• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.385-388
• /
• 2002

We measured and evaluated digital, pre-sampling and overall imaging properties (characteristic curves, Modulation Transfer Function (MTF), Wiener spectra (WS), Noise Equivalent Quanta (NEQ) and Detective Quantum Efficiency (DQE)) for the direct type and indirect type of Flat-Panel Detector (FPD). First, the digital and overall characteristic curves of the both types of FPD had more wide dynamic range than that of the S/F system. Second, the pre-sampling and overall MTF of the direct-type FPD were superior to those of the indirect-type FPD. Third, for identical exposures, the digital and overall WS of the direct-type FPD were similar or worse than those of the indirect-type FPD, and for larger exposure, the digital WS of the both types of FPD were smaller, but overall WS of the both types of FPD were larger. Fourth, the digital and overall NEQ and DQE of the direct-type FPD were worse than both NEQ and DQE of the indirect-type FPD at lower spatial frequencies, but were better at higher spatial frequencies.

• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.463-472
• /
• 2019

The mode perturbation method (MPM) is suitable and efficient for solving the eigenvalue problem of a nonuniform soil deposit whose property varies with depth. However, results of the MPM do not always converge to the exact solution, when the variation of soil deposit property is discontinuous. This discontinuity is typical because soil is usually made up of sedimentary layers of different geologic materials. Based on the energy integral of the variational principle, a new mode perturbation method, the energy-based mode perturbation method (EMPM), is proposed to address the convergence of the perturbation solution on the natural frequencies and the corresponding mode shapes and is able to find solution whether the soil properties are continuous or not. First, the variational principle is used to transform the variable coefficient differential equation into an equivalent energy integral equation. Then, the natural mode shapes of the uniform shear beam with same height and boundary conditions are used as Ritz function. The EMPM transforms the energy integral equation into a set of nonlinear algebraic equations which significantly simplifies the eigenvalue solution of the soil layer with variable properties. Finally, the accuracy and convergence of this new method are illustrated with two case study examples. Numerical results show that the EMPM is more accurate and convergent than the MPM. As for the mode shapes of the uniform shear beam included in the EMPM, the additional 8 modes of vibration are sufficient in engineering applications.

• 아태비즈니스연구
• /
• 제8권1호
• /
• pp.33-44
• /
• 2017

The present study aims to examine the role of market orientation as an international partnership property. This property, labeled export-venture market orientation, is at the inter-firm level and is related to the new market development (NMD) activities of export-ventures. Specifically, this article is to define the export-venture market orientation; to argue that it is a major factor in NMD export-venture success; and to argue that the resource-advantage (R-A) theory of competition can provide a theoretical foundation for this concept and explain its contribution to export-ventures' international expansion success. This manuscript is conceptual in approach. In their efforts to strengthen relationships, export-ventures may tend to focus so much time on the partnership factors that they miss market opportunities. As a spanning process, NMD should be informed by both external and internal activities. In an export-venture, market orientation helps guide NMD activities from outside to inside and vice versa. As a dynamic and disequilibrium provoking process, the R-A theory can theoretically ground the concept of export-venture market orientation and explain its role in NMD export-venture success. The current study contributes to business marketing theory in three ways: it extends the concept of intra-organizational market orientation to an inter-organizational context; contributes to understanding the role of idiosyncratic resources in export-ventures; and theoretically explains the concept of export-venture market orientation. The present study is the first to extend the concept of market orientation into inter-organizational NMD framework and to examine the role of export-venture market orientation in NMD export-venture success.

• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.39-45
• /
• 2006

다양한 에폭시 수지를 함유한 언더필의 열적 특성을 시차주사열량측정법, 열중량측정법, 동적-기계적 분석법, 열적-기계적 분석법과 같은 열 분석법을 이용하여 분석하였다. 또한, 언더필과 FR-4기판 사이의 접합 강도를 측정하였다. Cycolaliphatic 에폭시 수지를 함유한 언더필의 유리 전이 온도가 cycolaliphatic 에폭시 수지를 함유하지 않은 언더필의 유리 전이 온도보다 낮음을 확인할 수 있다. 대기로부터 유입된 산소와 열화된 폴리머 사이의 화학적 반응으로 인하여 언더필의 열적 감소 반응이 두 번 발생하는 것을 확인할 수 있다. Cycolaliphatic 에폭시 수지를 함유한 언더필의 열팽창 계수가 cycolaliphatic 에폭시 수지를 함유하지 않은 언더필의 열팽창 계수보다 높음을 확인할 수 있다. 과도한 경화 온도는 에폭시 수지의 경계면을 약하게 하여 에폭시 수지의 기계적 특성의 변화를 초래하게 되고 언더필과 FR-4 기판 사이의 접합 특성을 저하시키게 된다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3706-3710
• /
• 2012

A novel silicon-containing arylacetylene resin (MSAR) modified by dipropargyl ether of bisphenol A (DPBPA) and dipropargyl ether of perfluorobisphenol A (DPPFBPA) was prepared separately. The curing behaviors of modified resins, DPBPA/MSAR and DPPFBPA/MSAR, were characterized with differential scanning calorimeter (DSC). The kinetic parameters of modified resins were obtained by the Kissinger and Ozawa methods. The results of dynamic mechanical analysis (DMA) revealed that the glass transition temperature ($T_g$) of the cured DPBPA/MSAR reached $486^{\circ}C$. According to the thermogravimetric analysis (TGA), the decomposition temperature ($T_{d5}$) of the cured resins and char yield ($Y_c$, $800^{\circ}C$) decreased as the dipropargyl ether loadings increased, especially in air. With the same weight loading, thermal stability of DPBPA/MSAR was better than that of DPPFBPA/MSAR. The carbon fiber (T300) reinforced composites exhibited excellent flexural properties at room temperature with a high property retention at $300^{\circ}C$.

• 대한치과보철학회지
• /
• 제38권6호
• /
• pp.782-790
• /
• 2000

The mainly used polymeric material for the denture is PMMA because of its cost and easiness to handle. So it was widely used material among dentists for past decades. But the acrylic-based denture materials have several common weak points such as shrinkage after curing and lack of strength. In order to solve these problems, we adapted one of hybrid system using acrylic polymer and vinyloligosilsesquioxane(POSS). POSS, which is a well known expandable monomer during polymerization process, may eventually suppress volumetric shrinkage. And the hybrid system makes it possible for the polymer to be stable in various severe conditions. Eight different kinds of samples were designed and synthesized. Each samples were characterized with dynamic mechanical analyser(DMA) to confirm their thermodynamic properties, fractured to analyze the cross-sectional morphology of the samples. And elongation, flexural and impact tests were also executed to evaluate the mechanical properties of the samples. From the results, hybrid composites had well defined crosslinked network structure compared to the widely used denture materials, and the mechanical strength improved without changing any surface condition as increment with POSS ratio in hybrid system. Fractured morphology showed homogeneous surfaces in spite of mutli component system, therefore we can conclude that the adoption of the POSS brought the reinforcement of the denture resin.

• 청정기술
• /
• 제14권3호
• /
• pp.193-203
• /
• 2008

피혁 제조 공정에서 계면활성제는 세정목적, 분산성 그리고 고착성 등을 부여하기 위해 사용되고 있다. 그러나 기존의 피혁 공정에서 사용되고 있는 계면활성제는 친수성기가 다량 포함되어 있어 향후 피혁 시장에서 요구될 것으로 기대되는 내오염성, 내수성, 내구성 통의 고기능성 특성을 재현하는데 문제점이 있다. 본 연구에서는 기존의 탄화수소 계열의 계면활성제의 문제점을 보완하기 위해서, 탄소-불소의 강한 결합에너지로 인한 표면장력 감소, 분산력 증대, 세정효과, 크롬 흡착력 증대 등의 특성을 나타내는 불소계 계면활성제를 제조하였다. 불소계 계면활성제의 사용으로 피혁 제조 공정의 분산성 증대, 침투력 상승 및 결합력을 향상시켜 크롬 흡착률 증가, 탄닝 폐수 배액의 크롬 함량 감소, 생물학적 산소 요구량, 화학적 산소 요구량의 함량 감소 및 물리적 특성이 향상되는 것을 확인하였다.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.173-179
• /
• 2000

3가지 대표적인 가황계인 conventional vulcanization(Conv), semi-efficient vulcanization (Semi-EV), efficient vulcanization(EV)방법을 카본블랙 충전 천연고무 배합고무에 대해 적용하고, 이들 가황계에 따른 가황특성, 인장특성, 동적 점탄성을 조사하였다. 또한 가황온도가 배합고무의 기계적 물성과 노화저항성에 미치는 영향도 조사하였다. Conv 가황계가 Semi-EV나 EV 가황계에 비해 가황속도는 낮았으나 최대 토오크는 높았다. 인장특성은 Conv 가황계가 Semi-EV나 EV 가황계에 비해 높은 모듈러스를 나타내었고, 파괴점에서의 인장강도는 유사한 반면 신장율은 낮았다. 가황온도 증가에 따라 경도, 모듈러스 및 인장강도는 감소하였고, 감소 정도는 EV나 Semi-EV 가황계가 Conv 가황계보다 낮았다. 또한 열노화에 대한 저항성은 EV 가황계가 Conv 가황계보다 월등히 우수하였다.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.103-113
• /
• 2022

세계화가 진행됨과 동시에 지역화가 이루어지면 지역문화에 대한 관심이 더 높아지고 있는 추세이다. 이러한 흐름에 맞춰 문화재청은 2016년부터 야간형 문화재 관광 콘텐츠로 '문화재 야행(夜行)' 사업을 추진하고 있다. 지역재생 사업의 일환인 문화재 야행은 지역의 문화유산을 중심으로 다양한 역사, 문화 관련 콘텐츠를 융·복합하여 새로운 부가가치를 창출한다. '문화재 야행(夜行)'이 크게 활성화 된 상황이지만, 지속적으로 이어가기 위해서는 변화가 필요하다고 판단된다. 고정된 야행 프로그램(8야(夜))이 전국적인 네트워크를 구축한다는 측면에서는 긍정적이지만, 획일화되어 다양한 형태로 확장하지 못하는 한계가 있기 때문이다. 이에 본 연구에서는 야행 프로그램의 의미와 한계를 파악하고, 야행 프로그램에 적용 가능한 인지시학 이론을 고찰하였다. 이러한 과정을 통해 인지시학의 '역동적 의미 구성을 위한 원형', '초현실적인 전경', '시간과 공간에서의 모험'이 야행 프로그램에 적용 가능하다는 것을 확인하였다. 실제로 인지시학을 야행 프로그램에 결합해 본 결과, 기존의 야행 프로그램과 차별화 된 야행 프로그램 구현 전략을 제시할 수 있었다.

• Geomechanics and Engineering
• /
• 제25권3호
• /
• pp.195-205
• /
• 2021

Time effect on the deformation and strength characteristics of geogrid reinforced sand retaining wall has become an important issue in geotechnical and transportation engineering. Three physical model tests on geogrid reinforced sand retaining walls performed under various loading conditions were simulated to study their rate-dependent behaviors, using the presented nonlinear finite element method (FEM) analysis procedure. This FEM was based on the dynamic relaxation method and return mapping scheme, in which the combined effects of the rate-dependent behaviors of both the backfill soil and the geosynthetic reinforcement have been included. The rate-dependent behaviors of sands and geogrids should be attributed to the viscous property of materials, which can be described by the unified three-component elasto-viscoplastic constitutive model. By comparing the FEM simulations and the test results, it can be found that the present FEM was able to be successfully extended to the boundary value problems of geosynthetic reinforced soil retaining walls. The deformation and strength characteristics of the geogrid reinforced sand retaining walls can be well reproduced. Loading rate effect, the trends of jump in footing pressure upon the step-changes in the loading rate, occurred not only on sands and geogrids but also on geogrid reinforced sands retaining walls. The lateral earth pressure distributions against the back of retaining wall, the local tensile force in the geogrid arranged in the retaining wall and the local stresses beneath the footing under various loading conditions can also be predicted well in the FEM simulations.