• Journal of radiological science and technology
• /
• v.42 no.2
• /
• pp.119-130
• /
• 2019

Positron emission tomography (PET) is widely used imaging modality for effective and accurate functional testing and medical diagnosis using radioactive isotopes. However, PET has difficulties in acquiring images with high image quality due to constraints such as the amount of radioactive isotopes injected into the patient, the detection time, the characteristics of the detector, and the patient's motion. In order to overcome this problem, we have succeeded to improve the image quality by using the dynamic image reconstruction method based on singular value decomposition. However, there is still some question about the characteristics of the proposed technique. In this study, the characteristics of reconstruction method based on singular value decomposition was estimated over computational simulation. As a result, we confirmed that the singular value decomposition based reconstruction technique distinguishes the images well when the signal - to - noise ratio of the input image is more than 20 decibels and the feature vector angle is more than 60 degrees. In addition, the proposed methode to estimate the characteristics of reconstruction technique can be applied to other spatio-temporal feature based dynamic image reconstruction techniques. The deduced conclusion of this study can be useful guideline to apply medical image into SVD based dynamic image reconstruction technique to improve the accuracy of medical diagnosis.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2015

Recently, handy pulse measurement method was introduced by using smart phone camera. However, measured values are not consistent with the variations of external light conditions, because the external light interfere with dynamic range of captured pulse image. Thus, adaptive dynamic range reconstruction algorithm is proposed to conduct pulse measurement robust to light condition. The minimum and maximum values for dynamic ranges of green and blue channels are adjusted to appropriate values for pulse measurement. In addition, sigmoid function based curve is applied to adjusted dynamic range. Experimental results show that the proposed algorithm conducts suitably dynamic range reconstruction of pulse image for the interference of external light sources.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.496-500
• /
• 2023

Fournier's gangrene is a life-threatening infection which requires prompt recognition, early surgical debridement of unhealthy tissue, and initiation of broad-spectrum antibiotics. Relook debridement are usually performed until all the devitalized tissue has been removed. Involvement of the anal sphincter may result in significant morbidity such as permanent incontinence. Dynamic reconstruction of the anal sphincter has always been one of the holy grails in the field of pelvic reconstruction. We demonstrate a new method of camera shutter style double-opposing gracilis muscle flaps that allows dynamic sphincteric function without the need for electrostimulation. The bilateral gracilis muscles are inset in a fashion that allows orthograde contraction of the muscle to narrow and collapse the neoanal opening. With biofeedback training, the patient is able to regain dynamic continence and return to function without a stoma. There was also no need for neurotization or microsurgery techniques to restore sphincteric function to the anus. The patient was able to reverse his stoma 14 months after the initial insult and reconstruction with biofeedback training without the use of electrostimulation.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.246-258
• /
• 2024

In aerospace and energy engineering, the reconstruction of three-dimensional (3D) temperature distributions is crucial. Traditional methods like algebraic iterative reconstruction and filtered back-projection depend on voxel division for resolution. Our algorithm, blending deep learning with computer graphics rendering, converts 2D projections into light rays for uniform sampling, using a fully connected neural network to depict the 3D temperature field. Although effective in capturing internal details, it demands multiple cameras for varied angle projections, increasing cost and computational needs. We assess the impact of camera number on reconstruction accuracy and efficiency, conducting butane-flame simulations with different camera setups (6 to 18 cameras). The results show improved accuracy with more cameras, with 12 cameras achieving optimal computational efficiency (1.263) and low error rates. Verification experiments with 9, 12, and 15 cameras, using thermocouples, confirm that the 12-camera setup as the best, balancing efficiency and accuracy. This offers a feasible, cost-effective solution for real-world applications like engine testing and environmental monitoring, improving accuracy and resource management in temperature measurement.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.145-150
• /
• 2008

This thesis explores the problem of reconstructing a three-dimensional(3D) scene given a set of images or image sequences of the scene. It describes efficient methods for the 3D reconstruction of static and dynamic scenes from stereo images, stereo image sequences, and images captured from multiple viewpoints. Novel methods for image-based and volumetric modelling approaches to 3D reconstruction are presented, with an emphasis on the development of efficient algorithm which produce high quality and accurate reconstructions. For image-based 3D reconstruction a novel energy minimisation scheme, Iterated Dynamic Programming, is presented for the efficient computation of strong local minima of discontinuity preserving energyy functions. Coupled with a novel morphological decomposition method and subregioning schemes for the efficient computation of a narrowband matching cost volume. the minimisation framework is applied to solve problems in stereo matching, stereo-temporal reconstruction, motion estimation, 2D image registration and 3D image registration. This thesis establishes Iterated Dynamic Programming as an efficient and effective energy minimisation scheme suitable for computer vision problems which involve finding correspondences across images. For 3D reconstruction from multiple view images with arbitrary camera placement, a novel volumetric modelling technique, Embedded Voxel Colouring, is presented that efficiently embeds all reconstructions of a 3D scene into a single output in a single scan of the volumetric space under exact visibility. An adaptive thresholding framework is also introduced for the computation of the optimal set of thresholds to obtain high quality 3D reconstructions. This thesis establishes the Embedded Voxel Colouring framework as a fast, efficient and effective method for 3D reconstruction from multiple view images.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.111-117
• /
• 2007

Objective : The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. Methods : A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. Results : In overall, 26 [83.9%] of 31 showed excellent or good outcomes. Thirteen percent [4 cases] of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven [22.6%] patients had reconstruction failure:5 [20.8%] in the 1-level corpectomy group and 2 [28.5%] in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. Conclusion : Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconstruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.1
• /
• pp.1-16
• /
• 2019

Dynamic contrast enhanced (DCE) magnetic resonance (MR) imaging plays an important role in non-invasive detection and characterization of primary and metastatic lesions in the liver. Recently, efforts have been made to improve spatial and temporal resolution of DCE liver MRI for arterial phase imaging. Review of recent publications related to arterial phase imaging of the liver indicates that there exist primarily two approaches: breath-hold and free-breathing. For breath-hold imaging, acquiring multiple arterial phase images in a breath-hold is the preferred approach over conventional single-phase imaging. For free-breathing imaging, a combination of three-dimensional (3D) stack-of-stars golden-angle sampling and compressed sensing parallel imaging reconstruction is one of emerging techniques. Self-gating can be used to decrease respiratory motion artifact. This article introduces recent MRI technologies relevant to hepatic arterial phase imaging, including differential subsampling with Cartesian ordering (DISCO), golden-angle radial sparse parallel (GRASP), and X-D GRASP. This article also describes techniques related to dynamic 3D image reconstruction of the liver from golden-angle stack-of-stars data.

• Smart Structures and Systems
• /
• v.28 no.6
• /
• pp.827-838
• /
• 2021

The dynamic displacement is considered to be an important indicator of structural safety, and becomes an indispensable part of Structural Health Monitoring (SHM) system for high-speed railway bridges. This paper proposes an indirect strain based dynamic displacement reconstruction methodology for high-speed railway box girders. For the typical box girders under eccentric train load, the plane section assumption and elementary beam theory is no longer applicable due to the bend-torsion coupling effects. The monitored strain was decoupled into bend and torsion induced strain, pre-trained multi-output support vector regression (M-SVR) model was employed for such decoupling process considering the sensor layout cost and reconstruction accuracy. The decoupled strained based displacement could be reconstructed respectively using box girder plate element analysis and mode superposition principle. For the transformation modal matrix has a significant impact on the reconstructed displacement accuracy, the modal order would be optimized using particle swarm algorithm (PSO), aiming to minimize the ill conditioned degree of transformation modal matrix and the displacement reconstruction error. Numerical simulation and dynamic load testing results show that the reconstructed displacement was in good agreement with the simulated or measured results, which verifies the validity and accuracy of the algorithm proposed in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.451-462
• /
• 2003

At the paper the method of 3D holographic moving image reconstruction is discused. The main idea of this method is based on the substitution of optically created static hologram by equal diffraction array created by acoustical (AO) field which formed by bulk sound waves. Such sound field can be considered as dynamic optical hologram, which is electrically controlled. At the certain moment of time when the whole hologram already formed, the reference optical beam illuminates it, and due to acoustooptical interaction the original optical image is reconstructed. As the acoustically created dynamic optical hologram is electronically controlled, it can be used for moving 3-dimentional scene reconstruction in real time. The architecture of holographic display for moving scene reconstruction is presented at this paper. The calculated variant of such display laboratory model is. given and discussed. The mathematical simulation of step by step images recording and reconstruction is given. The pictures of calculated reconstructed images are presented. The prospects, application areas, shortcomings and main problems are discussed.

• Journal of Information Display
• /
• v.4 no.3
• /
• pp.29-34
• /
• 2003

At the paper the method of 3D holographic moving image reconstruction is discused. The main idea of this method is based on the substitution of optically created static hologram by equal diffraction array created by acoustical (AO) field which formed by bulk sound waves. Such sound field can be considered as dynamic optical hologram, which is electrically controlled. At the certain moment of time when the whole hologram already formed, the reference optical beam illuminates it, and due to acoustooptical interaction the original optical image is reconstructed. As the acoustically created dynamic optical hologram is electronically controlled, it can be used for moving 3-dimentional scene reconstruction in real time. The architecture of holographic display for moving scene reconstruction is presented at this paper. The calculated variant of such display laboratory model is given and discussed. The mathematical simulation of step by step images recording and reconstruction is given. The pictures of calculated reconstructed images are presented. The prospects, application areas, shortcomings and main problems are discussed.