• 제목/요약/키워드: Dynamic exposure conditions

검색결과 31건 처리시간 0.021초

Effects of Ag Nanoparticle Flow Rates on the Progress of the Cell Cycle Under Continuously Flowing "Dynamic" Exposure Conditions

  • Park, Min Sun;Yoon, Tae Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권1호
    • /
    • pp.123-128
    • /
    • 2014
  • In this study, we have investigated the flow rate effects of Ag nanoparticle (NP) suspensions on the progress of the cell cycle by using a microfluidic image cytometry (${\mu}FIC$)-based approach. Compared with the conventional "static" exposure conditions, enhancements in G2 phase arrest were observed for the cells under continuously flowing "dynamic" exposure conditions. The "dynamic" exposure conditions, which mimic in vivo systems, induced an enhanced cytotoxicity by accelerating G2 phase arrest and subsequent apoptosis processes. Moreover, we have also shown that the increases in delivered NP dose due to the continuous supply of Ag NPs contributed dominantly to the enhanced cytotoxicity observed under the "dynamic" exposure conditions, while the shear stress caused by these slowly flowing fluids (i.e., flow rates of 6 and $30{\mu}L/h$) had only a minor influence on the observed enhancement in cytotoxicity.

양생조건이 경량골재 콘크리트의 ASR에 미치는 영향 (Effect of Curing Conditions on the ASR of Lightweight Aggregate Concrete)

  • 성찬용;김성완;민정기
    • 한국농공학회지
    • /
    • 제35권4호
    • /
    • pp.38-46
    • /
    • 1993
  • This study is to analyze effect of exposure environment and mode of ASR on the engineering properties of synthetic lightweight aggregate concrete, such as dynamic modulus of elasticity and ultrasonic pulse velocity. The results of this study are summarized as foflows ; 1. The expansion rate of each exposure environment in 380$^{\circ}$C and NaCI 4% solution was shown higher than in 20$^{\circ}$C and normal water. The expansion rate of each exposure mode was largely shown in order of fjill immersion, wetting/drying, half immersion. 2. The dynamic modulus of elasticty and ultrasonic pulse velocity of each exposure environment in 38$^{\circ}$C and NaCl 4% solution was shown less than in 20$^{\circ}$C and normal water. The dynamic modulus of elasticity and ultrasonic pulse velocity of each exposure mode was shown smaller in order of full immersion, wetting/drying, half imersion.3. The relation between dynamic modulus of elasticity and ultrasonic pulse velocity was highly significant. The dynamic modulus of elasticity was increased with increase of ultrasonic pulse velocity. The decreasing rate of the dynamic modulus of elasticity was shown 2.1~3.4 times higher than the ultrasonic pulse velocity at each age, exposure environment and mode, respectively. 4. The expansion of each exposure environment and mode was increased with increase of curing age. The dynamic modulus of elasticity and ultrasonic pulse velocity of those concrete was increased with increase of curing age. At the curing age 28 days, the highest properties was showed at each type concrete, it was gradually decreased with increase of curing age. Specially, at the curing age 98 days of full immersion, the rate of expansion of type D was shown 3.95 times higher than the type A. But the dynamic modulus of elasticity and ultrasonic pulse velocity was decreased 17% and 8.3%.

  • PDF

Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes

  • Bassuoni, M.T.;Nehdi, M.L.
    • Computers and Concrete
    • /
    • 제5권6호
    • /
    • pp.573-597
    • /
    • 2008
  • Among artificial intelligence-based computational techniques, adaptive neuro-fuzzy inference systems (ANFIS) are particularly suitable for modelling complex systems with known input-output data sets. Such systems can be efficient in modelling non-linear, complex and ambiguous behaviour of cement-based materials undergoing single, dual or multiple damage factors of different forms (chemical, physical and structural). Due to the well-known complexity of sulfate attack on cement-based materials, the current work investigates the use of ANFIS to model the behaviour of a wide range of self-consolidating concrete (SCC) mixture designs under various high-concentration sodium sulfate exposure regimes including full immersion, wetting-drying, partial immersion, freezing-thawing, and cyclic cold-hot conditions with or without sustained flexural loading. Three ANFIS models have been developed to predict the expansion, reduction in elastic dynamic modulus, and starting time of failure of the tested SCC specimens under the various high-concentration sodium sulfate exposure regimes. A fuzzy inference system was also developed to predict the level of aggression of environmental conditions associated with very severe sodium sulfate attack based on temperature, relative humidity and degree of wetting-drying. The results show that predictions of the ANFIS and fuzzy inference systems were rational and accurate, with errors not exceeding 5%. Sensitivity analyses showed that the trends of results given by the models had good agreement with actual experimental results and with thermal, mineralogical and micro-analytical studies.

디지털 방사선에서 조사선량과 관전압조절에 의한 원본영상과 처리영상 분석 (Analysis of Original and Processing Image by Control of Exposure Dose, kVp in Digital Radiography)

  • 김보라;류신영;석진영;최준구
    • 대한디지털의료영상학회논문지
    • /
    • 제13권1호
    • /
    • pp.49-53
    • /
    • 2011
  • Dynamic range on the digital detector can be a representation to the ratio of maximum and minimum of pixel value. Wide dynamic range and post processing ability of the digital detector made difficult to recognize visually to high or low dose images. We were evaluated a change of mean pixel value on the original and processed image, when we controlled the kVp, mA, exposure time on the digital detector. On the kVp of a constant condition, we were acquired an original and processed image by changes of mA, exposure time. According to the thickness of the subject under the same conditions, to determine a relation of pixel value and X-ray intensity, we used an aluminum step wedge. When mA and exposure times were changed under the kVp of a constant condition, the X-ray intensity was decreased by the reduction of the mean pixel value. In addition when kVp was increased in a constant condition of mAs, the mean pixel value was increased according to the increment of the X-ray intensity. Therefore, low kVp, high mA and short exposure time were a way to reduce a patient dose.

  • PDF

충격 공진 기법을 이용한 화재 손상 콘크리트의 재양생 조건별 재료물성 평가 (Evaluation of Material Properties of Fire-damaged Concrete Under Post-fire Curing Regimes Using Impact Resonance Vibration Method)

  • 박선종;임홍재
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권5호
    • /
    • pp.42-48
    • /
    • 2017
  • 콘크리트 구조물이 화재 손상을 입을 경우 노출온도 및 지속시간에 따라 구조물의 심각한 성능 저하를 야기하며, 콘크리트의 재료 물성 저하를 수반한다. 화재 손상을 입은 콘크리트 구조물의 재사용여부 및 보수보강 판단을 위해서는 손상 직후 및 재양생 조건에 따른 주요 손상 부위의 면밀한 손상 평가가 필요하다. 본 연구에서는 재양생 조건에 따른 화재 손상을 입은 콘크리트의 재료물성 회복에 관한 실험적 연구를 수행하였다. 화재 손상을 입은 콘크리트 시편을 상대습도 및 재양생 기간을 달리한 재양생 조건을 적용하였으며, 충격공진기법을 도입하여 콘크리트 시편의 화재 손상 전후 및 재양생 이후의 동탄성계수를 측정하여 손상 정도를 평가하였다. 측정된 결과로부터 재양생 조건 중 높은 상대습도 조건에서 지배적으로 재료물성의 회복이 발생하였다. 추가적으로 콘크리트 시편의 동탄성계수 및 인장강도의 직접적인 비교 및 선형회귀분석을 수행하여 재양생 조건에 따른 영향을 분석하였으며, 이를 토대로 높은 습도 조건에서 동탄성계수의 회복이 인장강도에 비해 두드러지게 나타남을 확인하였다.

가속노화시험을 이용한 틸팅차량 차체 복합재의 노화특성 (Aging Characteristics of Composite Materials in Carbody of Tilting Train using Accelerated Aging Test)

  • 윤성호;김용구;남정표;신광복;구동회
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.333-338
    • /
    • 2003
  • Polymeric composite structures used in ground transportation applications such as the carbody of tilting train may be exposed to a ground environmental conditions during long-term missions. In this study, the degradation of mechanical and physical properties of graphite/epoxy composite and glass fabric/phenol composite under ground environmental conditions was investigated. Accelerated environmental conditions of ultraviolet radiation, temperature, and moisture were considered. Several types of specimens were used to investigate the effects of environmental conditions on mechanical properties of the composites. Also, storage shear modulus, loss shear modulus, and tan 8 were measured as a function of exposure times through a dynamic mechanical analyzer. Finally, composite surfaces exposed to environmental conditions were examined using a scanning electron microscope.

  • PDF

Static and dynamic mooring analysis - Stability of floating production storage and offloading (FPSO) risers for extreme environmental conditions

  • Rho, Yu-Ho;Kim, Kookhyun;Jo, Chul-Hee;Kim, Do-Youb
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제5권2호
    • /
    • pp.179-187
    • /
    • 2013
  • Floating production storage and offloading (FPSO) facilities are used at most of the offshore oil fields worldwide. FPSO usage is expected to grow as oil fields move to deeper water, thus requiring the reliability and stability of mooring wires and risers in extreme environmental conditions. Except for the case of predictable attack angles of external loadings, FPSO facilities with turret single point mooring (SPM) systems are in general use. There are two types of turret systems: permanent systems and disconnectable turret mooring systems. Extreme environment criteria for permanent moorings are usually based on a 100-year return period event. It is common to use two or three environments including the 100-year wave with associated wind and current, and the 100-year wind with associated waves and current. When fitted with a disconnectable turret mooring system, FPSOs can be used in areas where it is desirable to remove the production unit from the field temporarily to prevent exposure to extreme events such as cyclones or large icebergs. Static and dynamic mooring analyses were performed to evaluate the stability of a spider buoy after disconnection from a turret during cyclone environmental conditions.

노트북 거치대가 건강한 젊은 성인 손목관절근육의 생체역학적 특징에 미치는 영향 (Effects of a Notebook Computer Supporter on Biomechanical Characteristics in Wrist Joint Muscles of Healthy Young Adults)

  • 마성룡;송창순
    • PNF and Movement
    • /
    • 제19권3호
    • /
    • pp.391-399
    • /
    • 2021
  • Purpose: As laptop use increases throughout the COVID-19 pandemic and its use outside of traditional workstations proliferates, it is imperative to expand the limited research available regarding ergonomic exposure. This study aimed to identify the effects of a laptop supporter on biomechanical characteristics in the wrist joint muscles of healthy young adults. Methods: This was a cross-sectional observational study design with thirty-four healthy young adults as participants. They conducted a typing exercise performed under two different conditions, which were with and without a notebook computer supporter. This study measured the biomechanical characteristics of the muscles of the wrist joints including the flexor carpi ulnaris (FCU), the flexor carpi radialis (FCR), the extensor carpi radialis longus (ECRL), and the extensor carpi ulnaris (ECU). Measurements were taken three times: before typing, immediately after typing for 30 minutes with a supporter, and immediately after typing for 30 minutes without a supporter. The statistical method to compare the three different measurement conditions was the repeated measures ANOVA. Results: The participants showed significantly different levels of dynamic stiffness in both the FCU before typing and immediately after 30 minutes of typing with a supporter, and showed significantly different levels of dynamic stiffness in the FCR before typing and immediately after 30 minutes of typing with a supporter. The dynamic stiffness level immediately after 30 minutes of typing without a supporter was significantly different than that immediately after 30 minutes of typing with a supporter. However, the muscle tone was not significantly different among the three different conditions. Conclusion: The results of this study revealed that a laptop supporter used to correct the eye level of the electronic screen increases the dynamic stiffness of the wrist joint flexors, so it is necessary to consider the neutral position of the wrist joint during typing.

디지털 방사선의학에서의 조사선량 설정과 인지에 대한 실태 - 대구 경북지역을 중심으로 - (A Study on the Exposure Parameter and the Patient Dose for Digital Radiography System in Dae Goo)

  • 조광호;강영한;김부순
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제31권2호
    • /
    • pp.177-182
    • /
    • 2008
  • 디지털 시스템이 가지는 장점인 영상판 검출기의 반응 범위(dynamic range)가 상당히 넓다는 것은 필름/증감지 시스템보다 더 높은 수준의 노광 관용도를 갖기에 재촬영이 줄어들고 영상관리에 효율적이지만, 조사조건의 설정범위가 상당히 넓어 필름/증감지 시스템의 엄격한 조사조건보다 더 많은 조사선량이 환자에게 노출 될 수도 있다. 본 연구는 디지털 시스템 하에서 일반촬영 시 방사선사 개인 별 조사선량에 대한 인식과 행위실태를 파악하여 환자피폭선량을 감소시킬 수 있는 방안을 마련하고, 방사선 선량관리의 중요성을 새로이 인식하고자 하였다. 디지털 시스템 하에서 근무 중인 방사선사의 조사조건 설정과 환자피폭선량 인지 실태를 파악해 본 결과 환자의 체형이나 상태, 촬영부위에 따라 최적의 조사선량을 적용하기 보다는 영상의 농도와 업무의 편의성에 따라 조사조건이 설정되고 있었다. 디지털 시스템이 도입되며 검출기의 반응 범위가 필름/스크린 시스템보다 넓어짐에 따라 조사조건 설정에 대해 관심이 소홀한 경향이 있었다. 따라서 디지털 방사선 시스템 하에서 환자 피폭선량의 감소를 위해 최적의 조사조건으로 영상을 얻어야 할 것이다. 또한 조사선량을 최소로 하고 환자 피폭선량을 줄이기 위해 업무 습관과 인식을 새로이 할 필요성이 있고, 지속적인 관심과 주기적인 교육 및 점검, 다양한 교육 기회제공 등이 필요하다고 본다.

  • PDF

Have you Exposure to a trauma and No PTSD? Which factors help and which are not?

  • Bulathwatta, Asanka;Witruk, Evelin;Reschke, Konrad
    • 식품보건융합연구
    • /
    • 제5권1호
    • /
    • pp.21-31
    • /
    • 2019
  • Exposure to a traumatic events gives people many post traumatic conditions resulting Post Traumatic Stress Disorder (PTSD) or Post Traumatic Growth (PTG). Some of them may come up with acute Stress Disorder and some may having with grievances. But most of people overcome their traumatic condition with using their Emotional Intelligence and Resilience capacities. This article is focused on indicating basic mechanisms and resources in which can be lead to have better social rehabilitation along with the matters that can be important in trauma coping. The later part of the article appeals the concept of social work theory highlighting the psych dynamic approach which can be impact positively on psycho social rehabilitation. Traumatic experiences are really unpredictable and it can be resulted Post Traumatic Stress Disorders, Post traumatic growth in the end. But developing skills that required to overcoming trauma is facilitated by the Emotional Intelligence, Resilience, and Coping capacities that people having with. Exposure to a traumatic experience and not having a PTSD is determined by the many other factors such as social support system and government facilitation of the wellbeing afterwards the trauma. Here in this article the basic components of Emotional Intelligence, Resilience, and coping mechanisms have been considered as the major factors.