dynamic modeling was used to predict the Pseudomonas spp. concentration in Alaska pollack under dynamic temperature conditions in a programmable incubator using Euler's method. The model evaluation showed good agreement between the predicted and measured concentrations of Pseudomonas spp. In the simulation, three kinds of distribution path were assumed: consumers buying from a distribution center (A), manufacturer (B), or direct market (C). Each of these distribution paths consists of six phases: shipping, warehousing/shipment, warehousing/storing, processing, market exhibition, and sale/consumption. Sensitivity analysis of each phase was also implemented. The Pseudomonas concentrations and sensitivities ($S_k$) at the terminal phases of the three paths were estimated to be (A) 11.174 log CFU/g and 10.550 log $S_k$, (B) 10.948 log CFU/g and 10.738 log $S_k$, and (C) 8.758 log CFU/g and 9.602 log $S_k$, respectively. The sensitivities indicated that path A has the highest risk of failure in managing the relevant phases.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1021-1029
• /
• 1992

본 연구에서는 거대한 평판형 격자구조물에 대한 등가 연속체모델을 유도하기 위한 보다 간편하고 합리적인 방법을 개발하고, 예제해석을 통해 새로이 개발된 방법 의 타당성을 보이는데 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.688-692
• /
• 2000

This study proposed design parameters of opening spring of circuit breaker that cut off the over-current in order to protect the electric device about opening speed using the energy method. We simulated the opening kinetic energy, the potential energy of opening spring and the design parameters of opening spring with respect to opening speed of VCB (Vacuum Circuit Breaker)'s moving contactor which has 24kV 25kA break capacity. From the result of simulation the initial tensional force and the final tensional force of the opening spring chose 107kgf and 282kgf respectively. Through the dynamic analysis using ADAMS, We verified that the opening speed of moving contactor satisfied break capacity of VCB and analyzed opening dynamic characteristics of VCB such as the opening displacement, the opening velocity and the opening acceleration of moving contactor in time domain.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.173-184
• /
• 1990

본 연구에서는 활성슬러지 하수처리장에 유입된 PAHs의 일종인 anthracene을 대상으로 이의 농도분포, 물리적 혹은 생물학적 변환을 예측하기 위한 수학적 모형을 제안하였다. 이 수학적 모형은 유입 anthracene의 volatilization, biodegradation 및 adsorption/desorption과 같은 반응을 고려한 5개의 연립미분방정식으로 구성되어 있으며, 이들에는 7개의 kinetic rate constants와 18개의 input variables를 포함하고 있다. Steady state simulation의 결과 유입된 anthracene은 1차 침전지에서의 슬러지 배출로 인하여 약 33%가 포기조에서 발생한 volatilization에 의하여 약 61%가 제거되어, 총괄적인 anthracene의 제거율은 약 97%정도이었다. Dynamic simulation의 결과로 본 연구대상 system의 경우에 system이 steady state에 도달하는 시간은 약 160시간 정도로 예측되었다. 이와 아울러 본 연구에서 제안된 수학적 모형의 활용 가능성이 각종 simulation의 결과로 비교적 구체적으로 규명되었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1819-1824
• /
• 2006

The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.28-36
• /
• 2010

Current tanks have been developed to increase mobility and firepower, and its maximum range and destructive power are improved. This great change causes remained vibration of a gun barrel after firing. For this reason, people are trying to control vibration of gun barrel effectively. This thesis presents a modeling method and analysis results for gun barrel by using a thermal shroud as an absorber mass. DTS(Dynamically Tuned Shroud) is a vibration damping system using a thermal shroud as an added mass for decreasing remained vibration. The model has an advantage that the gun barrel's vibration can be decreased by dissipating a kinetic energy of thermal shroud without install an additional dynamic absorber to tip of the gun barrel. For analyzing the damping performance of the DTS, We derived an equation of motion of the barrel after setting a mathematical modeling, and found out the frequency analysis and tendency according to stiffness ratio between barrel and shroud.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.794-805
• /
• 1999

Pneumatic cushioning cylinders are commonly employed for vibration and shock control. A mathematical simulation model of a double acting pneumatic cushioning cylinder designed to absorb shock loads is presented which is based on the following assumptions; ideal equation of state isentropic flow through a port conservation of mass polytropic thermodynamics single degree of freedom piston dynamics and energy equivalent linear damping. These differential equation can be solved through numerical integration using the fourth order Runge-Kutta method. An experimental study was conducted to validate the results obtained by the numerical integra-tion technique. Simulated results show good agreement with experimental data. The computer simulation model presented here has been extremely useful not only in understanding the has been extremely useful not only in understanding the basic cushioning but also in evaluating different designs.