• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.214-219
• /
• 1997

We propose a new scheme of high-resolution heterodyne interferometer that employs the two-axial mode He-Ne laser with an inter-mode beat frequency of 600-1000 MHz. An electronic RF-heterodyne circuit lowers the beat frequency down to 5 MHz, so that the phase change of the interferometer output is precisely measured with a displacement resolution of 0.1 nanometer without significant loss of dynamic bandwidth. A thermal control scheme is adopted to stabilize the cavity length with aims to suppress frequency drifts caused by the phenomena of frequency pulling and polarization anisotropy of the two-axial mode laser to a stability level of 2 parts in $10^9$. The two-axial mode HeNe laser yields a high output power of 2.0 mW, whlch allows us to perform multiple measurements of up to 10 machine axes simultaneously.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1699-1710
• /
• 2001

The characteristics of methanol and methanol blended (M85) sprays were investigated under atmospheric conditions at various temperature, ranging from on-vaporizing to vaporizing ambient conditions (298∼353 K). From laser scattering images, the macroscopic characteristics of the spray, such as the spray tip penetration and the spray angle, were determined. Entropy concept was introduced to represent homogeneity and PIV analysis was adopted to determine the fluid dynamic information at each location of the spray. The correlation between entropy and vorticity strength enabled us to find their relations. The effect of ambient composition, mainly of viscous effect as affected by CO$_2$levels, was investigated using PIV and entropy analysis. Spray width and entropy value were found to tend to decrease at increased CO$_2$levels.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.174-178
• /
• 1997

In this paper,we consider a LQG problem subject to the stochastic multirate system. By restating the problem as a periodic LQG problem, it is pointed out that the lack of measurements and control inputs in some time instants makes the problem singular. A method of transforming the problem into a nonsingular one enables us to obtain the solution,however which gives a resulting value of the LQG cost and the setimation error dynamic different with those of the original system. As a consequence, we present a optimal value of the original cost and the estimation error covariance of the original system,which are expressed by periodic Lyapunov equation respectively. The evaluation resulte can be exploited in comparing the control system performances and specifying the sampling rates.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.120-126
• /
• 2001

This study deals with a flow and pressure ripple characteristics for a hydrostatic transmission(HST) consisting of a vari-able axial piston pump connected in an open loop to a fixed displacement axial piston motor. These flow ripples produced by pump and motor in HST interacts with the source impedances of the pump or motor and dynamic characteristics of the connected pipeline, and results in a pressure ripples, Pressure ripples. Pressure ripples in HSP is major source of vibration, which can lead to fatigue failure of components and cause noise. In this paper, the flow ripples generated by a swash plate type axial piston pump or motor in HST are measured by making use of hydraulic pipeline dynamics and the measured pressure data at two points along the pipeline. By using the self-checking functions, the validity of the method us investigated by comparison with the measured and estimated pressure ripples at the halfway section of the pipeline, and good agreement is achieved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.103-108
• /
• 2001

The structure of hard disk drive(HDD) is excited by dynamic motion of a disk-spindle motor, and it makes sound noise. Therefore, the cover and the base of HDD should be designed to reduce noise and vibration induced by spindle motor. The prediction technique of sound pressure level(SPL) of a given structural shape enables us to design a cover and a base with much less vibration and noise. In this paper, we measured the force of disk-spindle motor and predicted SPL from HDD by computational simulation. To get a SPL of HDD by computational simulation, modal analysis and forced vibration analysis were performed with ANSYS, and sound radiation was computed using SYSNOISE. The calculated results were compared with experimental results and a good agreement was obtained. With this computer simulation procedure and design of experiment(DOE), optimal thickness of noise barrier and damper was calculated.

• The International Journal of Costume Culture
• /
• v.6 no.2
• /
• pp.105-116
• /
• 2003

The purposes of this study were to examine the fashion adopted by young women in the United States in the 1970s and to explore how the dynamic shifts toward feminist values influenced those fashion trends. Fifteen American women who were college students in the 1970s were interviewed for the study. Throughout the decade, casual and comfortable styles became more prevalent; for example, pants became widely accepted for formal occasions as well as informal occasions due to an overall emphasis on practicality. The feminist and civil rights movements along with more liberal attitudes toward religion were among the more dominant cultural values that influenced the respondents' choices in clothing styles. Feminist presentation was diverse extreme or eclectic - and constantly renegotiating itself. This study helped us better understand the dynamics involved between fashion and value changes as well as the influence of feminism on the 1970s fashion in the United States.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.349-357
• /
• 2016

The era of the Internet of Things (IoT) is upon us. In this era, minimizing power consumption becomes a primary concern for system-on-chip designers. While traditional power minimization and dynamic power management (DPM) techniques have been heavily explored to improve the power efficiency of devices inside very large-scale integration (VLSI) platforms, there is one critical factor that is often overlooked, which is the power conversion efficiency of a power delivery network (PDN). This paper is a tutorial that focuses on the power conversion efficiency of the PDN, and introduces novel methods to improve it. Circuit-, architecture-, and system-level approaches are presented to optimize PDN designs, while case studies for three different VSLI platforms validate the efficacy of the introduced approaches.

• Structural Engineering and Mechanics
• /
• v.51 no.3
• /
• pp.519-530
• /
• 2014

This paper attempts to investigate the nonlinear dynamic analysis of strong nonlinear problems by proposing a new analytical method called Hamiltonian Approach (HA). Two different cases are studied to show the accuracy and efficiency of the method. This approach prepares us to obtain the nonlinear frequency of the nonlinear systems with the first order of the solution with a high accuracy. Finally, to verify the results we present some comparisons between the results of Hamiltonian approach and numerical solutions using Runge-Kutta's [RK] algorithm. This approach has a powerful concept and the high accuracy, so it can be apply to any conservative nonlinear problems without any limitations.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.320-327
• /
• 2005

A new mechanism for hyper redundant manipulator (HRM) is presented, which comprises of serially assembled compound three-bar linkages (CTL). The CTL mechanism has some unique properties. This paper presents the forward and inverse kinematics of this mechanism and shows the simulation of the HRM havig 9 CTL units. The recursive algorithm of the inverse kinematics that the author originally developed is employed. It is fast and stable ; moreover, it enables us to obtain a solution in which the end-point of the HRM is controlled by a portion of joints. It also presents the method of the dynamical analysis. There exist kinematical constraints in the proposed closed linkage mechanism. In the dynamic analysis constraints are sufficiently sustained by the constraint stabilization method that the author developed. The mechanical structure of the HRM having some CTL units that is under construction is shown.

• Tribology and Lubricants
• /
• v.17 no.6
• /
• pp.476-481
• /
• 2001

This paper has been presented the hydrodynamic effect by the journal speed, eccentricity and source positions in order to overcome the defects of air bearing such as low stiffness and damping coefficient. Choosing the two row source position of air bearing is different from existed investigations in the side of pressure distribution of air film because of the high speed of journal and the wedge effects by the eccentricity. These optimal chooses of the two row source positions enable us to improve the performance of the film reaction force and loading force as making the high speed spindle. In this paper, The pressure behavior in theory of air film according to the eccentricity of journal and the source positions analyzed. The theoretical analysis have been identified by experiments. The results of investigated characteristics may be applied to precision devices like ultra-precision grinding machine and ultra high speed milling.